kopia lustrzana https://github.com/micropython/micropython
1361 wiersze
45 KiB
C
1361 wiersze
45 KiB
C
//*****************************************************************************
|
|
//
|
|
// aes.c
|
|
//
|
|
// Driver for the AES module.
|
|
//
|
|
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
|
//
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup AES_Advanced_Encryption_Standard_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include "inc/hw_aes.h"
|
|
#include "inc/hw_dthe.h"
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_memmap.h"
|
|
#include "inc/hw_nvic.h"
|
|
#include "inc/hw_types.h"
|
|
#include "aes.h"
|
|
#include "debug.h"
|
|
#include "interrupt.h"
|
|
|
|
#define AES_BLOCK_SIZE_IN_BYTES 16
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32Config is the configuration of the AES module.
|
|
//!
|
|
//! This function configures the AES module based on the specified parameters.
|
|
//! It does not change any DMA- or interrupt-related parameters.
|
|
//!
|
|
//! The ui32Config parameter is a bit-wise OR of a number of configuration
|
|
//! flags. The valid flags are grouped based on their function.
|
|
//!
|
|
//! The direction of the operation is specified with only of following flags:
|
|
//!
|
|
//! - \b AES_CFG_DIR_ENCRYPT - Encryption mode
|
|
//! - \b AES_CFG_DIR_DECRYPT - Decryption mode
|
|
//!
|
|
//! The key size is specified with only one of the following flags:
|
|
//!
|
|
//! - \b AES_CFG_KEY_SIZE_128BIT - Key size of 128 bits
|
|
//! - \b AES_CFG_KEY_SIZE_192BIT - Key size of 192 bits
|
|
//! - \b AES_CFG_KEY_SIZE_256BIT - Key size of 256 bits
|
|
//!
|
|
//! The mode of operation is specified with only one of the following flags.
|
|
//!
|
|
//! - \b AES_CFG_MODE_ECB - Electronic codebook mode
|
|
//! - \b AES_CFG_MODE_CBC - Cipher-block chaining mode
|
|
//! - \b AES_CFG_MODE_CFB - Cipher feedback mode
|
|
//! - \b AES_CFG_MODE_CTR - Counter mode
|
|
//! - \b AES_CFG_MODE_ICM - Integer counter mode
|
|
//! - \b AES_CFG_MODE_XTS - Ciphertext stealing mode
|
|
//! - \b AES_CFG_MODE_XTS_TWEAKJL - XEX-based tweaked-codebook mode with
|
|
//! ciphertext stealing with previous/intermediate tweak value and j loaded
|
|
//! - \b AES_CFG_MODE_XTS_K2IJL - XEX-based tweaked-codebook mode with
|
|
//! ciphertext stealing with key2, i and j loaded
|
|
//! - \b AES_CFG_MODE_XTS_K2ILJ0 - XEX-based tweaked-codebook mode with
|
|
//! ciphertext stealing with key2 and i loaded, j = 0
|
|
//! - \b AES_CFG_MODE_F8 - F8 mode
|
|
//! - \b AES_CFG_MODE_F9 - F9 mode
|
|
//! - \b AES_CFG_MODE_CBCMAC - Cipher block chaining message authentication
|
|
//! code mode
|
|
//! - \b AES_CFG_MODE_GCM - Galois/counter mode
|
|
//! - \b AES_CFG_MODE_GCM_HLY0ZERO - Galois/counter mode with GHASH with H
|
|
//! loaded and Y0-encrypted forced to zero
|
|
//! - \b AES_CFG_MODE_GCM_HLY0CALC - Galois/counter mode with GHASH with H
|
|
//! loaded and Y0-encrypted calculated internally
|
|
//! - \b AES_CFG_MODE_GCM_HY0CALC - Galois/Counter mode with autonomous GHASH
|
|
//! (both H and Y0-encrypted calculated internally)
|
|
//! - \b AES_CFG_MODE_CCM - Counter with CBC-MAC mode
|
|
//!
|
|
//! The following defines are used to specify the counter width. It is only
|
|
//! required to be defined when using CTR, CCM, or GCM modes, only one of the
|
|
//! following defines must be used to specify the counter width length:
|
|
//!
|
|
//! - \b AES_CFG_CTR_WIDTH_32 - Counter is 32 bits
|
|
//! - \b AES_CFG_CTR_WIDTH_64 - Counter is 64 bits
|
|
//! - \b AES_CFG_CTR_WIDTH_96 - Counter is 96 bits
|
|
//! - \b AES_CFG_CTR_WIDTH_128 - Counter is 128 bits
|
|
//!
|
|
//! Only one of the following defines must be used to specify the length field
|
|
//! for CCM operations (L):
|
|
//!
|
|
//! - \b AES_CFG_CCM_L_2 - 2 bytes
|
|
//! - \b AES_CFG_CCM_L_4 - 4 bytes
|
|
//! - \b AES_CFG_CCM_L_8 - 8 bytes
|
|
//!
|
|
//! Only one of the following defines must be used to specify the length of the
|
|
//! authentication field for CCM operations (M) through the \e ui32Config
|
|
//! argument in the AESConfigSet() function:
|
|
//!
