kopia lustrzana https://github.com/peterhinch/micropython_eeprom
Merge pull request #22 from adeuring/master
Add support for I2C EEPROMs with page sizes other than 128 in eeprom_…pull/23/head
commit
b5e9bcb160
|
@ -132,6 +132,7 @@ Arguments:
|
|||
is `2**block_size` so is 512 bytes by default.
|
||||
5. `addr` override base address for first chip
|
||||
6. `max_chips_count` override max_chips_count
|
||||
7. `page_size=7` The binary logarithm of the page size of the EEPROMs, i.e., the page size in bytes is `2 ** page_size`. The page size may vary between chips from different manufacturers even for the same storage size. Note that specifying a too large value will most likely lead to data corruption in write operations. Look up the correct value for your setup in the chip's datasheet.
|
||||
|
||||
With `addr` and `max_chips_count` override, it's possible to make multiple
|
||||
configuration
|
||||
|
|
|
@ -132,8 +132,10 @@ def cptest(eep=None): # Assumes pre-existing filesystem of either type
|
|||
print("Fail mounting device. Have you formatted it?")
|
||||
return
|
||||
print("Mounted device.")
|
||||
cp("eep_i2c.py", "/eeprom/")
|
||||
cp("eeprom_i2c.py", "/eeprom/")
|
||||
cp(__file__, "/eeprom/")
|
||||
# We may have the source file or a precompiled binary (*.mpy)
|
||||
suffix = __file__[__file__.rfind('.'):]
|
||||
cp("eeprom_i2c" + suffix, "/eeprom/")
|
||||
print('Contents of "/eeprom": {}'.format(uos.listdir("/eeprom")))
|
||||
print(uos.statvfs("/eeprom"))
|
||||
|
||||
|
|
|
@ -19,7 +19,7 @@ T24C32 = const(4096) # 4KiB 32Kbits
|
|||
# Logical EEPROM device consists of 1-8 physical chips. Chips must all be the
|
||||
# same size, and must have contiguous addresses.
|
||||
class EEPROM(BlockDevice):
|
||||
def __init__(self, i2c, chip_size=T24C512, verbose=True, block_size=9, addr=_ADDR, max_chips_count=_MAX_CHIPS_COUNT):
|
||||
def __init__(self, i2c, chip_size=T24C512, verbose=True, block_size=9, addr=_ADDR, max_chips_count=_MAX_CHIPS_COUNT, page_size=7):
|
||||
self._i2c = i2c
|
||||
if chip_size not in (T24C32, T24C64, T24C128, T24C256, T24C512):
|
||||
print("Warning: possible unsupported chip. Size:", chip_size)
|
||||
|
@ -29,6 +29,8 @@ class EEPROM(BlockDevice):
|
|||
self._i2c_addr = 0 # I2C address of current chip
|
||||
self._buf1 = bytearray(1)
|
||||
self._addrbuf = bytearray(2) # Memory offset into current chip
|
||||
self._page_size = 2 ** page_size
|
||||
self._page_mask = ~(self._page_size - 1)
|
||||
|
||||
# Check for a valid hardware configuration
|
||||
def scan(self, verbose, chip_size, addr, max_chips_count):
|
||||
|
@ -67,7 +69,7 @@ class EEPROM(BlockDevice):
|
|||
self._addrbuf[0] = (la >> 8) & 0xFF
|
||||
self._addrbuf[1] = la & 0xFF
|
||||
self._i2c_addr = self._min_chip_address + ca
|
||||
pe = (addr & ~0x7F) + 0x80 # byte 0 of next page
|
||||
pe = (addr & self._page_mask) + self._page_size # byte 0 of next page
|
||||
return min(nbytes, pe - la)
|
||||
|
||||
# Read or write multiple bytes at an arbitrary address
|
||||
|
|
Ładowanie…
Reference in New Issue