This PR addresses that by:
* rendering oneway arrows on more than `subclass=cycleway`
* less opacity for path/footway casing
* adding the thin black casing to bridges
* adding `subclass=steps` & `subclass=bridleway` rendering
* render `bicycle=designated` as `subclass=cycleway` and `horse=designated` as `subclass=bridleway` (bike taking priority)
* improved tunnel rendering with double casing & adding main line
* made casing min zoom consistent across subclasses
All of these changes were made to mimic OSM Carto.
This PR proposes to add a new class, "pond" to the water layer, which allows for a style to de-emphasize minor bodies of water (tagged `water=pond,basin,wastewater`) when compared to more significant objects tagged reservoir/lake. This PR retains the default behavior of classifying a water body as a "lake" if more specific tagging is not added.
This PR defines the set of routes in Canada which are equivalent in national importance to the US Interstate Highway System, and are therefore appropriate to render at zoom 4. This creates a sane, connected highway network at this zoom level across the USA and Canada.
This adds two additional network types for Canadian highways, ca-provincial for provincial-level roads, and ca-provincial-arterial for "highest importance" roads that are not part of the Trans-Canada highway but should be regarded as equivalent for low-zoom rendering purposes.
Additionally, this extracts out the country-specific network checks to a separate function in order to define "equivalent top-level networks" by country, providing a place to add additional national definitions as they're added by contributors.
This PR improves the behavior introduced in #1440, which inadvertently included all motorways at z4, which was unintended. Instead, this PR provides an appropriate progression from z4 to z5 with the highest national-importance highways being rendered at z4 (including where they degrade to trunk, as in Canada), and all motorways being added to the mix at z5.
This PR adds `build-style` and `download-fonts` targets to `start-tileserver` target.
Calling `build-style` and `download-fonts` ensures that there is the OSM OpenMapTiles style build and ready and fonts downloaded.
This adds support to show the Trans-Canada Highway at zoom 4. Despite being the most important highway network in Canada, portions are `highway=trunk` due to the remoteness of the countryside. However, it's still important to show a connected highway network at the lowest zoom without showing all trunk roads at this zoom.
This change also adds support for US Interstate Highways to be drawn at z4 when they're tagged as trunks. There's only a few examples of this, but it removes those (tiny) gaps from the generalized road geometries. As we identify additional countries which should have their most important road network rendered at the lowest road zoom even if they're trunk, we can add them to the list of networks that get this treatment.
* OpenMapTiles style
* Rename style snippets from layer_name.json to defaultstyle.json
* Add README to icons dir.
* Add README to icons dir.
* Rename snippets to style.json
* Fix spritezero - move icons to svg subdir
* Move icons from style/icons/svg directly to style/icons
Co-authored-by: Tomas Pohanka <TomPohys@gmail.com>
This PR creates larger polygons of `residential` land-use areas for upper zoom levels (especially for zoom 6 - 10).
Clusters are created with the same logic as for [`building on z13`](b14da2eafb/layers/building/update_building.sql (L34-L49)).
The generalization of land-use prolongs the `import-sql` step of the `landuse` layer. But it is still faster than the `building z13` generalization which with the parallel importing keeps the whole `import-sql` time untouched.
This PR updating Natural Earth dataset from v4.1 to 5.1.2. It is in cooperation with https://github.com/openmaptiles/openmaptiles-tools/pull/414, where is `import-data` docker image updated.
PR removes manual fixes for lake merging (already fixed in version 5.1.2)
Switched comparison from `gn_ascii` (removed from NE5) to `name_en`.
Could be merged after https://github.com/openmaptiles/openmaptiles-tools/pull/413. After OMT-T is merged, it will use `latest` image (until the release of OMT-T v7)
Guided busways (or bus guideways in OSM terminology) are special roadways along which bus operators can travel smoothly at high speeds without steering. These are tagged highway=bus_guideway on OpenStreetMap.