|
|
//! - \b AES_CFG_CCM_M_4 - 4 bytes
|
|
//! - \b AES_CFG_CCM_M_6 - 6 bytes
|
|
//! - \b AES_CFG_CCM_M_8 - 8 bytes
|
|
//! - \b AES_CFG_CCM_M_10 - 10 bytes
|
|
//! - \b AES_CFG_CCM_M_12 - 12 bytes
|
|
//! - \b AES_CFG_CCM_M_14 - 14 bytes
|
|
//! - \b AES_CFG_CCM_M_16 - 16 bytes
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESConfigSet(uint32_t ui32Base, uint32_t ui32Config)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32Config & AES_CFG_DIR_ENCRYPT) ||
|
|
(ui32Config & AES_CFG_DIR_DECRYPT));
|
|
ASSERT((ui32Config & AES_CFG_KEY_SIZE_128BIT) ||
|
|
(ui32Config & AES_CFG_KEY_SIZE_192BIT) ||
|
|
(ui32Config & AES_CFG_KEY_SIZE_256BIT));
|
|
ASSERT((ui32Config & AES_CFG_MODE_ECB) ||
|
|
(ui32Config & AES_CFG_MODE_CBC) ||
|
|
(ui32Config & AES_CFG_MODE_CTR) ||
|
|
(ui32Config & AES_CFG_MODE_ICM) ||
|
|
(ui32Config & AES_CFG_MODE_CFB) ||
|
|
(ui32Config & AES_CFG_MODE_XTS_TWEAKJL) ||
|
|
(ui32Config & AES_CFG_MODE_XTS_K2IJL) ||
|
|
(ui32Config & AES_CFG_MODE_XTS_K2ILJ0) ||
|
|
(ui32Config & AES_CFG_MODE_F8) ||
|
|
(ui32Config & AES_CFG_MODE_F9) ||
|
|
(ui32Config & AES_CFG_MODE_CTR) ||
|
|
(ui32Config & AES_CFG_MODE_CBCMAC) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HLY0ZERO) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HLY0CALC) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HY0CALC) ||
|
|
(ui32Config & AES_CFG_MODE_CCM));
|
|
ASSERT(((ui32Config & AES_CFG_MODE_CTR) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HLY0ZERO) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HLY0CALC) ||
|
|
(ui32Config & AES_CFG_MODE_GCM_HY0CALC) ||
|
|
(ui32Config & AES_CFG_MODE_CCM)) &&
|
|
((ui32Config & AES_CFG_CTR_WIDTH_32) ||
|
|
(ui32Config & AES_CFG_CTR_WIDTH_64) ||
|
|
(ui32Config & AES_CFG_CTR_WIDTH_96) ||
|
|
(ui32Config & AES_CFG_CTR_WIDTH_128)));
|
|
ASSERT((ui32Config & AES_CFG_MODE_CCM) &&
|
|
((ui32Config & AES_CFG_CCM_L_2) ||
|
|
(ui32Config & AES_CFG_CCM_L_4) ||
|
|
(ui32Config & AES_CFG_CCM_L_8)) &&
|
|
((ui32Config & AES_CFG_CCM_M_4) ||
|
|
(ui32Config & AES_CFG_CCM_M_6) ||
|
|
(ui32Config & AES_CFG_CCM_M_8) ||
|
|
(ui32Config & AES_CFG_CCM_M_10) ||
|
|
(ui32Config & AES_CFG_CCM_M_12) ||
|
|
(ui32Config & AES_CFG_CCM_M_14) ||
|
|
(ui32Config & AES_CFG_CCM_M_16)));
|
|
|
|
//
|
|
// Backup the save context field before updating the register.
|
|
//
|
|
if(HWREG(ui32Base + AES_O_CTRL) & AES_CTRL_SAVE_CONTEXT)
|
|
{
|
|
ui32Config |= AES_CTRL_SAVE_CONTEXT;
|
|
}
|
|
|
|
//
|
|
// Write the CTRL register with the new value
|
|
//
|
|
HWREG(ui32Base + AES_O_CTRL) = ui32Config;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes the key 1 configuration registers, which are used for encryption or
|
|
//! decryption.
|
|
//!
|
|
//! \param ui32Base is the base address for the AES module.
|
|
//! \param pui8Key is an array of bytes, containing the key to be
|
|
//! configured. The least significant word in the 0th index.
|
|
//! \param ui32Keysize is the size of the key, which must be one of the
|
|
//! following values: \b AES_CFG_KEY_SIZE_128, \b AES_CFG_KEY_SIZE_192, or
|
|
//! \b AES_CFG_KEY_SIZE_256.
|
|
//!
|
|
//! This function writes key 1 configuration registers based on the key
|
|
//! size. This function is used in all modes.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESKey1Set(uint32_t ui32Base, uint8_t *pui8Key, uint32_t ui32Keysize)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32Keysize == AES_CFG_KEY_SIZE_128BIT) ||
|
|
(ui32Keysize == AES_CFG_KEY_SIZE_192BIT) ||
|
|
(ui32Keysize == AES_CFG_KEY_SIZE_256BIT));
|
|
|
|
//
|
|
// With all key sizes, the first 4 words are written.
|
|
//
|
|
HWREG(ui32Base + AES_O_KEY1_0) = * ((uint32_t *)(pui8Key + 0));
|
|
HWREG(ui32Base + AES_O_KEY1_1) = * ((uint32_t *)(pui8Key + 4));
|
|
HWREG(ui32Base + AES_O_KEY1_2) = * ((uint32_t *)(pui8Key + 8));
|
|
HWREG(ui32Base + AES_O_KEY1_3) = * ((uint32_t *)(pui8Key + 12));
|
|
|
|
//
|
|
// The key is 192 or 256 bits. Write the next 2 words.
|
|
//
|
|
if(ui32Keysize != AES_CFG_KEY_SIZE_128BIT)
|
|
{
|
|
HWREG(ui32Base + AES_O_KEY1_4) = * ((uint32_t *)(pui8Key + 16));
|
|
HWREG(ui32Base + AES_O_KEY1_5) = * ((uint32_t *)(pui8Key + 20));
|
|
}
|
|
|
|
//
|
|
// The key is 256 bits. Write the last 2 words.
