517751ff09
Added hp5400 backend from Martijn van Oosterhout <kleptog@svana.org> and
...
Thomas Soumarmon <soumarmt@nerim.net>. Changed to use sanei_usb instead of
direct /dev/usb/scanner access. Added manual page. Fixed some portablility
issues and some warnings. Added SANE headers.
2003-04-17 09:19:25 +00:00
87387511b0
Added IBM backend for the IBM 2456, the Ricoh IS-420 and maybe the IS-410 and
...
IS-430 from mf <massifr@tiscalinet.it>. Added manual page, fixed some
warnings, Added detection for IS-410 and IS-430.
2003-04-15 09:54:00 +00:00
3b43770843
Second try to fix problem with null-pointer in sane_control_option
2003-04-14 19:29:37 +00:00
b35cbffda9
check pointer received from sane_control_option()
2003-04-14 18:20:41 +00:00
dfe765e251
Fixed some compilation warnings.
2003-04-13 13:25:15 +00:00
d60a4441d1
Fixed warning for dll-preload.c.
2003-04-13 13:21:11 +00:00
98894a03c6
Remove test for multi-pass.
2003-04-11 09:39:31 +00:00
eda0c4bc5e
Updated Mustek BearPaw 1200 CU Plus white strip value. Set Mustek ScanExpress
...
A3 USB to CCD. Black mark may be still wrong. Minor formatting changes in the
manpage. Decreased ScanExpress A3 USB status to alpha because of CIS/CCD
change.
2003-04-11 09:37:24 +00:00
04dd7d101f
Added support for OS/2 (from Franz Bakan <fbakan@gmx.net>).
2003-04-10 08:36:10 +00:00
2b0ea7786e
Removed last change in offset/gain calculation, which croaked for some
...
cases. Give up early if we can't talk on the USB.
Added option to force scanner recalibration.
2003-04-05 19:44:04 +00:00
4d4f8a4c64
Added some missing debug messages. Fixed a warning.
2003-04-04 10:26:20 +00:00
2efe9ab441
Fixed some warnings.
2003-04-03 16:39:56 +00:00
8fb02e0e36
Fixed a bunch of compilation warnings.
2003-04-03 16:20:47 +00:00
967a3b2a37
Fixed some warnings.
2003-04-02 22:41:54 +00:00
5eba8d93a2
One fatal and various minor bug fixes in mustek_pp.c.
2003-04-02 21:58:44 +00:00
4236b5982c
Enabled 1200 DPI for Acer 5000
2003-04-02 21:22:53 +00:00
e30553a7c5
SnapScan backend 1.4.25
2003-04-02 21:01:07 +00:00
284ff7a543
Initialize global variables in sane_init.
2003-04-02 15:02:42 +00:00
a2e76b2942
Remove Chris Pinkham as active maintainer because his primary email address
...
bounces, the website is dead and he doesn't respond to mails to other
addresses. Marked email addresses and website as dead. Fixed AT3 misdectection
that was on the TODO list for some time.
2003-04-02 14:40:48 +00:00
27beb7d01b
Fixed comment headers. They were copied verbatim from the dll backend.
2003-04-02 14:04:06 +00:00
088281c4e1
Added support for IPv6. Updated manpages. Patch from Julien BLACHE
...
<jb@jblache.org>.
2003-03-30 19:07:18 +00:00
bfdf791597
added fujitsu fi-4120C support
2003-03-28 14:46:17 +00:00
5652917dd6
Added workaround for GT-8000 scanner, fixed two warnings reported by der Mouse.
2003-03-26 23:18:58 +00:00
8ce6e0d515
Updated the avision backend to latest build. This includes user-space
...
USB support and OS/2 thread handling.
2003-03-25 01:43:35 +00:00
c6d5ebe9fb
Modified behaviour of the option "eject after each scan":
...
Eject is suppresed for film scanners after preview scans.
2003-03-22 16:31:52 +00:00
341f58125e
Fixed segmentation fault when $PATH is not set.
2003-03-17 19:33:00 +00:00
86a3214291
patch from Ron Cemer <ron@roncemer.com>
...
fixes the broken "ADF empty" detection on the Fujitsu scanners
when connected via USB. It also fixes a sense-request issues,
which were required in order to determine whether the ADF is
empty. It also eliminates some duplicate code blocks.
renamed some functions
2003-03-14 18:21:22 +00:00
a84d4a611f
Added Packard Bell Diamond 1200 Plus to .desc and manpage. New flag to avoid
...
running stop_scan before doing a scan. The Windows firmware of the BearPaw
1200 CU Plus doesn't seem to like that.
2003-03-13 17:18:29 +00:00
711bb118b4
displays the offending byte when something is wrong in the
...
window descriptor block.
