mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
245 Commity
32 Gałęzie
58 Tagi
50 MiB
Wykres commitów

245 Commity (4014e4479e39bc37fc73665f35393cd271daa823)

Autor SHA1 Wiadomość Data
Henning Geinitz 4014e4479e Removed entry about Polaroid SprintScan 35LE (now in 
microtek).
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-24 18:37:57 +00:00
Henning Geinitz 903108f6e7 Removed umax from lists of backends with sane_get_devices 
and config_line bug. Removed entry about make uninstall and
sanei_wire.c bug. Removed entry about microtek update. Added point
about adding sane(7) to any manual page.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-24 18:36:17 +00:00
Matto Marjanovic 4b668811ee Updated ChangeLog (to include changes to microtek backend yesterday). 2001-05-24 14:11:54 +00:00
Stéphane Voltz ea37f01ae9 * added entry for backend/umax_pp.c and backend/umax_pp_low.c changes 2001-05-23 06:17:47 +00:00
Karl Heinz Kremer d0f9e70017 Karl Heinz Kremer <khk@khk.net> 
Added sense handler to support the GT-8000 scanner.
Also added experimental (and #ifdef protected) USB scanner probing
code - requires patch to USB scanner driver.
 2001-05-22 23:52:46 +00:00
Henning Geinitz 0236fc5e03 Added "man sane" to quick install. Added paragraph about old 
versions. Added paragraph about "make clean" and "make
distclean". Added section about removing SANE.
 2001-05-21 20:31:07 +00:00
Henning Geinitz dcce0c8461 Added target "uninstall". 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-21 20:20:29 +00:00
Oliver Rauch a6bd3d8318 2001-05-20 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 
* removed a bug in saned (patch by Matthias Trute <mtrute@topmail.de>)
          calculation of the reader buffer index was not correct:
             if (reader >= sizeof (buf))
          -    reader = 0;
          +    reader -= sizeof(buf);
 2001-05-20 21:00:43 +00:00
Karl Heinz Kremer 664e39a04c Karl Heinz Kremer <khk@khk.net> 
backend/epson.c: fixed dates in change log entries and finally fixed the
TPU bug with older scanners
 2001-05-19 15:13:12 +00:00
Oliver Rauch 757e0e98fe removed bug in umax backend sane_exit 
Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE>
 2001-05-17 21:47:31 +00:00
Henning Geinitz 51b40fd119 Used a more suitable comment. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-17 21:43:26 +00:00
Henning Geinitz cbc0764a30 Reformated. Added point about headers and libraries that are not 
available on every system and inclusion of backends into CVS.
Some minor fixes and clarifications
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-17 21:41:39 +00:00
Henning Geinitz ae0f2050c2 Updated concerning sane man page and new backends. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-17 21:29:33 +00:00
Oliver Rauch 1c958ce822 * updated umax backend to version 1.0 build 26 
Oliver Rauch <Oliver.Rauch@rauch-domain.de>
 2001-05-17 21:17:33 +00:00
Peter Fales 7b271145b5 dc240.c, dc25.c add version string 2001-05-17 03:17:21 +00:00
Henning Geinitz 1fd3ab0b38 Added sane-sm3600.5. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-16 19:14:28 +00:00
Henning Geinitz 789c68cb40 Updates concerning memory leaks and access violations. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-16 19:10:50 +00:00
Henning Geinitz 36417e7662 Detect presence of libusb and enable sm3600 backend. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-16 19:04:09 +00:00
Henning Geinitz d500255cdb Added sm3600 backend 
(from Marian Eichholz <eichholz@computer.org>).
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-16 18:59:50 +00:00
Chris Pinkham 1851833249 2001-05-16 Chris Pinkham <cpinkham@infi.net> 
* backend/artec.c: changed #include to use "../include/sane/config.h"
         instead of "sane/config.h".
 2001-05-16 17:29:38 +00:00
Stéphane Voltz 1677e2e00a * added entry for umax_pp.c and umax_pp_low.c changes 2001-05-16 04:58:01 +00:00
Henning Geinitz e1258a9bc9 scanimage_exit: use the handle (not its address) for sane_close. 
Fixed yet another warning.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-14 20:56:28 +00:00
Gerhard Jaeger 7769c43d89 plustek.c: Free memory malloced in sane_get_devices() in sane_exit() 2001-05-14 14:24:01 +00:00
Petter Reinholdtsen bf14427fa4 Updated with current version and contact information. 2001-05-14 08:39:32 +00:00
Petter Reinholdtsen 2a295c45ac Remove some compiler warnings. 2001-05-14 07:18:21 +00:00
Peter Fales b94ed2ae5c Remove DBG(0,...) line that was getting printed 
for non-dc25 users.