|
|
//
|
|
if(ui32Keysize == AES_CFG_KEY_SIZE_256BIT)
|
|
{
|
|
HWREG(ui32Base + AES_O_KEY1_6) = * ((uint32_t *)(pui8Key + 24));
|
|
HWREG(ui32Base + AES_O_KEY1_7) = * ((uint32_t *)(pui8Key + 28));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes the key 2 configuration registers, which are used for encryption or
|
|
//! decryption.
|
|
//!
|
|
//! \param ui32Base is the base address for the AES module.
|
|
//! \param pui8Key is an array of bytes, containing the key to be
|
|
//! configured. The least significant word in the 0th index.
|
|
//! \param ui32Keysize is the size of the key, which must be one of the
|
|
//! following values: \b AES_CFG_KEY_SIZE_128, \b AES_CFG_KEY_SIZE_192, or
|
|
//! \b AES_CFG_KEY_SIZE_256.
|
|
//!
|
|
//! This function writes the key 2 configuration registers based on the key
|
|
//! size. This function is used in the F8, F9, XTS, CCM, and CBC-MAC modes.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESKey2Set(uint32_t ui32Base, uint8_t *pui8Key, uint32_t ui32Keysize)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32Keysize == AES_CFG_KEY_SIZE_128BIT) ||
|
|
(ui32Keysize == AES_CFG_KEY_SIZE_192BIT) ||
|
|
(ui32Keysize == AES_CFG_KEY_SIZE_256BIT));
|
|
|
|
//
|
|
// With all key sizes, the first 4 words are written.
|
|
//
|
|
HWREG(ui32Base + AES_O_KEY2_0) = * ((uint32_t *)(pui8Key + 0));
|
|
HWREG(ui32Base + AES_O_KEY2_1) = * ((uint32_t *)(pui8Key + 4));
|
|
HWREG(ui32Base + AES_O_KEY2_2) = * ((uint32_t *)(pui8Key + 8));
|
|
HWREG(ui32Base + AES_O_KEY2_3) = * ((uint32_t *)(pui8Key + 12));
|
|
|
|
//
|
|
// The key is 192 or 256 bits. Write the next 2 words.
|
|
//
|
|
if(ui32Keysize != AES_CFG_KEY_SIZE_128BIT)
|
|
{
|
|
HWREG(ui32Base + AES_O_KEY2_4) = * ((uint32_t *)(pui8Key + 16));
|
|
HWREG(ui32Base + AES_O_KEY2_5) = * ((uint32_t *)(pui8Key + 20));
|
|
}
|
|
|
|
//
|
|
// The key is 256 bits. Write the last 2 words.
|
|
//
|
|
if(ui32Keysize == AES_CFG_KEY_SIZE_256BIT)
|
|
{
|
|
HWREG(ui32Base + AES_O_KEY2_6) = * ((uint32_t *)(pui8Key + 24));
|
|
HWREG(ui32Base + AES_O_KEY2_7) = * ((uint32_t *)(pui8Key + 28));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes key 3 configuration registers, which are used for encryption or
|
|
//! decryption.
|
|
//!
|
|
//! \param ui32Base is the base address for the AES module.
|
|
//! \param pui8Key is a pointer to an array bytes, containing
|
|
//! the key to be configured. The least significant word is in the 0th index.
|
|
//!
|
|
//! This function writes the key 2 configuration registers with key 3 data
|
|
//! used in CBC-MAC and F8 modes. This key is always 128 bits.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESKey3Set(uint32_t ui32Base, uint8_t *pui8Key)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the key into the upper 4 key registers
|
|
//
|
|
HWREG(ui32Base + AES_O_KEY2_4) = * ((uint32_t *)(pui8Key + 0));
|
|
HWREG(ui32Base + AES_O_KEY2_5) = * ((uint32_t *)(pui8Key + 4));
|
|
HWREG(ui32Base + AES_O_KEY2_6) = * ((uint32_t *)(pui8Key + 8));
|
|
HWREG(ui32Base + AES_O_KEY2_7) = * ((uint32_t *)(pui8Key + 12));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes the Initial Vector (IV) register, needed in some of the AES Modes.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8IVdata is an array of 16 bytes (128 bits), containing the IV
|
|
//! value to be configured. The least significant word is in the 0th index.
|
|
//!
|
|
//! This functions writes the initial vector registers in the AES module.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIVSet(uint32_t ui32Base, uint8_t *pui8IVdata)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the initial vector registers.
|
|
//
|
|
HWREG(ui32Base + AES_O_IV_IN_0) = *((uint32_t *)(pui8IVdata+0));
|
|
HWREG(ui32Base + AES_O_IV_IN_1) = *((uint32_t *)(pui8IVdata+4));
|
|
HWREG(ui32Base + AES_O_IV_IN_2) = *((uint32_t *)(pui8IVdata+8));
|
|
HWREG(ui32Base + AES_O_IV_IN_3) = *((uint32_t *)(pui8IVdata+12));
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads the Initial Vector (IV) register, needed in some of the AES Modes.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8IVdata is pointer to an array of 16 bytes.
|
|
//!
|
|
//! This functions reads the initial vector registers in the AES module.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIVGet(uint32_t ui32Base, uint8_t *pui8IVdata)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the initial vector registers.