Currently, highway=busway is surfaced in OpenMapTiles as the busway class in the transportation layer, but highway=bus_guideway is not present. These two types of roadways serve generally similar purposes, so it would make sense to have guided busways at the same zoom levels.
This PR adds support for `capital=6` in the place layer, which is used for tagging county seats in the US. A county seat is the capital of a county. In addition, I reorganized the code a bit to be simpler.
As noted in ZeLonewolf/openstreetmap-americana#384, we would like to render county seats along with state and national capitals, as this is typical styling on American-style maps.
Update with also with `capital=3` and `capital=5`
closes#1370
This PR adds a parcel locker to post class.
Similarly to ATMs from PR #1375 if a name is not present we try to use `brand` or `operator`. Here we also try to add `ref` to the brand or operator since it can disambiguate parcel lockers that are next to each other (which happens).
This PR adding OSM ID to the lakes
OSM lakes are used from zoom 6
From zoom 0 to zoom 5 are used Natural Earth lakes.
- There is a new joining mat. view (`match_osm_ne_id`) contains which Natural Earth ID should convert to OSM ID. This logic is used to keep a consistent ID between switching between NE (zooms 0 - 5) and OSM (zooms 6 - 12). For smaller areas (not the whole planet), where are not available OSM lakes, the NE lakes keep their NE ID.
- There are also switch the final views to the mat. views - this should slightly increase performance (get rid of multipolygons).
- FIX typo for zooms 0 - 3 (`lakes` instead of `lake`).
Fixes#1374
This PR fixes `update_osm_route_member()` function. Before this the column `network_type` became empty after daily-update.
This PR adds `network_type` into upsert together with `rank` and `concurrency_index` columns.
This bug had occurred once already and had been fixed in https://github.com/openmaptiles/openmaptiles/pull/1239 but then some columns were added and these new columns were not added into the upsert.
Replace the `REFRESH MATERIALIZED` on `osm_important_waterway_linestring*` by differential update.
The way of doing this is the same as other differential updates.
Replace the `REFRESH MATERIALIZED` on `osm_transportation_merge_linestring_gen_z*` by differential update.
The way of doing this is the same as other differential updates. But in this case there two `GROUP BY` level. So all the the process have to be done twice.
Since PR #922 the contents of `.env` are included in `Makefile` in order for `make` to by aligned with the `docker-compose` settings.
```
# Make all .env variables available for make targets
include .env
```
The down-side of employing the `include` mechanism is that the settings in `.env` now take higher precedence than the shell environment variables. As a result, controlling the OpenMapTiles flow because more difficult. For example, tests for `DIFF_MODE=true` had to modify the contents of `.env` in order to work:
b0e7f7884c/.github/workflows/integrity.yml (L45-L47) and
b0e7f7884c/Makefile (L629-L630)
Users were also faced with similar difficulties.
This PR restores the ability to control `make` and `quickstart.sh` using environment variable while keeping the use of the `.env` at a lower priority.
The result is restoring the ability to easily adjust the OpenMapTiles flow using environment variables, such as:
```
PGPORT=54321 DIFF_MODE=true ./quickstart.sh monaco
```
#### Notes:
1. This PR depends on #1363
2. This PR includes some clean-up of `Makefile`
This PR removes an unnecessary check in water.yml.
generated SQL before:
```
SELECT CASE
WHEN waterway='riverbank' THEN 'river'
WHEN "waterway" = 'dock' THEN 'dock'
WHEN "water" = 'river'
OR "waterway" = 'riverbank'
THEN 'river'
WHEN "waterway" = '' THEN 'lake'
ELSE 'lake'
END;
```
generated SQL after:
```
SELECT CASE
WHEN waterway='riverbank' THEN 'river'
WHEN "waterway" = 'dock' THEN 'dock'
WHEN "water" = 'river'
OR "waterway" = 'riverbank'
THEN 'river'
ELSE 'lake'
END;
```
The `waterway=''` test is purely redundant because it returns the same value as the fall-through ELSE case: `lake`.