2003-03-10 12:38:36 +00:00
61c2a6aa24
Fixed two calibration bugs: one occasionally caused overexposed images
...
at all resolutions; the other one occasionally caused color inbalances
when scanning narrow areas at high resolutions.
2003-03-09 20:32:49 +00:00
8d9c13ed82
Minor debug message updates. Fixed a little bug in sane_control_option (gamma
...
control). Removed the signal blocking again. That only hides the segfault in
sanei_scsi. Check if there are documents in ADF for Paragon 2. Otherwise
return error. Fix some minor issues in reading the config file.
2003-03-07 19:31:26 +00:00
0bb508a879
Small requests are done with a response buffer of 8 bytes (instead of 64)
...
now. Looks like GT-6816 based scanners return 8 bytes if the firmware is
loaded and 64 bytes if it's not loaded. Changed GT-6816 firmware check to
ignore errors from above change. GT-6816 scanners work with the BSDs now (at
least once). Updated manpage concerning the BSDs.
2003-03-06 14:27:54 +00:00
6a0dd9cd5e
Added missing option size (avoids crash on network scanning). Patch from Milon
...
Firikis <milonf@hotpop.com>.
2003-03-05 18:04:33 +00:00
f9d7350534
* backend/fujitsu.c, backend/fujitsu.h: renamed some variables
...
* backend/fujitsu.c: gray duplex scanning now works with the 4097D
when disconnect is enabled in the scsi-controller
* doc/descriptions/unsupported.desc: remove fujitsu fi4120C
* doc/descriptions/fujitsu.desc added fi4120C, ScanParter 93GX
2003-03-05 12:56:44 +00:00
ca786b2c28
Bug-fix update for Genius, HP2100c and EPSON Photo devices.
2003-03-03 14:34:20 +00:00
a04ea4b251
Make sure that the firmware for plustek-like scanners is loaded. Didn't work
...
for Genius vivid3xe. Added both Genius scanners to man page. Removed warning
from Genius Vivid3xe.
2003-03-02 22:08:50 +00:00
6520e41917
*** empty log message ***
2003-03-02 06:55:18 +00:00
bf3546ca14
adjusted backend/canon-sane.c to use the new sanei_constrain_value()
...
made some cosmetic changes to reduce the number of compiler warnings
2003-02-28 09:35:24 +00:00
4b00890161
Added Genius Colorpage Vivid3xe. Added request_type and request fields to the
...
command set. Request is 0x01 or 0x04.
2003-02-27 17:31:52 +00:00
4fe497b559
* modified the Canon SCSI backend (now version 1.12):
...
* backend/canon.c, canon-sane.c, canon.h: Added support for
the FB1200S flatbed scanner.
* backend/canon.c: Made the sense handler generate meaningful
status information for new scanner models (solved the Mandrake
crash problem).
* backend/canon.c, canon-sane.c, canon.h: Moved model-dependent
declarations and decisions to a common location.
* backend/canon-sane.c: Fixed the out-of-memory problem of
xscanimage when doing previews with scanners using hardware
scan resolutions only.
2003-02-26 13:50:00 +00:00
5ed8c99cb7
- changed 'gain' option name to 'brightness'
...
- changed 'highlight' option name to 'contrast'
2003-02-25 07:04:12 +00:00
747619ae5f
Added new backend ma1509 for Mustek BearPaw 1200F scanners.
2003-02-24 21:04:08 +00:00
d152930b5e
incremented BUILD in pie.c (missed in last change)
2003-02-23 17:12:51 +00:00
0423675807
fixed segmentation faults in pie.c when sane_init/sane_exit called more than once
2003-02-23 13:32:52 +00:00
711f602c76
- reset global vars when needed
...
- fixed a bug when th device name used was ""
2003-02-23 08:54:16 +00:00
3cf8377bee
Initialize global variables in sane_init.
2003-02-22 16:54:22 +00:00
7e4fe2df10
Iniatialize global variables explicitely. Mention ma1509.
2003-02-22 16:48:02 +00:00
8dedb6c862
Explicitely initialize global variables to avoid segfaults when calling
...
sane_init/sane_exit more than once.
2003-02-22 16:22:25 +00:00
b0d7681738
Initialize global variables in sane_init to avoid segmentation faults when
...
sane_init/sane_exit is run more than once.
2003-02-22 15:37:19 +00:00
a0251b6cc1
Added vid/pid 0x07b3/0x0400 to gt68xx.conf also. Added indormation about
...
Medion 4394. Mention ma1509 backend. Fix segfault when calling sane_open with
an empty device name.
2003-02-22 15:34:51 +00:00
Henning Geinitz