|
|
//
|
|
*((uint32_t *)(pui8IVdata+ 0)) = HWREG(ui32Base + AES_O_IV_IN_0);
|
|
*((uint32_t *)(pui8IVdata+ 4)) = HWREG(ui32Base + AES_O_IV_IN_1);
|
|
*((uint32_t *)(pui8IVdata+ 8)) = HWREG(ui32Base + AES_O_IV_IN_2);
|
|
*((uint32_t *)(pui8IVdata+12)) = HWREG(ui32Base + AES_O_IV_IN_3);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Saves the tag registers to a user-defined location.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8TagData is pointer to the location that stores the tag data.
|
|
//!
|
|
//! This function stores the tag data for use authenticated encryption and
|
|
//! decryption operations.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESTagRead(uint32_t ui32Base, uint8_t *pui8TagData)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Read the tag data.
|
|
//
|
|
*((uint32_t *)(pui8TagData+0)) = HWREG((ui32Base + AES_O_TAG_OUT_0));
|
|
*((uint32_t *)(pui8TagData+4)) = HWREG((ui32Base + AES_O_TAG_OUT_1));
|
|
*((uint32_t *)(pui8TagData+8)) = HWREG((ui32Base + AES_O_TAG_OUT_2));
|
|
*((uint32_t *)(pui8TagData+12)) = HWREG((ui32Base + AES_O_TAG_OUT_3));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Used to set the write crypto data length in the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui64Length is the crypto data length in bytes.
|
|
//!
|
|
//! This function stores the cryptographic data length in blocks for all modes.
|
|
//! Data lengths up to (2^61 - 1) bytes are allowed. For GCM, any value up
|
|
//! to (2^36 - 2) bytes are allowed because a 32-bit block counter is used. For
|
|
//! basic modes (ECB/CBC/CTR/ICM/CFB128), zero can be programmed into the
|
|
//! length field, indicating that the length is infinite.
|
|
//!
|
|
//! When this function is called, the engine is triggered to start using
|
|
//! this context.
|
|
//!
|
|
//! \note This length does not include the authentication-only data used in
|
|
//! some modes. Use the AESAuthLengthSet() function to specify the
|
|
//! authentication data length.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESDataLengthSet(uint32_t ui32Base, uint64_t ui64Length)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the length register by shifting the 64-bit ui64Length.
|
|
//
|
|
HWREG(ui32Base + AES_O_C_LENGTH_0) = (uint32_t)(ui64Length);
|
|
HWREG(ui32Base + AES_O_C_LENGTH_1) = (uint32_t)(ui64Length >> 32);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the optional additional authentication data (AAD) length.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32Length is the length in bytes.
|
|
//!
|
|
//! This function is only used to write the authentication data length in the
|
|
//! combined modes (GCM or CCM) and XTS mode. Supported AAD lengths for CCM
|
|
//! are from 0 to (2^16 - 28) bytes. For GCM, any value up to (2^32 - 1) can
|
|
//! be used. For XTS mode, this register is used to load j. Loading of j is
|
|
//! only required if j != 0. j represents the sequential number of the 128-bit
|
|
//! blocks inside the data unit. Consequently, j must be multiplied by 16
|
|
//! when passed to this function, thereby placing the block number in
|
|
//! bits [31:4] of the register.
|
|
//!
|
|
//! When this function is called, the engine is triggered to start using
|
|
//! this context for GCM and CCM.
|
|
//!
|
|
//! \return None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESAuthDataLengthSet(uint32_t ui32Base, uint32_t ui32Length)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the length into the register.
|
|
//
|
|
HWREG(ui32Base + AES_O_AUTH_LENGTH) = ui32Length;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads plaintext/ciphertext from data registers without blocking.
|
|
//! This api writes data in blocks
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Dest is a pointer to an array of words of data.
|
|
//! \param ui8Length the length can be from 1 to 16
|
|
//!
|
|
//! This function reads a block of either plaintext or ciphertext out of the
|
|
//! AES module. If the output data is not ready, the function returns
|
|
//! false. If the read completed successfully, the function returns true.
|
|
//! A block is 16 bytes or 4 words.
|
|
//!
|
|
//! \return true or false.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
AESDataReadNonBlocking(uint32_t ui32Base, uint8_t *pui8Dest, uint8_t ui8Length)
|
|
{
|
|
volatile uint32_t pui32Dest[4];
|
|
uint8_t ui8BytCnt;
|
|
uint8_t *pui8DestTemp;
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
if((ui8Length == 0)||(ui8Length>16))
|
|
{
|
|
return(false);
|
|
}
|
|
|
|
//
|
|
// Check if the output is ready before reading the data. If it not ready,
|
|
// return false.
|
|
//
|
|
if((AES_CTRL_OUTPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0)
|
|
{
|
|
return(false);
|
|
}
|
|
|
|
//
|
|
// Read a block of data from the data registers
|
|
//
|
|
pui32Dest[0] = HWREG(ui32Base + AES_O_DATA_IN_3);
|
|
pui32Dest[1] = HWREG(ui32Base + AES_O_DATA_IN_2);
|
|
pui32Dest[2] = HWREG(ui32Base + AES_O_DATA_IN_1);
|
|
pui32Dest[3] = HWREG(ui32Base + AES_O_DATA_IN_0);
|
|
|
|
//
|
|
//Copy the data to a block memory
|
|
//
|
|
pui8DestTemp = (uint8_t *)pui32Dest;
|
|
for(ui8BytCnt = 0; ui8BytCnt < ui8Length ; ui8BytCnt++)
|
|
{
|
|
*(pui8Dest+ui8BytCnt) = *(pui8DestTemp+ui8BytCnt);
|
|
}
|
|
//
|
|
// Read successful, return true.
|
|
//
|
|
return(true);
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads plaintext/ciphertext from data registers with blocking.