 2001-05-14 03:27:35 +00:00
Karl Heinz Kremer 65a5a602f1 Karl Heinz Kremer <khk@khk.net>: 
backend/epson.c:
 - Removed check for '\n' before end of line
 - Free memory malloced in sane_get_devices() in sane_exit() again
 - Check first if the scanner does support the set film type and set
   focus position before the GUI elements are displayed.
 - This caused problems with older (B4 level) scanners when a TPU
   was connected.
 2001-05-13 21:18:43 +00:00
Henning Geinitz 56c06f5291 Added path to sane.ps. Added comments about how somebody can 
help the SANE project. Added comments about possible problems
with old installaitions of SANE and /etc/ld.so.conf. Added section
"REPORTING BUGS".
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 20:32:27 +00:00
Henning Geinitz b94e10284c Added mustek600iin-off. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 19:45:48 +00:00
Henning Geinitz 767c3b179c Used #include "../include/sane/...". 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 18:44:05 +00:00
Henning Geinitz 94184c03fe Used #include "../include/sane/...". 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 18:42:23 +00:00
Henning Geinitz 6de6c99be0 Used #include "../include/sane/...". 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 16:25:04 +00:00
Henning Geinitz 86d54ecdb2 Fixed some memory leaks. A bit of reformating. Added more 
debug output. Used #include "../include/sane/...".
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 16:23:45 +00:00
Henning Geinitz 49e900e6c1 Fixed some memory leaks. Used #include "../include/sane/...". 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 16:16:56 +00:00
Henning Geinitz ce77a88cbf Added exit handler to call sane_close and sane_exit in any case 
and to free alloced memory. A bit of reformating. Used
#include "../include/sane/...". Fixed some warnings.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 16:08:41 +00:00
Henning Geinitz eae8f44a93 Fixed some memory leaks. Fixed some warnings. 
Some reformating. Used #include "../include/sane/...".
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 16:03:40 +00:00
Henning Geinitz cea34e78aa Use gmake if make doesn't work. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 15:58:58 +00:00
Henning Geinitz 531862fcac Added point about sane_init results != SANE_STATUS_GOOD. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 15:57:55 +00:00
Henning Geinitz b429a484db Added entries about memory leaks, sane_init return values, and 
HP-UX problems in isfdtype.c.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-13 15:56:29 +00:00
Jochen Eisinger f13bd6e000 2001-05-11 Jochen Eisinger <jochen.eisinger@gmx.de> 
* TODO, backend/mustek_pp.c: fixed line-end handling, removed entry
	  from TODO list
 2001-05-11 18:49:33 +00:00
Henning Geinitz 3fe04e3036 Removed pie from lists of bugs. Removed sane manual page. 
Added some context to the Tru64 problems.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-11 16:29:48 +00:00
Henning Geinitz 4abcb6df12 Added sane.7. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-09 18:18:26 +00:00
Henning Geinitz 12f54e95c0 Removed content that's now in the sane maual page. Added 
reference to man sane.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-09 18:13:40 +00:00
Henning Geinitz c7f2c14f02 Added SANE manual page. 
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-09 18:08:14 +00:00
Henning Geinitz 7602924d68 Clarified the paragraph concerning sane_read. If *len != 0 the status 
must be SANE_STATUS_GOOD.
Henning Meier-Geinitz <henning@meier-geinitz.de>
 2001-05-09 17:58:03 +00:00
Simon Munton ca69f7fc48 Updates to pie.c to free devlist in sane_exit and to not try and remove 
newlines after calling sanei_config_read()
 2001-05-08 12:08:37 +00:00
Peter Fales 08ddff6f0e dc25.[ch] 2001-05-08 03:32:17 +00:00
Oliver Rauch f8e10c81f1 2001-05-07 Oliver Rauch <Oliver.Rauch@rauch-domain.de> 
* applied a patch by Douglas Gilbert to sanei_scsi.c
          it solves the Problem that the scanner is not
          found on linux systems when the order of the
          scsi devices is not coverd by the order of
          devices listed by /proc/scsi/scsi, it prefers
          new kernel 2.4 methods when available
 2001-05-07 16:05:20 +00:00
Henning Geinitz 6d7a7c7f0d Added some (most) backends to list of sane_get_devices leak. 2001-05-06 19:17:10 +00:00
Henning Geinitz bddb9db2e1 Free devlist in sane_exit. 2001-05-06 19:12:49 +00:00