mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
11 174 Commity
31 Gałęzie
58 Tagi
50 MiB
Wykres commitów

46 Commity (867aeb7d0908a495b1118ceb012bbbc2143f5baa)

Autor SHA1 Wiadomość Data
Povilas Kanapickas 6cb39e0a29 genesys: Add support for Plustek Opticfilm 8200i 2020-03-27 21:29:28 +02:00
Povilas Kanapickas adaac29d90 genesys: Add support for Plustek Opticfilm 7400 2020-03-27 21:29:27 +02:00
Ralph Little c4a88e6bf4 genesys: renamed HP ScanJet 3670C to 3670. Model has no C suffix 2020-01-07 22:52:14 -08:00
Povilas Kanapickas f8623e8f53 genesys: Add support for Plustek OpticFilm 7500i 2019-10-12 18:23:56 +03:00
Povilas Kanapickas 20da3df501 genesys: Add support for Plustek Opticfilm 7300 2019-10-12 18:23:55 +03:00
Povilas Kanapickas ef29ed60c2 genesys: Implement support for Plustek Opticfilm 7200i 2019-09-30 00:58:57 +03:00
Povilas Kanapickas 0c1dded259 genesys: Enable support for CanoScan 8400F 2019-07-20 03:11:22 +03:00
Povilas Kanapickas 1a641316b0 genesys: Remove duplicate entry of Canon 5600F in config file 2019-07-06 21:02:26 +03:00
Povilas Kanapickas 33a60dcc7b genesys: Implement support for 8600F 2019-05-18 14:56:02 +03:00
Jörg Frings-Fürst 5c0812c51b genesys.conf: fix comment typo 2017-05-13 18:38:43 +09:00
Stéphane Voltz 128c8931b3 add putative support for LiDE 120 2015-03-17 22:23:21 +01:00
Stéphane Voltz 470594e18b initial support for LiDE 220 2015-02-26 22:26:00 +01:00
Stéphane Voltz c88b3bc228 add LiDE 80 device description 2013-10-19 21:24:34 +02:00
Stéphane Voltz 2d7ebd42ea experimental code for GL845 based Opticbook 3800 
- add GL845 ASIC which is almost identical to the GL846
- add Opticbook 3800 to genesys backend
 2013-06-26 06:51:55 +02:00
Stéphane Voltz 0897a60c60 genesys backend update 
- groundwork for gl846 support
- asic init rework
- several refactors
 2013-01-28 22:04:37 +01:00
Stéphane Voltz aa160f50f6 initial Canonscan 4400F work 
- add 4400F to devices
- add settings for 100 dpi scan
 2012-10-24 21:21:13 +02:00
Stéphane Voltz d0931a27c8 update HP N6310 description 2011-11-20 08:05:39 +01:00
Stéphane Voltz c84445039d add HP 4850c as an untested gl843 device 2011-11-19 09:50:44 +01:00
m. allan noah 8607f65505 Revert "Applied patch for HPN6310" 
This reverts commit f7a0ef6817.
 2011-10-18 20:47:56 -04:00
JAZ f7a0ef6817 Applied patch for HPN6310 2011-10-17 12:27:09 +05:30
Stéphane Voltz 08b5abc8ca add Xerox 2400 onetouch model 2011-04-20 21:42:49 +02:00
Stéphane Voltz 107374b4fe misc genesys updates 
- add or tune entry for 5600f/700f
- fix HP2300 warming up problem
 2010-12-28 21:01:46 +01:00
Stéphane Voltz 6df16ae86c add opticbook 3600 to genesys.conf.in 2010-12-27 07:01:01 +01:00
Stéphane Voltz 35f133c59b add an device entry for LiDE 210 2010-12-15 06:24:55 +01:00
Stéphane Voltz 3d89a6f880 add new gl124 asic 
create a place holder for low level commands