|
|
//! This api writes data in blocks
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Dest is a pointer to an array of words.
|
|
//! \param ui8Length is the length of data in bytes to be read.
|
|
//! ui8Length can be from 1 to 16
|
|
//!
|
|
//! This function reads a block of either plaintext or ciphertext out of the
|
|
//! AES module. If the output is not ready, the function waits until it
|
|
//! is ready. A block is 16 bytes or 4 words.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
void
|
|
AESDataRead(uint32_t ui32Base, uint8_t *pui8Dest, uint8_t ui8Length)
|
|
{
|
|
volatile uint32_t pui32Dest[4];
|
|
uint8_t ui8BytCnt;
|
|
uint8_t *pui8DestTemp;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
if((ui8Length == 0)||(ui8Length>16))
|
|
{
|
|
return;
|
|
}
|
|
|
|
|
|
//
|
|
// Wait for the output to be ready before reading the data.
|
|
//
|
|
while((AES_CTRL_OUTPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Read a block of data from the data registers
|
|
//
|
|
pui32Dest[0] = HWREG(ui32Base + AES_O_DATA_IN_3);
|
|
pui32Dest[1] = HWREG(ui32Base + AES_O_DATA_IN_2);
|
|
pui32Dest[2] = HWREG(ui32Base + AES_O_DATA_IN_1);
|
|
pui32Dest[3] = HWREG(ui32Base + AES_O_DATA_IN_0);
|
|
//
|
|
//Copy the data to a block memory
|
|
//
|
|
pui8DestTemp = (uint8_t *)pui32Dest;
|
|
for(ui8BytCnt = 0; ui8BytCnt < ui8Length ; ui8BytCnt++)
|
|
{
|
|
*(pui8Dest+ui8BytCnt) = *(pui8DestTemp+ui8BytCnt);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes plaintext/ciphertext to data registers without blocking.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Src is a pointer to an array of words of data.
|
|
//! \param ui8Length the length can be from 1 to 16
|
|
//!
|
|
//! This function writes a block of either plaintext or ciphertext into the
|
|
//! AES module. If the input is not ready, the function returns false
|
|
//! If the write completed successfully, the function returns true.
|
|
//!
|
|
//! \return True or false.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
AESDataWriteNonBlocking(uint32_t ui32Base, uint8_t *pui8Src, uint8_t ui8Length)
|
|
{
|
|
volatile uint32_t pui32Src[4]={0,0,0,0};
|
|
uint8_t ui8BytCnt;
|
|
uint8_t *pui8SrcTemp;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
if((ui8Length == 0)||(ui8Length>16))
|
|
{
|
|
return(false);
|
|
}
|
|
|
|
//
|
|
// Check if the input is ready. If not, then return false.
|
|
//
|
|
if(!(AES_CTRL_INPUT_READY & (HWREG(ui32Base + AES_O_CTRL))))
|
|
{
|
|
return(false);
|
|
}
|
|
|
|
|
|
//
|
|
//Copy the data to a block memory
|
|
//
|
|
pui8SrcTemp = (uint8_t *)pui32Src;
|
|
for(ui8BytCnt = 0; ui8BytCnt < ui8Length ; ui8BytCnt++)
|
|
{
|
|
*(pui8SrcTemp+ui8BytCnt) = *(pui8Src+ui8BytCnt);
|
|
}
|
|
//
|
|
// Write a block of data into the data registers.
|
|
//
|
|
HWREG(ui32Base + AES_O_DATA_IN_3) = pui32Src[0];
|
|
HWREG(ui32Base + AES_O_DATA_IN_2) = pui32Src[1];
|
|
HWREG(ui32Base + AES_O_DATA_IN_1) = pui32Src[2];
|
|
HWREG(ui32Base + AES_O_DATA_IN_0) = pui32Src[3];
|
|
|
|
//
|
|
// Write successful, return true.
|
|
//
|
|
return(true);
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes plaintext/ciphertext to data registers with blocking.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Src is a pointer to an array of bytes.
|
|
//! \param ui8Length the length can be from 1 to 16
|
|
//!
|
|
//! This function writes a block of either plaintext or ciphertext into the
|
|
//! AES module. If the input is not ready, the function waits until it is
|
|
//! ready before performing the write.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
void
|
|
AESDataWrite(uint32_t ui32Base, uint8_t *pui8Src, uint8_t ui8Length)
|
|
{
|
|
volatile uint32_t pui32Src[4]={0,0,0,0};
|
|
uint8_t ui8BytCnt;
|
|
uint8_t *pui8SrcTemp;
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
if((ui8Length == 0)||(ui8Length>16))
|
|
{
|
|
return;
|
|
}
|
|
//
|
|
// Wait for input ready.
|
|
//
|
|
while((AES_CTRL_INPUT_READY & (HWREG(ui32Base + AES_O_CTRL))) == 0)
|
|
{
|
|
}
|
|
|
|
//
|
|
//Copy the data to a block memory
|
|
//
|
|
pui8SrcTemp = (uint8_t *)pui32Src;
|
|
for(ui8BytCnt = 0; ui8BytCnt < ui8Length ; ui8BytCnt++)
|
|
{
|
|
*(pui8SrcTemp+ui8BytCnt) = *(pui8Src+ui8BytCnt);
|
|
}
|
|
|
|
//
|
|
// Write a block of data into the data registers.
|
|
//
|
|
HWREG(ui32Base + AES_O_DATA_IN_3) = pui32Src[0];
|
|
HWREG(ui32Base + AES_O_DATA_IN_2) = pui32Src[1];
|
|
HWREG(ui32Base + AES_O_DATA_IN_1) = pui32Src[2];
|
|
HWREG(ui32Base + AES_O_DATA_IN_0) = pui32Src[3];
|
|
}
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Used to process(transform) blocks of data, either encrypt or decrypt it.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Src is a pointer to the memory location where the input data
|
|
//! is stored.
