pimoroni-pico/micropython/modules_py/inventor.py

152 wiersze
3.7 KiB
Python
Czysty Zwykły widok Historia

import gc
from machine import Pin, PWM
from pimoroni_i2c import PimoroniI2C
from plasma import WS2812
from motor import Motor
from servo import Servo
from encoder import Encoder, MMME_CPR
# IO Pin Constants
GP0 = 0
GP1 = 1
GP2 = 2
A0 = 26
A1 = 27
A2 = 28
GPIOS = (GP0, GP1, GP2, A0, A1, A2)
ADCS = (A0, A1, A2)
# Index Constants
MOTOR_A = 0
MOTOR_B = 1
SERVO_1 = 0
SERVO_2 = 1
SERVO_3 = 2
SERVO_4 = 3
SERVO_5 = 4
SERVO_6 = 5
LED_GP0 = 0
LED_GP1 = 1
LED_GP2 = 2
LED_A0 = 3
LED_A1 = 4
LED_A2 = 5
LED_SERVO_1 = 6
LED_SERVO_2 = 7
LED_SERVO_3 = 8
LED_SERVO_4 = 9
LED_SERVO_5 = 10
LED_SERVO_6 = 11
# Count Constants
NUM_GPIOS = 6
NUM_ADCS = 3
NUM_MOTORS = 2
NUM_SERVOS = 6
NUM_LEDS = 12
class Inventor2040W():
AMP_EN_PIN = 3
I2C_SDA_PIN = 4
I2C_SCL_PIN = 5
MOTOR_A_PINS = (6, 7)
MOTOR_B_PINS = (8, 9)
ENCODER_A_PINS = (19, 18)
ENCODER_B_PINS = (17, 16)
SERVO_1_PIN = 10
SERVO_2_PIN = 11
SERVO_3_PIN = 12
SERVO_4_PIN = 13
SERVO_5_PIN = 14
SERVO_6_PIN = 15
LED_DATA_PIN = 20
PWM_AUDIO_PIN = 21
USER_SW_PIN = 22
AMP_CORRECTION = 4
DEFAULT_VOLUME = 0.2
def __init__(self, motor_gear_ratio=50, init_motors=True, init_servos=True):
# Free up hardware resources
gc.collect()
# Set up the motors and encoders, if the user wants them
self.motors = None
if init_motors:
cpr = MMME_CPR * motor_gear_ratio
self.motors = [Motor(self.MOTOR_A_PINS), Motor(self.MOTOR_B_PINS)]
# Set the encoders to use PIO 0 and State Machines 0 and 1
self.encoders = [Encoder(0, 0, self.ENCODER_A_PINS, counts_per_rev=cpr, count_microsteps=True),
Encoder(0, 1, self.ENCODER_B_PINS, counts_per_rev=cpr, count_microsteps=True)]
# Set up the servos, if the user wants them
self.servos = None
if init_servos:
self.servos = [Servo(i) for i in range(self.SERVO_1_PIN, self.SERVO_6_PIN + 1)]
# Set up the i2c for Qw/st and Breakout Garden
self.i2c = PimoroniI2C(self.I2C_SDA_PIN, self.I2C_SCL_PIN, 100000)
# Set up the amp enable
self.__amp_en = Pin(self.AMP_EN_PIN, Pin.OUT)
self.__amp_en.off()
self.audio_pwm = PWM(Pin(self.PWM_AUDIO_PIN))
self.__volume = self.DEFAULT_VOLUME
# Set up the user switch
self.__switch = Pin(self.USER_SW_PIN, Pin.IN, Pin.PULL_DOWN)
# Set up the WS2812 LEDs, using PIO 0 and State Machine 2
self.leds = WS2812(NUM_LEDS, 0, 2, self.LED_DATA_PIN)
self.leds.start()
def switch_pressed(self):
return self.__switch.value()
def play_tone(self, frequency):
try:
self.audio_pwm.freq(frequency)
except ValueError:
self.play_silence()
raise ValueError("frequency of range. Expected greater than 0")
corrected_volume = (self.__volume ** 4) # Correct for RC Filter curve
self.audio_pwm.duty_u16(int(32768 * corrected_volume))
self.unmute_audio()
def play_silence(self):
self.audio_pwm.freq(44100)
corrected_volume = (self.__volume ** 4) # Correct for RC Filter curve
self.audio_pwm.duty_u16(int(32768 * corrected_volume))
self.unmute_audio()
def stop_playing(self):
self.audio_pwm.duty_u16(0)
self.mute_audio()
def volume(self, volume=None):
if volume is None:
return self.__volume
if volume < 0.01 or volume > 1.0:
raise ValueError("volume out of range. Expected 0.0 to 1.0")
self.__volume = volume
def mute_audio(self):
self.__amp_en.off()
def unmute_audio(self):
self.__amp_en.on()