Update BME68X and BME690 examples

micropython/examples/breakout_bme68x/README.md

@@ -11,23 +11,25 @@
 
 ## Getting Started
 
-Construct new `PimoroniI2C` and `BreakoutBME68X` instances:
+Construct new `I2C` and `BreakoutBME68X` instances:
 
 ```python
 from breakout_bme68x import BreakoutBME68X
-from pimoroni_i2c import PimoroniI2C
 
-PINS_BREAKOUT_GARDEN = {"sda": 4, "scl": 5}
-PINS_PICO_EXPLORER = {"sda": 20, "scl": 21}
-
-i2c = PimoroniI2C(**PINS_PICO_EXPLORER)
+i2c = machine.I2C()
 bme = BreakoutBME68X(i2c)
 ```
 
-The `breakout_bme68x` module includes constants for the possible I2C addresses:
+The default I2C address is `0x76`. If you've cut the trace to change the I2C address of the sensor, you can specify the alternate I2C address like this:
 
-* `ADDRESS_DEFAULT`
-* `ADDRESS_ALT`
+``` python
+bme = BreakoutBME68X(i2c, 0x77)
+```
+
+The `breakout_bme68x` module also includes constants for the possible I2C addresses:
+
+* `I2C_ADDRESS_DEFAULT`
+* `I2C_ADDRESS_ALT`
 
 ## Reading Data From The Sensor
 

micropython/examples/breakout_bme68x/bme68x_demo.py

@@ -2,18 +2,14 @@
 
 This demo will work for both the BME680 and BME688.
 """
+
+import machine
 import time
 from breakout_bme68x import BreakoutBME68X, STATUS_HEATER_STABLE
-from pimoroni_i2c import PimoroniI2C
 
-PINS_BREAKOUT_GARDEN = {"sda": 4, "scl": 5}
-PINS_PICO_EXPLORER = {"sda": 20, "scl": 21}
-
-i2c = PimoroniI2C(**PINS_BREAKOUT_GARDEN)
-
-bme = BreakoutBME68X(i2c)
+bme = BreakoutBME68X(machine.I2C(), 0x76)
 # If this gives an error, try the alternative address
-# bme = BreakoutBME68X(i2c, 0x77)
+# bme = BreakoutBME68X(machine.I2C(), 0x77)
 
 while True:
     temperature, pressure, humidity, gas, status, _, _ = bme.read()

micropython/examples/breakout_bme690/README.md

@@ -0,0 +1,101 @@
+# BME69X <!-- omit in toc -->
+
+- [Getting Started](#getting-started)
+- [Reading Data From The Sensor](#reading-data-from-the-sensor)
+- [Configuring The Sensor](#configuring-the-sensor)
+  - [Filter Settings](#filter-settings)
+  - [Oversampling Settings](#oversampling-settings)
+  - [Mode Settings](#mode-settings)
+  - [Standby/Output Data Rate Settings](#standbyoutput-data-rate-settings)
+  - [Defaults](#defaults)
+
+## Getting Started
+
+Construct new `I2C` and `BreakoutBME69X` instances:
+
+```python
+from breakout_bme69x import BreakoutBME69X
+
+i2c = machine.I2C()
+bme = BreakoutBME69X(i2c)
+```
+
+The default I2C address is `0x76`. If you've cut the trace to change the I2C address of the sensor, you can specify the alternate I2C address like this:
+
+``` python
+bme = BreakoutBME69X(i2c, 0x77)
+```
+
+The `breakout_bme69x` module also includes constants for the possible I2C addresses:
+
+* `I2C_ADDRESS_DEFAULT`
+* `I2C_ADDRESS_ALT`
+
+## Reading Data From The Sensor
+
+The `read` method will return a tuple containing Temperature (degrees C), Pressure (Pa), relative humidity (%rH), and gas resistance (Ω) values, plus the status code and gas/measurement indexes:
+
+```python
+temperature, pressure, humidity, gas_resistance, status, gas_index, meas_index = bme.read()
+```
+
+In all cases `gas_index` and `meas_index` will be zero, since these refer to the measurement profile used to gather the current readings. The MicroPython bindings currently only support a single measurement profile with a default of 300c for 100ms.
+
+You can pass a custom temperature and duration into `read`:
+
+```python
+temperature, pressure, humidity, gas_resistance, status, gas_index, meas_index = bme.read(heater_temp=250, heater_duration=50)
+```
+
+## Configuring The Sensor
+
+The `configure` method allows you to set up the oversampling, filtering and operation mode.
+
+```python
+bme.configure(filter, standby_time, os_pressure, os_temp, os_humidity)
+```
+
+The `breakout_bme69x` module includes constants for these:
+
+### Filter Settings
+
+* `FILTER_COEFF_OFF`
+* `FILTER_COEFF_1`
+* `FILTER_COEFF_3`
+* `FILTER_COEFF_8`
+* `FILTER_COEFF_15`
+* `FILTER_COEFF_31`
+* `FILTER_COEFF_63`
+* `FILTER_COEFF_127`
+
+### Oversampling Settings
+
+* `NO_OVERSAMPLING`
+* `OVERSAMPLING_1X`
+* `OVERSAMPLING_2X`
+* `OVERSAMPLING_4X`
+* `OVERSAMPLING_8X`
+* `OVERSAMPLING_16X`
+
+### Mode Settings
+
+* `SLEEP_MODE`
+* `FORCED_MODE`
+* `NORMAL_MODE`
+
+### Standby/Output Data Rate Settings
+
+* `STANDBY_TIME_0_59_MS`
+* `STANDBY_TIME_62_5_MS`
+* `STANDBY_TIME_125_MS`
+* `STANDBY_TIME_250_MS`
+* `STANDBY_TIME_500_MS`
+* `STANDBY_TIME_1000_MS`
+* `STANDBY_TIME_10_MS`
+* `STANDBY_TIME_20_MS`
+
+### Defaults
+
+```python
+bme.configure(FILTER_COEFF_3, STANDBY_TIME_1000_MS, OVERSAMPLING_16X, OVERSAMPLING_2X, OVERSAMPLING_1X)
+```

micropython/examples/breakout_bme690/demo_bme690.py

@@ -0,0 +1,19 @@
+"""BME69X demo
+
+Demo of how to read the BME690 sensor.
+"""
+
+import machine
+import time
+from breakout_bme69x import BreakoutBME69X, STATUS_HEATER_STABLE
+
+bme = BreakoutBME69X(machine.I2C(), 0x76)
+# If this gives an error, try the alternative address
+# bme = BreakoutBME69X(machine.I2C(), 0x77)
+
+while True:
+    temperature, pressure, humidity, gas, status, _, _ = bme.read()
+    heater = "Stable" if status & STATUS_HEATER_STABLE else "Unstable"
+    print("{:0.2f}c, {:0.2f}Pa, {:0.2f}%, {:0.2f} Ohms, Heater: {}".format(
+        temperature, pressure, humidity, gas, heater))
+    time.sleep(1.0)