pecanpico10/tracker/software/source/config/config.c

/**
 * Put your configuration settings here. See description of all fields in types.h
 */


#include "config.h"
#include "aprs.h"
#include "geofence.h"

conf_t conf_sram;

const conf_t conf_flash_default = {
    // Primary position app
    .pos_pri = {
        .beacon = {
            .active = false,
            .cycle = TIME_S2I(60 * 5),
            .init_delay = TIME_S2I(60),
            .fixed = false // Add lat, lon alt fields if enabling fixed
        },
        .radio_conf = {
            .pwr = 0x7F,
            .freq = FREQ_APRS_DYNAMIC,
            .mod = MOD_AFSK,
            .cca = 0x4F,
        },
        // App identity
        .call = "VK2GJ-12",
        .path = "WIDE1-1",
        .symbol = SYM_ANTENNA,
        .aprs_msg = true, // Enable APRS message reception on this call sign
    },

    // Secondary position app
    .pos_sec = {
        .beacon = {
            .active = false,
            .cycle = TIME_S2I(180),
            .init_delay = TIME_S2I(60),
            .fixed = false // Add lat, lon alt fields if enabling fixed
        },
        .radio_conf = {
            .pwr = 0x7F,
            .freq = 145825000,
            .mod = MOD_AFSK,
            .cca = 0xFF
        },
        // App identity
        .call = "VK2GJ-15",
        .path = "",
        .symbol = SYM_BALLOON,
        .aprs_msg = true, // Enable APRS message reception on this call sign
    },

    // Primary image app
    .img_pri = {
        .svc_conf = {
            .active = true,
            .cycle = TIME_S2I(60 * 5),
            .init_delay = TIME_S2I(90),
            .send_spacing = TIME_S2I(5)
        },
        .radio_conf = {
            .pwr = 0x7F,
            .freq = 144800000,
            .mod = MOD_2FSK,
            .cca = 0x4F

        },
        // App identity
        .call = "VK2GJ-15",
        .path = "",

        // Image settings
        .res = RES_VGA,
        .quality = 4,
        .buf_size = 40 * 1024,
        .redundantTx = false
    },

    // Secondary image app
    .img_sec = {
        .svc_conf = {
            .active = true,
            .cycle = TIME_S2I(60 * 15),
            .init_delay = TIME_S2I(60 * 1),
            .send_spacing = TIME_S2I(30)
        },
        .radio_conf = {
            .pwr = 0x7F,
            .freq = APRS_FREQ_AUSTRALIA,
            .mod = MOD_AFSK,
            .cca = 0x4F
        },
        // App identity
        .call = "VK2GJ-12",
        .path = "",

        // Image settings
        .res = RES_QVGA,
        .quality = 4,
        .buf_size = 15 * 1024,
        .redundantTx = false
    },

    // Log app
    .log = {
        .svc_conf = {
            .active = false,
            .cycle = TIME_S2I(10),
            .init_delay = TIME_S2I(5)
        },
        .radio_conf = {
            .pwr = 0x7F,
            .freq = FREQ_APRS_DYNAMIC,
            .mod = MOD_AFSK,
            .cca = 0x4F
        },
        // Node identity
        .call = "VK2GJ-13",
        .path = "WIDE1-1",
        .density = 10
    },

    // APRS app
    .aprs = {
        // The receive identity for APRS
        .rx = {
             .svc_conf = {
                 // The packet receive service is enabled if true
                 // Receive is paused and resumed by transmission
                 .active = true,
                 .init_delay = TIME_S2I(20)
             },
            // Receive radio configuration
            .radio_conf = {
                .freq = FREQ_APRS_DYNAMIC,
                .mod = MOD_AFSK,
                .rssi = 0x3F
            },
            // APRS identity used in message responses if digipeat is not enabled
            .call = "VK2GJ-4",
            .symbol = SYM_ANTENNA
        },
        .aprs_msg = false, // Set true to enable messages to be accepted on RX call sign
        .digi = true,
        .tx = {
           // Transmit radio configuration
           .radio_conf = {
               .freq = FREQ_APRS_RECEIVE,
               .pwr = 0x7F,
               .mod = MOD_AFSK,
               .cca = 0x4F
           },
           // Digipeat transmission identity
           .call = "VK2GJ-5",
           .path = "WIDE2-1",
           .symbol = SYM_DIGIPEATER,
           .beacon = {
             // The telemetry beacon service is enabled if true when RX and DIGI are enabled
             // Receive is resumed after any transmission
             .active = true,
             .init_delay = TIME_S2I(20),
             .cycle = TIME_S2I(60 * 30), // Beacon interval
             .fixed = true, // Use fixed position data if true
             .lat = -337331175, // Degrees (expressed in 1e-7 form)
             .lon = 1511143478, // Degrees (expressed in 1e-7 form)
             .alt = 144 // Altitude in metres
            },
       },
    },

    // Global controls

    // Power control
    .keep_cam_switched_on = false,
    .gps_on_vbat = 3600, // mV
    .gps_off_vbat = 3400, // mV
    .gps_onper_vbat = 4000, // mV

    // GPS altitude model control (air pressure controlled using on-board BME280)
    .gps_pressure = 90000, // Air pressure (Pa) threshold for alt model switch
    .gps_low_alt = GPS_STATIONARY,
    .gps_high_alt = GPS_AIRBORNE_1G,

    // APRS
    // How often to send telemetry config
    .tel_enc_cycle = TIME_S2I(60 * 60 * 2),

    // The default APRS frequency when geofence is not resolved
    .freq = APRS_FREQ_AUSTRALIA,

    // The base station identity.
    .base = {
        // If enabled tracker initiated APRS messages are addressed to this call sign
       .enabled = true,
       .call = "VK2GJ-7",
       .path = "WIDE2-1",
    },

    .magic = CONFIG_MAGIC_DEFAULT // Do not remove. This is the activation bit.
};