kopia lustrzana https://github.com/projecthorus/radiosonde_auto_rx
22 wiersze
1.5 KiB
Markdown
22 wiersze
1.5 KiB
Markdown
### Automatic Radiosonde RX Station Extensions ###
|
|
This fork of [rs1279's RS](https://github.com/rs1729/RS) codebase provides a set of utilities ('auto_rx') to allow automatic reception and uploading of [Radiosonde](https://en.wikipedia.org/wiki/Radiosonde) positions to multiple services, including:
|
|
* The [Habitat High-Altitude Balloon Tracker](https://tracker.habhub.org)
|
|
* APRS-IS (for display on sites such as [aprs.fi](https://aprs.fi)
|
|
* [OziPlotter](https://github.com/projecthorus/oziplotter), for mobile radiosonde chasing.
|
|
|
|
Currently we support the following radiosonde types:
|
|
* Vaisala RS92SGP
|
|
* Vaisala RS41SGP
|
|
|
|
Support for other radiosondes may be added as required (send us sondes to test with!)
|
|
|
|
This software performs the following steps:
|
|
1. Use rtl_power to scan across a user-defined frequency range, and detect peaks in the spectrum.
|
|
2. For each detected peak frequency, run the rs_detect utility, which determines if a radiosonde signal is present, and what type it is.
|
|
3. If a radiosonde signal is found, start demodulating it, and upload data to various internet services.
|
|
4. If no peaks are found, or if no packets are heard from the radiosonde in a given amount of time (2 minutes by default), go back to step 1.
|
|
|
|
By running auto_rx continuously, not just at known radiosonde launch times, you may see other radiosonde launches (military or otherwise) that would otherwise go un-noticed.
|
|
|
|
Refer to the wiki for [installation and setup instructions](https://github.com/projecthorus/radiosonde_auto_rx/wiki).
|