kopia lustrzana https://github.com/micropython/micropython
15 wiersze
468 B
Markdown
15 wiersze
468 B
Markdown
Program your board using the esptool.py program, found [here](https://github.com/espressif/esptool).
|
|
|
|
If you are putting MicroPython on your board for the first time then you should
|
|
first erase the entire flash using:
|
|
|
|
```bash
|
|
esptool.py --chip esp32c3 --port /dev/ttyUSB0 erase_flash
|
|
```
|
|
|
|
From then on program the firmware starting at address 0x0:
|
|
|
|
```bash
|
|
esptool.py --chip esp32c3 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x0 esp32c3-20220117-v1.18.bin
|
|
```
|