Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.
Signed-off-by: Damien George <damien@micropython.org>
Added a 4MiB flash partitioning variant for ESP32S3: adds support for 4MiB
discrete flash boards or ESP32-S3FH4R2 with embedded 4MiB flash based ones.
Tested on the waveshare ESP32-S3 Mini w/ESP32-S3FH4R2.
Signed-off-by: Stanislav Ponomarev <me@stasponomarev.com>
If the `timeout_char` parameter is not given, we should still configure the
UART to ensure the UART is always initialized consistently. So the default
of 0 gets applied correctly, or if, for example, the baudrate was changed
the char timeout isn't still based on the old baudrate causing weird
behaviour, etc.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Prior to this commit, the pin defined for power would be used by the
esp_idf driver to reset the PHY. That worked, but sometimes the MDIO
configuration started before the power was fully settled, leading to an
error.
With the change in this commit, the power for the PHY is independently
enabled in network_lan.c with a 100ms delay to allow the power to settle.
A separate define for a reset pin is provided, even if the PHY reset
pin is rarely connected.
Fixes issue #14013.
Signed-off-by: robert-hh <robert@hammelrath.com>
On these targets it's possible to enter the bootloader by setting a bit in
an RTC register before resetting.
Structure it in a way that a board can still provide a custom bootloader
handler. The handler here will be the default if none is provided, for any
board based on the supported targets.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Currently only the Arduino Nano ESP32 defines a machine.bootloader handler
for ESP32. All other boards will intentionally hang.
There is no error message, nor is a NotImplementedError raised. There's no
indication if Micropython has crashed, or if the bootloader was entered but
USB is not working, which is a real problem the ESP32 bootloader has. It's
not possible escape from this hang with ^C or any other means besides
physical access to the reset pin or the ability to cycle power.
Change this to only define an implementation of machine.bootloader() when
there is a handler for it.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The new IDF v5.2 deprecated the task cleanup callback we use, so support
for the new option has been implemented in the previous commit. This also
requires a change in the sdkconfig, via a new variable
${SDKCONFIG_IDF_VERSION_SPECIFIC} which is used in all mpconfigboard.cmake
files to include an extra sdkconfig file based on the IDF version in use.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
The legacy I2S "shim" is removed and replaced by the new I2S driver. The
new driver fixes a bug where mono audio plays only in one channel.
Application code size is reduced by 2672 bytes with this change. Tested on
ESP32, ESP32+spiram, ESP32-S3 using example code from
https://github.com/miketeachman/micropython-i2s-examples
Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Because `mpthreadport.h` is included by `mpthread.h`.
Also remove unnecessary include of `mpthreadport.h` in esp32's `main.c`.
Signed-off-by: Damien George <damien@micropython.org>
This combines the argument parsing and checking for the machine.SPI.init()
and machine.SPI() interfaces.
The only real difference was unspecified arguments in init() mean to keep
the same value, while in new they get default values.
Behavior has changed for passing the "id" argument to init(). On other
ports this isn't allowed. But on esp32 it would change the SPI controller
of the static SPI instance to the new id. This results in multiple static
spi objects for the same controller and they would fight over which one has
inconsistent mpy vs esp-idf state. This has been changed to not allow "id"
with init(), like other ports.
In a few causes, a loop is used over arguments that are handled the same
way instead of cut & pasting the same stanza of code for each argument.
The init_internal function had a lot of arguments, which is not efficient
to pass. Pass the args mp_arg_val_t array instead as a single argument.
This reduced both the number of C lines and the compiled code size.
Summary of code size change: Two argument lists of 72 bytes are replaced
by a single shared 72 byte list. New shared argument parsing code is small
enough to be inlined, but is still efficient enough to shrink the overall
code size by 349 bytes of the three argument handlering functions.
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-349 (-349)
Function old new delta
machine_hw_spi_make_new 255 203 -52
machine_hw_spi_init 122 67 -55
machine_hw_spi_init_internal 698 456 -242
Total: Before=1227667, After=1227318, chg -0.03%
add/remove: 2/0 grow/shrink: 0/2 up/down: 92/-144 (-52)
Data old new delta
spi_allowed_args - 72 +72
defaults$0 - 20 +20
allowed_args$1 240 168 -72
allowed_args$0 1080 1008 -72
Total: Before=165430, After=165378, chg -0.03%
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The Python BLE IRQ handler will most likely run on the NimBLE task, so its
C stack must be large enough to accommodate reasonably complicated Python
code (eg a few call depths). So increase this stack size.
Also increase the headroom from 1024 to 2048 bytes. This is needed because
(1) the esp32 architecture uses a fair amount of stack in general; and (2)
by the time execution gets to setting the Python stack top via
`mp_stack_set_top()` in this interlock code, about 600 bytes of stack are
already used, which reduces the amount available for Python.