|
|
//! \param pui8Dest is a pointer to the memory location output is written.
|
|
//! \param ui32Length is the length of the cryptographic data in bytes.
|
|
//!
|
|
//! This function iterates the encryption or decryption mechanism number over
|
|
//! the data length. Before calling this function, ensure that the AES
|
|
//! module is properly configured the key, data size, mode, etc. Only ECB,
|
|
//! CBC, CTR, ICM, CFB, XTS and F8 operating modes should be used. The data
|
|
//! is processed in 4-word (16-byte) blocks.
|
|
//!
|
|
//! \note This function only supports values of \e ui32Length less than 2^32,
|
|
//! because the memory size is restricted to between 0 to 2^32 bytes.
|
|
//!
|
|
//! \return Returns true if data was processed successfully. Returns false
|
|
//! if data processing failed.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
AESDataProcess(uint32_t ui32Base, uint8_t *pui8Src, uint8_t *pui8Dest,
|
|
uint32_t ui32Length)
|
|
{
|
|
uint32_t ui32Count, ui32BlkCount, ui32ByteCount;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the length register first, which triggers the engine to start
|
|
// using this context.
|
|
//
|
|
AESDataLengthSet(AES_BASE, (uint64_t) ui32Length);
|
|
|
|
//
|
|
// Now loop until the blocks are written.
|
|
//
|
|
ui32BlkCount = ui32Length/16;
|
|
for(ui32Count = 0; ui32Count < ui32BlkCount; ui32Count += 1)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8Src + (ui32Count*16) ,16);
|
|
|
|
//
|
|
// Read the data registers.
|
|
//
|
|
AESDataRead(ui32Base, pui8Dest + (ui32Count*16) ,16);
|
|
|
|
}
|
|
|
|
//
|
|
//Now handle the residue bytes
|
|
//
|
|
ui32ByteCount = ui32Length%16;
|
|
if(ui32ByteCount)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8Src + (16*ui32BlkCount) ,ui32ByteCount);
|
|
|
|
//
|
|
// Read the data registers.
|
|
//
|
|
AESDataRead(ui32Base, pui8Dest + (16*ui32BlkCount) ,ui32ByteCount);
|
|
}
|
|
|
|
|
|
|
|
//
|
|
// Return true to indicate successful completion of the function.
|
|
//
|
|
return(true);
|
|
}
|
|
//*****************************************************************************
|
|
//
|
|
//! Used to generate message authentication code (MAC) using CBC-MAC and F9 mode.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Src is a pointer to the memory location where the input data
|
|
//! is stored.
|
|
//! \param ui32Length is the length of the cryptographic data in bytes.
|
|
//! \param pui8Tag is a pointer to a 4-word array where the hash tag is
|
|
//! written.
|
|
//!
|
|
//! This function processes data to produce a hash tag that can be used tor
|
|
//! authentication. Before calling this function, ensure that the AES
|
|
//! module is properly configured the key, data size, mode, etc. Only
|
|
//! CBC-MAC and F9 modes should be used.
|
|
//!
|
|
//! \return Returns true if data was processed successfully. Returns false
|
|
//! if data processing failed.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
AESDataMAC(uint32_t ui32Base, uint8_t *pui8Src, uint32_t ui32Length,
|
|
uint8_t *pui8Tag)
|
|
{
|
|
uint32_t ui32Count, ui32BlkCount, ui32ByteCount;
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Write the length register first, which triggers the engine to start
|
|
// using this context.
|
|
//
|
|
AESDataLengthSet(AES_BASE, (uint64_t) ui32Length);
|
|
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
|
|
//
|
|
// Now loop until the blocks are written.
|
|
//
|
|
ui32BlkCount = ui32Length/16;
|
|
for(ui32Count = 0; ui32Count < ui32BlkCount; ui32Count += 1)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8Src + ui32Count*16 ,16);
|
|
}
|
|
|
|
//
|
|
//Now handle the residue bytes
|
|
//
|
|
ui32ByteCount = ui32Length%16;
|
|
if(ui32ByteCount)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8Src + (ui32Count*ui32BlkCount) ,ui32ByteCount);
|
|
}
|
|
|
|
//
|
|
// Wait for the context data regsiters to be ready.
|
|
//
|
|
while((AES_CTRL_SVCTXTRDY & (HWREG(AES_BASE + AES_O_CTRL))) == 0)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Read the hash tag value.
|
|
//
|
|
AESTagRead(AES_BASE, pui8Tag);
|
|
|
|
//
|
|
// Return true to indicate successful completion of the function.
|
|
//
|
|
return(true);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Used for Authenticated encryption (AE) of the data. Processes and authenticates blocks of data,
|
|
//! either encrypt the data or decrypt the data.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pui8Src is a pointer to the memory location where the input data
|
|
//! is stored. The data must be padded to the 16-byte boundary.
|
|
//! \param pui8Dest is a pointer to the memory location output is written.
|
|
//! The space for written data must be rounded up to the 16-byte boundary.
|
|
//! \param ui32Length is the length of the cryptographic data in bytes.
|
|
//! \param pui8AuthSrc is a pointer to the memory location where the
|
|
//! additional authentication data is stored. The data must be padded to the
|
|
//! 16-byte boundary.
|
|
//! \param ui32AuthLength is the length of the additional authentication
|
|
//! data in bytes.
|
|
//! \param pui8Tag is a pointer to a 4-word array where the hash tag is
|
|
//! written.
