kopia lustrzana https://github.com/micropython/micropython
101 wiersze
3.1 KiB
Markdown
101 wiersze
3.1 KiB
Markdown
# The RP2 port
|
|
|
|
This is a port of MicroPython to the Raspberry Pi RP2 series of microcontrollers.
|
|
Currently supported features are:
|
|
|
|
- REPL over USB VCP, and optionally over UART (on GP0/GP1).
|
|
- Filesystem on the internal flash, using littlefs2.
|
|
- Support for native code generation and inline assembler.
|
|
- `utime` module with sleep, time and ticks functions.
|
|
- `uos` module with VFS support.
|
|
- `machine` module with the following classes: `Pin`, `ADC`, `PWM`, `I2C`, `SPI`,
|
|
`SoftI2C`, `SoftSPI`, `Timer`, `UART`, `WDT`.
|
|
- `rp2` module with programmable IO (PIO) support.
|
|
|
|
See the `examples/rp2/` directory for some example code.
|
|
|
|
## Building
|
|
|
|
The MicroPython cross-compiler must be built first, which will be used to
|
|
pre-compile (freeze) built-in Python code. This cross-compiler is built and
|
|
run on the host machine using:
|
|
|
|
$ make -C mpy-cross
|
|
|
|
This command should be executed from the root directory of this repository.
|
|
All other commands below should be executed from the ports/rp2/ directory.
|
|
|
|
Building of the RP2 firmware is done entirely using CMake, although a simple
|
|
Makefile is also provided as a convenience. To build the firmware run (from
|
|
this directory):
|
|
|
|
$ make clean
|
|
$ make
|
|
|
|
You can also build the standard CMake way. The final firmware is found in
|
|
the top-level of the CMake build directory (`build` by default) and is
|
|
called `firmware.uf2`.
|
|
|
|
## Deploying firmware to the device
|
|
|
|
Firmware can be deployed to the device by putting it into bootloader mode
|
|
(hold down BOOTSEL while powering on or resetting) and then copying
|
|
`firmware.uf2` to the USB mass storage device that appears.
|
|
|
|
If MicroPython is already installed then the bootloader can be entered by
|
|
executing `import machine; machine.bootloader()` at the REPL.
|
|
|
|
## Sample code
|
|
|
|
The following samples can be easily run on the board by entering paste mode
|
|
with Ctrl-E at the REPL, then cut-and-pasting the sample code to the REPL, then
|
|
executing the code with Ctrl-D.
|
|
|
|
### Blinky
|
|
|
|
This blinks the on-board LED on the Pico board at 1.25Hz, using a Timer object
|
|
with a callback.
|
|
|
|
```python
|
|
from machine import Pin, Timer
|
|
led = Pin(25, Pin.OUT)
|
|
tim = Timer()
|
|
def tick(timer):
|
|
global led
|
|
led.toggle()
|
|
|
|
tim.init(freq=2.5, mode=Timer.PERIODIC, callback=tick)
|
|
```
|
|
|
|
### PIO blinky
|
|
|
|
This blinks the on-board LED on the Pico board at 1Hz, using a PIO peripheral and
|
|
PIO assembler to directly toggle the LED at the required rate.
|
|
|
|
```python
|
|
from machine import Pin
|
|
import rp2
|
|
|
|
@rp2.asm_pio(set_init=rp2.PIO.OUT_LOW)
|
|
def blink_1hz():
|
|
# Turn on the LED and delay, taking 1000 cycles.
|
|
set(pins, 1)
|
|
set(x, 31) [6]
|
|
label("delay_high")
|
|
nop() [29]
|
|
jmp(x_dec, "delay_high")
|
|
|
|
# Turn off the LED and delay, taking 1000 cycles.
|
|
set(pins, 0)
|
|
set(x, 31) [6]
|
|
label("delay_low")
|
|
nop() [29]
|
|
jmp(x_dec, "delay_low")
|
|
|
|
# Create StateMachine(0) with the blink_1hz program, outputting on Pin(25).
|
|
sm = rp2.StateMachine(0, blink_1hz, freq=2000, set_base=Pin(25))
|
|
sm.active(1)
|
|
```
|
|
|
|
See the `examples/rp2/` directory for further example code.
|