Fixes issue #12349.
Signed-off-by: Damien George <damien@micropython.org>
In case callbacks must run (eg a disconnect event happens during the
deinit) and the GIL must be obtained to run the callback.
Fixes part of issue #12349.
Signed-off-by: Damien George <damien@micropython.org>
PPP is not that commonly used, let it be turned off in the board config to
save space. It is still on by default.
On an basic ESP32-S3 build, turning off PPP with LWIP still on saves ~35 kB
of codend 4 kB of data.
text data bss dec hex filename
1321257 304296 2941433 4566986 45afca before-ppp-off.elf
1285101 299920 2810305 4395326 43113e after-ppp-off.elf
-------------------------------
-36156 -4376 -56
Note that the BSS segment size includes all NOBITS sections in ELF file.
Some of these are aligned to 64kB chunk sized dummy blocks, I think for
alignment to MMU boundaries, and these went down by 1 block each, so 128
kiB of BSS is not really part of the binary size reduction.
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The standard Arduino pinout uses LEDR/G/B and LED_BUILTIN (if available).
This patch adds aliases to match the standard pinout, while retaining
LED_RED/GREEN/BLUE for compatibility with existing scripts and examples.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Make can't handle paths with spaces, see https://savannah.gnu.org/bugs/?712
The following workarounds exist:
- When using make's built-in functions:
- Use relative paths wherever possible to avoid spaces in the first
place.
- All spaces in paths can be escaped with backslashes; quotes don't
work.
- Some users use the shell to temporarily rename directories, or to
create symlinks without spaces.
- When using make to pass commands to the system's shell, enclose paths in
quotes. While make will still interpret quoted strings with spaces as
multiple words, the system's shell will correctly parse the resulting
command.
This commit contains the following fixes:
- In ports/stm32/mboot/Makefile: Use relative paths to avoid spaces when
using built-in functions.
- In all other files: Use quotes to enclose paths when make is used to call
shell functions.
All changes have been tested with a directory containing spaces.
Signed-off-by: Iksas <iksas@mailbox.org>
- Completes a longstanding TODO in the code, to not ignore
the optional family, type, proto and flags arguments to
socket.getaddrinfo().
- Note that passing family=socket.AF_INET6 will now cause queries
to fail (OSError -202). Previously this argument was ignored so
IPV4 results were returned instead.
- Optional 'type' argument is now always copied into the result. If not
set, results have type SOCK_STREAM.
- Fixes inconsistency where previously querying mDNS local suffix (.local)
hostnames returned results with socket type 0 (invalid), but all other
queries returned results with socket type SOCK_STREAM (regardless of
'type' argument).
- Optional proto argument is now returned in the result tuple, if supplied.
- Optional flags argument is now passed through to lwIP. lwIP has handling
for AI_NUMERICHOST, AI_V4MAPPED, AI_PASSIVE (untested, constants for
these are not currently exposed in the esp32 socket module).
- Also fixes a possible memory leak in an obscure code path
(lwip_getaddrinfo apparently sometimes returns a result structure with
address "0.0.0.0" instead of failing, and this structure would have been
leaked.)
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Instead, configure the default once at compile-time. This means the GAP
name will no longer be set to default after re-initializing Bluetooth.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
MicroPython code may rely on the return value of sys.stdout.buffer.write()
to reflect the number of bytes actually written. While in most scenarios a
write() operation is successful, there are cases where it fails, leading to
data loss. This problem arises because, currently, write() merely returns
the number of bytes it was supposed to write, without indication of
failure.
One scenario where write() might fail, is where USB is used and the
receiving end doesn't read quickly enough to empty the receive buffer. In
that case, write() on the MicroPython side can timeout, resulting in the
loss of data without any indication, a behavior observed notably in
communication between a Pi Pico as a client and a Linux host using the ACM
driver.
A complex issue arises with mp_hal_stdout_tx_strn() when it involves
multiple outputs, such as USB, dupterm and hardware UART. The challenge is
in handling cases where writing to one output is successful, but another
fails, either fully or partially. This patch implements the following
solution:
mp_hal_stdout_tx_strn() attempts to write len bytes to all of the possible
destinations for that data, and returns the minimum successful write
length.
The implementation of this is complicated by several factors:
- multiple outputs may be enabled or disabled at compiled time
- multiple outputs may be enabled or disabled at runtime
- mp_os_dupterm_tx_strn() is one such output, optionally containing
multiple additional outputs
- each of these outputs may or may not be able to report success
- each of these outputs may or may not be able to report partial writes
As a result, there's no single strategy that fits all ports, necessitating
unique logic for each instance of mp_hal_stdout_tx_strn().