|
|
//!
|
|
//! This function encrypts or decrypts blocks of data in addition to
|
|
//! authentication data. A hash tag is also produced. Before calling this
|
|
//! function, ensure that the AES module is properly configured the key,
|
|
//! data size, mode, etc. Only CCM and GCM modes should be used.
|
|
//!
|
|
//! \return Returns true if data was processed successfully. Returns false
|
|
//! if data processing failed.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
AESDataProcessAE(uint32_t ui32Base, uint8_t *pui8Src, uint8_t *pui8Dest,
|
|
uint32_t ui32Length, uint8_t *pui8AuthSrc,
|
|
uint32_t ui32AuthLength, uint8_t *pui8Tag)
|
|
{
|
|
uint32_t ui32Count;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Set the data length.
|
|
//
|
|
AESDataLengthSet(AES_BASE, (uint64_t) ui32Length);
|
|
|
|
//
|
|
// Set the additional authentication data length.
|
|
//
|
|
AESAuthDataLengthSet(AES_BASE, ui32AuthLength);
|
|
|
|
//
|
|
// Now loop until the authentication data blocks are written.
|
|
//
|
|
for(ui32Count = 0; ui32Count < ui32AuthLength; ui32Count += 16)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8AuthSrc + (ui32Count),16);
|
|
}
|
|
|
|
//
|
|
// Now loop until the data blocks are written.
|
|
//
|
|
for(ui32Count = 0; ui32Count < ui32Length; ui32Count += 16)
|
|
{
|
|
//
|
|
// Write the data registers.
|
|
//
|
|
AESDataWrite(ui32Base, pui8Src + (ui32Count),16);
|
|
|
|
//
|
|
//
|
|
// Read the data registers.
|
|
//
|
|
AESDataRead(ui32Base, pui8Dest + (ui32Count),16);
|
|
}
|
|
|
|
//
|
|
// Wait for the context data regsiters to be ready.
|
|
//
|
|
while((AES_CTRL_SVCTXTRDY & (HWREG(AES_BASE + AES_O_CTRL))) == 0)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Read the hash tag value.
|
|
//
|
|
AESTagRead(AES_BASE, pui8Tag);
|
|
|
|
//
|
|
// Return true to indicate successful completion of the function.
|
|
//
|
|
return(true);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Returns the current AES module interrupt status.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param bMasked is \b false if the raw interrupt status is required and
|
|
//! \b true if the masked interrupt status is required.
|
|
//!
|
|
//! \return Returns a bit mask of the interrupt sources, which is a logical OR
|
|
//! of any of the following:
|
|
//!
|
|
//! - \b AES_INT_CONTEXT_IN - Context interrupt
|
|
//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt.
|
|
//! - \b AES_INT_DATA_IN - Data input interrupt
|
|
//! - \b AES_INT_DATA_OUT - Data output interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done
|
|
//! interrupt
|
|
//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt
|
|
//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
AESIntStatus(uint32_t ui32Base, bool bMasked)
|
|
{
|
|
uint32_t ui32Temp;
|
|
uint32_t ui32IrqEnable;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Read the IRQ status register and return the value.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
ui32Temp = HWREG(DTHE_BASE + DTHE_O_AES_MIS);
|
|
ui32IrqEnable = HWREG(ui32Base + AES_O_IRQENABLE);
|
|
return((HWREG(ui32Base + AES_O_IRQSTATUS) &
|
|
ui32IrqEnable) | ((ui32Temp & 0x0000000F) << 16));
|
|
}
|
|
else
|
|
{
|
|
ui32Temp = HWREG(DTHE_BASE + DTHE_O_AES_RIS);
|
|
return(HWREG(ui32Base + AES_O_IRQSTATUS) |
|
|
((ui32Temp & 0x0000000F) << 16));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables AES module interrupts.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32IntFlags is a bit mask of the interrupt sources to enable.
|
|
//!
|
|
//! This function enables the interrupts in the AES module. The \e ui32IntFlags
|
|
//! parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b AES_INT_CONTEXT_IN - Context interrupt
|
|
//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt
|
|
//! - \b AES_INT_DATA_IN - Data input interrupt
|
|
//! - \b AES_INT_DATA_OUT - Data output interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done
|
|
//! interrupt
|
|
//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt
|
|
//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt
|
|
//!
|
|
//! \note Interrupts that have been previously been enabled are not disabled
|
|
//! when this function is called.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIntEnable(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32IntFlags == AES_INT_CONTEXT_IN) ||
|
|
(ui32IntFlags == AES_INT_CONTEXT_OUT) ||
|
|
(ui32IntFlags == AES_INT_DATA_IN) ||
|
|
(ui32IntFlags == AES_INT_DATA_OUT) ||
|
|
(ui32IntFlags == AES_INT_DMA_CONTEXT_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_OUT));
|
|
|
|
//
|
|
// Set the flags.
|
|
//
|
|
HWREG(DTHE_BASE + DTHE_O_AES_IM) &= ~((ui32IntFlags & 0x000F0000) >> 16);
|
|
HWREG(ui32Base + AES_O_IRQENABLE) |= ui32IntFlags & 0x0000ffff;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables AES module interrupts.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32IntFlags is a bit mask of the interrupt sources to disable.
|
|
//!
|
|
//! This function disables the interrupt sources in the AES module. The
|
|
//! \e ui32IntFlags parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b AES_INT_CONTEXT_IN - Context interrupt
|
|
//! - \b AES_INT_CONTEXT_OUT - Authentication tag (and IV) interrupt
|
|
//! - \b AES_INT_DATA_IN - Data input interrupt
|
|
//! - \b AES_INT_DATA_OUT - Data output interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done
|
|
//! interrupt
|
|
//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt
|
|
//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt
|
|
//!
