backend/pixma_imageclass.c: added PIXMA_CAP_ADF to model imageclass MF4320, to support MF4330d
backend/pixma_mp150.c: removed untested state for MP560 (comment)
doc/descriptions/pixma.desc, doc/sane-pixma.man: doc update for both MP560 and MF4330d
- backend/pixma_mp150.c: some error condition fixes to Generation 4 (MP640, ...) XML code
- backend/pixma_imageclass.c: added support for ImageClass MF4360dn-MF4390dn
- include/pixma.h: bumped backend version to 0.16.1
- doc/descriptions/pixma.desc, doc/sane-pixma.man: doc updates
- MF3110: fix interrupt messages handling.
- MF4660: added support for this ImageClass device.
- MP980: Following a report, tuned the color planes shifting values.
- All: Documentation updates.
- split sane_get_parameters into two functions
- remove unused code from get_pixelsize
- support hardware based auto length detection
- various status and comment updates
- backend/pixma_mp150.c:
Thanks to Vladimir Andreev patch, fix network scan for MP800R.
- doc/descriptions/pixma.desc and doc/sane-pixma.man:
. Documentation updates for latest MF5770 changes.
. Note: MF5770 grayscale mode appears to require some more work.
The backend description comes from the epkowa.desc file
with appropriate changes to suit epson2.desc. The usb
device list is now generated from this file, skipping
the :unsupported models. This means epson2 now detects
32 more models.
- use average instead of min/max for fine offset and gain
- rewrite supported resolution list as x and y arrays
- merge x and y resolution options into single option
- move scan params into two new structs, s->u and s->s
- sane_get_parameters() just returns values from s->u
- dont call wait_scanner() in object_position()
- dont call ssm_*() from option handler
- refactor sane_start()
- read_from_buffer() can workaround missing res, modes and cropping
- set most DR-2xxx machines to use the read_from_buffer workarounds
- set default threshold to 90
- add option for button #3 of some machines
- don't eject paper during init
- add DR-2010 quirks
- switch counter to HARD_SELECT, not SOFT
- Updated backend version
- Added HP ScanJet 4500C as completely supported
- Added HP ScanJet 5500C as untested
- HP ScanJet 4570C/5550C/5590/7650 marked as completely supported
* configure, configure.in: version 1.0.21cvs
* doc/releases.txt: minor updates for new build system
* doc/descriptions/canon_dr.desc, doc/descriptions/coolscan3.desc,
doc/descriptions/rts8891.desc, doc/descriptions/xerox_mfp.desc:
remove :new tag
doc/descriptions/fujitsu.desc: add S1500 usb ids and status
* backend/canon_dr.c: update credits
* doc/sane-fujitsu.man doc/sane-canon_dr.man: update version numbers,
dates, credits and known issues
* doc/saned.man: remove section about uncontrolled data port range
- return cmd status for reads of sensor options
* backend/canon_dr.c, doc/descriptions/canon_dr.desc: backend v26
- return cmd status for reads of sensor options
- allow rs to adjust read length for all bad status responses
- fix DR-2510C duplex deinterlacing code
- rewrite sane_read helpers to read until EOF
- update sane_start for scanners that dont use object_position
- dont call sanei_usb_clear_halt() if device is not open
- increase default buffer size to 4 megs
- set buffermode on by default
- hide modes and resolutions that DR-2510C lies about
- read_panel() logs front-end access to sensors instead of timing
- rewrite do_usb_cmd() to use remainder from RS info
* doc/desciptions/canon_dr.desc: backend v24, update DR-2510C comment
- rewrite all image data processing code
- handle more image interlacing formats
- re-enable binary mode on some scanners
- limit some machines to full-width scanning
* doc/desciptions/canon_dr.desc: v23, improved comments
- pad gray deinterlacing area for DR-2510C
- override tl_x and br_x for fixed width scanners
* doc/descriptions/canon_dr.desc: backend v19, update comments
- add byte-oriented duplex interlace code
- add RRGGBB color interlace code
- add basic support for DR-2580C, DR-2050C, DR-2080C, DR-2510C
- add more unknown setwindow bits
- add support for 16 byte status packets
- clean do_usb_cmd error handling (call reset more often)
- set status packet size from config file
- rewrite config file parsing to reset options after each scanner
- add config options for vendor, model, version
- dont call inquiry if those 3 options are set
- remove default config file from code
- add initial gray deinterlacing code for DR-2510C
- rename do_usb_reset to do_usb_clear
* doc/descriptions/canon_dr.desc: backend v18, update model status
* backend/canon_dr.conf.in: added better comments and new options
Nicolas Martin