Note that addressing sys.stdout.write() is more complex due to its data
modification process ("cooked" output), and it remains unchanged in this
patch. Developers who are concerned about accurate return values from
write operations should use sys.stdout.buffer.write().
This patch might disrupt some existing code, but it's also expected to
resolve issues, considering that the peculiar return value behavior of
sys.stdout.buffer.write() is not well-documented and likely not widely
known. Therefore, it's improbable that much existing code relies on the
previous behavior.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
This gets back the old heap-size behaviour on ESP32, before auto-split-heap
was introduced: after the heap is grown one time the size is 111936 bytes,
with about 40k left for the IDF. That's enough to start WiFi and do a
HTTPS request.
Signed-off-by: Damien George <damien@micropython.org>
esp8266 doesn't need ets task because the notify is now scheduled (see
commits 7d57037906 and
c60caf1995 for relevant history).
Signed-off-by: Damien George <damien@micropython.org>
Also, IDF v5.1.2 is now supported, just not used by default.
IDF v5.0.2 still builds but we cannot guarantee continued support for this
version moving forward.
Signed-off-by: IhorNehrutsa <IhorNehrutsa@gmail.com>
Disable unused EC curves and default certificate bundle which is not
implemented in MicroPython. This reduces the firmware size significantly.
This follows commit 68f166dae9.
Signed-off-by: Carlos Gil Gonzalez <carlosgilglez@gmail.com>
The installation instructions for ESP32 TinyPICO board contained a typo
that used a non-standard baud rate 912600 instead of 921600. This made the
upload command fail on some Windows computers.
Signed-off-by: Scott Zhao <zhaomh1998@outlook.com>
The user memory area - accessible by machine.RTC.memory() -- will now
survive most reboot causes. A power-on reset (also caused by the EN pin on
some boards) will clean the memory. When this happens, the magic number
not found in the user memory will cause initialization.
After other resets (triggered by watchdogs, machine.reset(), ...), the user
is responsible to check and validate the contents of the user area.
This new behaviour can be changed by enabling
MICROPY_HW_RTC_MEM_INIT_ALWAYS: in that case the RTC memory is always
cleared on boot.
Signed-off-by: Thomas Wenrich <twenrich@gmail.com>
The amount of free IRAM in ESP32 SPIRAM builds is very small and went over
the limit due to commit 30b0ee34d3. This
commit enables further optimisations to reduce IRAM usage.
Signed-off-by: Damien George <damien@micropython.org>
Also move MICROPY_PY_PENDSV_ENTER/REENTER/EXIT to mphalport.h, for ports
where these are not already there.
This helps separate the hardware implementation of these macros from the
MicroPython configuration (eg for renesas-ra and stm32, the IRQ static
inline helper functions can now be moved to irq.h).
Signed-off-by: Damien George <damien@micropython.org>
The ports esp32, mimxrt, rp2 and samd all shared exactly the same
implementation of machine.disable_irq() and machine.enable_irq(),
implemented in terms of MICROPY_{BEGIN,END}_ATOMIC_SECTION. This commit
factors these implementations into extmod/modmachine.c.
The cc3200, esp8266, nrf, renesas-ra and stm32 ports do not yet use this
common implementation.
Signed-off-by: Damien George <damien@micropython.org>
Minor changes for consistency are:
- nrf gains: unique_id(), freq() [they do nothing]
- samd: deepsleep() now resets after calling lightsleep()
- esp32: lightsleep()/deepsleep() no longer take kw arg "sleep", instead
it's positional to match others. also, passing 0 here will now do a 0ms
sleep instead of acting like nothing was passed.
reset_cause() no longer takes any args (before it would just ignore them)
- mimxrt: freq() with an argument and lightsleep() both raise
NotImplementedError
Signed-off-by: Damien George <damien@micropython.org>
And use it in all ports. The ports are unchanged, except esp8266 which now
just returns None from this function instead of the time elapsed (to match
other ports), and qemu-arm which gains this function.
Signed-off-by: Damien George <damien@micropython.org>
This is a code factoring to have the dict for the machine module in one
location, and all the ports use that same dict. The machine.soft_reset()
function implementation is also factored because it's the same for all
ports that did already implement it. Eventually more functions/bindings
can be factored.
All ports remain functionally the same, except:
- cc3200 port: gains soft_reset, mem8, mem16, mem32, Signal; loses POWER_ON
(which was a legacy constant, replaced long ago by PWRON_RESET)
- nrf port: gains Signal
- qemu-arm port: gains soft_reset
- unix port: gains soft_reset
- zephyr port: gains soft_reset, mem8, mem16, mem32
Signed-off-by: Damien George <damien@micropython.org>