|
|
//! \note The DMA done interrupts are the only interrupts that can be cleared.
|
|
//! The remaining interrupts can be disabled instead using AESIntDisable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIntDisable(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32IntFlags == AES_INT_CONTEXT_IN) ||
|
|
(ui32IntFlags == AES_INT_CONTEXT_OUT) ||
|
|
(ui32IntFlags == AES_INT_DATA_IN) ||
|
|
(ui32IntFlags == AES_INT_DATA_OUT) ||
|
|
(ui32IntFlags == AES_INT_DMA_CONTEXT_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_OUT));
|
|
|
|
//
|
|
// Clear the flags.
|
|
//
|
|
HWREG(DTHE_BASE + DTHE_O_AES_IM) |= ((ui32IntFlags & 0x000F0000) >> 16);
|
|
HWREG(ui32Base + AES_O_IRQENABLE) &= ~(ui32IntFlags & 0x0000ffff);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears AES module interrupts.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32IntFlags is a bit mask of the interrupt sources to disable.
|
|
//!
|
|
//! This function clears the interrupt sources in the AES module. The
|
|
//! \e ui32IntFlags parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b AES_INT_DMA_CONTEXT_IN - Context DMA done interrupt
|
|
//! - \b AES_INT_DMA_CONTEXT_OUT - Authentication tag (and IV) DMA done
|
|
//! interrupt
|
|
//! - \b AES_INT_DMA_DATA_IN - Data input DMA done interrupt
|
|
//! - \b AES_INT_DMA_DATA_OUT - Data output DMA done interrupt
|
|
//!
|
|
//! \note Only the DMA done interrupts can be cleared. The remaining
|
|
//! interrupts should be disabled with AESIntDisable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIntClear(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32IntFlags == AES_INT_DMA_CONTEXT_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_CONTEXT_OUT) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_IN) ||
|
|
(ui32IntFlags == AES_INT_DMA_DATA_OUT));
|
|
|
|
HWREG(DTHE_BASE + DTHE_O_AES_IC) = ((ui32IntFlags >> 16) & 0x0000000F);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! enabled AES interrupts occur.
|
|
//!
|
|
//! This function registers the interrupt handler in the interrupt vector
|
|
//! table, and enables AES interrupts on the interrupt controller; specific AES
|
|
//! interrupt sources must be enabled using AESIntEnable(). The interrupt
|
|
//! handler being registered must clear the source of the interrupt using
|
|
//! AESIntClear().
|
|
//!
|
|
//! If the application is using a static interrupt vector table stored in
|
|
//! flash, then it is not necessary to register the interrupt handler this way.
|
|
//! Instead, IntEnable() is used to enable AES interrupts on the
|
|
//! interrupt controller.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIntRegister(uint32_t ui32Base, void(*pfnHandler)(void))
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Register the interrupt handler.
|
|
//
|
|
IntRegister(INT_AES, pfnHandler);
|
|
|
|
//
|
|
// Enable the interrupt
|
|
//
|
|
IntEnable(INT_AES);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters an interrupt handler for the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//!
|
|
//! This function unregisters the previously registered interrupt handler and
|
|
//! disables the interrupt in the interrupt controller.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESIntUnregister(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(INT_AES);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(INT_AES);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables uDMA requests for the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32Flags is a bit mask of the uDMA requests to be enabled.
|
|
//!
|
|
//! This function enables the uDMA request sources in the AES module.
|
|
//! The \e ui32Flags parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b AES_DMA_DATA_IN
|
|
//! - \b AES_DMA_DATA_OUT
|
|
//! - \b AES_DMA_CONTEXT_IN
|
|
//! - \b AES_DMA_CONTEXT_OUT
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESDMAEnable(uint32_t ui32Base, uint32_t ui32Flags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32Flags == AES_DMA_DATA_IN) ||
|
|
(ui32Flags == AES_DMA_DATA_OUT) ||
|
|
(ui32Flags == AES_DMA_CONTEXT_IN) ||
|
|
(ui32Flags == AES_DMA_CONTEXT_OUT));
|
|
|
|
//
|
|
// Set the flags in the current register value.
|
|
//
|
|
HWREG(ui32Base + AES_O_SYSCONFIG) |= ui32Flags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables uDMA requests for the AES module.
|
|
//!
|
|
//! \param ui32Base is the base address of the AES module.
|
|
//! \param ui32Flags is a bit mask of the uDMA requests to be disabled.
|
|
//!
|
|
//! This function disables the uDMA request sources in the AES module.
|
|
//! The \e ui32Flags parameter is the logical OR of any of the
|
|
//! following:
|
|
//!
|
|
//! - \b AES_DMA_DATA_IN
|
|
//! - \b AES_DMA_DATA_OUT
|
|
//! - \b AES_DMA_CONTEXT_IN
|
|
//! - \b AES_DMA_CONTEXT_OUT
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
AESDMADisable(uint32_t ui32Base, uint32_t ui32Flags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Base == AES_BASE);
|
|
ASSERT((ui32Flags == AES_DMA_DATA_IN) ||
|
|
(ui32Flags == AES_DMA_DATA_OUT) ||
|
|
(ui32Flags == AES_DMA_CONTEXT_IN) ||
|
|
(ui32Flags == AES_DMA_CONTEXT_OUT));
|
|
|
|
//
|
|
// Clear the flags in the current register value.
|
|
//
|
|
HWREG(ui32Base + AES_O_SYSCONFIG) &= ~ui32Flags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|