Make targets `start-tileserver`, `start-maputnik`, and `update-osm` initialize on-going processes rather than perform a one-time task. It is more appropriate to execute them using `docker-compose up -d`. With the current `docker-compose run` execution, the user needs to run `make` as a background process. This PR also allows the use of `docker-compose logs` rather than the need to handle `stdout` and `stderr` redirection and avoids the dependency of `stdin` handling for `docker-compose run`
Using `docker-compose` rather than `docker`
Use appropriate` start-*` and `stop-*` make target names
Resolves#1352
Before this, only `aerialway=cable_car` and `aerialway=gondola` were included in the tiles. That misses some widely-used tags, notably `aerialway=chair_lift`, `aerialway=drag_lift`, and `aerialway=platter`. The usage of all the tags added in this commit, by fraction of all aerialway way keys (according to TagInfo), is:
| Tag | Usage |
|------------------------|-------:|
| `aerialway=chair_lift` | 25.51% |
| `aerialway=drag_lift` | 12.93% |
| `aerialway=platter` | 11.35% |
| `aerialway=t-bar` | 7.93% |
| `aerialway=j-bar` | 0.63% |
| `aerialway=mixed_lift` | 0.24% |
Some of these tags were also added in PR #620 back in May 2019, but were removed again before it was merged.
Fixes#1342.
Updates on `transporation_name` layer take much more time than before.
In 3.13 there had been introduced highway concurrency into `transportation` and `transportation_name` so I expected the update process will take more time but not that much. Because of this it's impossible to use updates on larger areas because the process takes too long.
The issue is caused by `IS NOT DISTINCT FROM` operator over `tags` (hstore) columns. I replaced it with `=` operator in combination with `coalesce()` function which returns the same results but in shorter time.
When docker compose returns a version with v prefix,
the version check would incorrectly treat it as version component
of 000, leading to always failing the docker-compose version check
even if the version is recent enough.
This happens at least with docker-compose 2.2.1 where
docker-compose version --short
returns v2.2.1 with the leading v.
This PR fixes a bug that causes that `track` lines disappear at z13. This bug was introduced in https://github.com/openmaptiles/openmaptiles/pull/1190, which adds rendering of paths and tracks at z12 and z13.
Before this PR:
z12: lines with `route_rank = 1` are added (no matter what `highway`).
z13: lines with `route_rank BETWEEN 1 AND 2` and `highway = 'path'` are added.
-> tracks with `route_rank=1` are added at z12 but not at z13.
After this PR
z12: lines with `route_rank = 1` and `highway IN ('path', 'track')` are added.
z13: lines with `route_rank BETWEEN 1 AND 2` and `highway IN ('path', 'track')` are added .
-> only tracks and paths are added at z12 and z13 (which was IMHO the goal of https://github.com/openmaptiles/openmaptiles/pull/1190)
* Add only the most important paths and tracks (route_rank=1) to z12 and more important ones (route_rank between 1-2 or sac_scale or has name) to z13.
Remove `FILTER_MAPNIK_OUTPUT` variables from docker-compose which stop raising warnings during start-up dockers.
This functionality was removed in https://github.com/openmaptiles/openmaptiles-tools/pull/349.
The current version of the mapnik does not need `FILTER_MAPNIK_OUTPUT`.
PR move `get_basic_names(tags, geometry)` function from `transportation_name_tags` function and adding it after `transportation_name_tags` resolve street abbrevation.
PR runs through `test-sql` test without error. Adding to `osm_transportation_name_network` (table and for update) was done in consequence of `test-sql` errors ([update test 500](a747d98550/tests/test-post-update.sql (L53))). Originally `get_basic_names` was just in `osm_transportation_name_linestring` table.
FIX#1324
Remove `STRICT` statement from `transportation_name_tags` function.
Concurrently with remove `STRICT` from `get_basic_names` and `get_latin_name` in OMT-T
FIX#1319
* Add info about using MID_ZOOM to optimize tile generation
* Remove params for generation that are now automatically detected
Co-authored-by: Tomas Pohanka <TomPohys@gmail.com>
Daniel Schep