move low level functions to genesys_low.c

GL124 progresses

enable genesys_low debug and add DAC for LiDE 110

gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version

GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded

LiDE110 WIP

GL 124 WIP
- definition and use of get/set double/triple
- define register names

all mods done, ready to test

set fe OK

GL124 WIP : ready to test scans

GL124 WIP

GL124 WIP
- fixed analog fe issue: don't put afe regs in global set

GL124 : first light at 300 dpi

GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved

solved rounding errors for gl124

re-add 400, 200 and 100 dpi modes

GL124 : tous x dpi OK

before adding line cropping

GL124 : line cropping almost finished

GL124 WIP : working line deletion

compute step rework

GL124 WIP : high speed table for dpi <= 300

move to scan area working

line skipping fix

new slope table for 600 dpi base

geometry and movement tuned

GL124 WIP : shading calibration almost working

working 600 dpi shading

GL124 : working shading calibration for all modes but 1200 dpi

working 1200 dpi shading

beta 1 of GL124 support

last tuning

update genesys.desc for LiDE 110

motor slope and start area tuning

shading coefficient computing clean up

add support for GL124 based CanoScan LiDE 110

feed almost OK up to 300 dpi

feeding is fixed

all issues fixed
 2010-12-14 18:23:23 +01:00
Stéphane Voltz 561bcd09a9 add test value for G4010 2010-09-28 21:36:02 +02:00
Stéphane Voltz a8eaac4a8d update HP3690 status to supported 2010-09-13 06:19:47 +02:00
Stéphane Voltz 084efdb37c about to reach first light state 
- fe is set
- slope tables are written (but not table 2)
- compile warnings are fixed
 2010-08-02 06:36:26 +02:00
Stéphane Voltz 5810169cde first gl843 steps 
- clone gl847
- add KV-SS080 entry with provisional values
 2010-08-02 06:36:26 +02:00
Stéphane Voltz 4b2bb4f793 add an entry for Canoscan 5600F in the genesys backend 2010-08-02 06:32:11 +02:00
Stéphane Voltz 188411dd3f before LiDE 100 init 2010-04-30 14:26:31 +02:00
Stéphane Voltz 3dba8c1d66 WIP setup optical regs ~OK 2010-04-25 21:32:44 +02:00
Stéphane Voltz 8cbf99c051 add Xerox Travel Scanner 100 2010-01-30 14:15:32 +01:00
Stéphane Voltz 3cfa6b8058 small cleanup 2010-01-19 21:39:29 +01:00
Stéphane Voltz f5d5d067e8 add visioneer 7100 support 
- add visioneer 7100 support, patch by Jack McGill
 2010-01-19 21:39:28 +01:00
Stéphane Voltz ef4c5102ca add support for Ambir/Syscan DS685 2009-12-05 07:26:25 +01:00
Stéphane Voltz f7eb4b000d add docket port 467 model 2009-11-25 20:59:10 +01:00
Stéphane Voltz 844c1da642 calibration and configuration fix 
- fixed genesys.conf for 2 missing models
- updated desc file
- definitive fix for shhetfed calibration
 2009-11-16 21:30:09 +01:00
Pierre Willenbrock 3b13986395 Add Syscan 485, DCT 487; update descriptions for Syscan 
Thanks again to Jack McGill.
 2009-05-20 00:31:32 +02:00
Pierre Willenbrock 34717f1db0 Add Pentax DSmobile 600 
Thanks go to Jack McGill for providing the model specific settings.
 2009-05-19 16:24:59 +02:00
Pierre Willenbrock 5864030834 Add basic support for Visioneer XP100 rev 3 and USB IDs for Syscan DocketPort 465 2009-03-19 22:27:53 +00:00
Pierre Willenbrock c53a50cbfb Add support for Visioneer Roadwarrior 2009-02-28 18:03:44 +00:00
Pierre Willenbrock c8ce0f00ef Add support for Ambir/Syscan DocketPORT 665 2009-02-28 18:01:50 +00:00
Stéphane Voltz ea76aef8a2 - rewrite of gl646 internals to enable easy addition of new models 
- rewrite of calibration process to make it more robust and accurate
	- untested full support for hp3670
	- untested support for 50, 100 and 300 uncalibrated scans for hp2400
	- use of id for device parts descriptions instead of using fixed
	  place in tables
 	- SCAN_MODE_* defines to clean up code
 2009-02-27 12:37:16 +00:00
Stéphane Voltz 81953325e8 - add support for uncalibrated scan for Visioneer Strobe XP200 
- button support for MD5345, HP2300 and XP200
 2009-01-19 05:46:43 +00:00
Henning Geinitz 872e619e13 Renamed backend configuration files from *.conf to *.conf.in. The configuration 
files are preprocessed by backend/Makefile now and variables like @DATADIR@ are
substituted by the appropriate directories. This is especially useful for
firmware locations. For the firmware paths for the artec_eplus48u, gt68xx, and
snapscan backends variables were used. Bug #302590.
 2006-01-05 16:27:10 +00:00