Change the image path back after merging

README.md

@@ -4,11 +4,11 @@ ST7789 Driver for MicroPython
 
 Overview
 --------
-This is a driver for MicroPython to handle cheap displays 
+This is a driver for MicroPython to handle cheap displays
-based on ST7789 chip. 
+based on ST7789 chip.
 
 <p align="center">
-  <img src="https://raw.githubusercontent.com/dvarrel/st7789_mpy/master/docs/ST7789.jpg" alt="ST7789 display photo"/>
+  <img src="https://raw.githubusercontent.com/devbis/st7789_mpy/master/docs/ST7789.jpg" alt="ST7789 display photo"/>
 </p>
 
 It supports both 240x240 and 135x240 variants of displays.
@@ -22,7 +22,7 @@ Building instruction
 ---------------------
 
 Prepare build tools as described in the manual.
-You should follow the instruction for building MicroPython and 
+You should follow the instruction for building MicroPython and
 ensure that you can build the firmware without this display module.
 
 Clone this module alongside the MPY sources:
@@ -33,21 +33,21 @@ Go to MicroPython ports directory and for ESP8266 run:
 
     $ cd micropython/ports/esp8266
 
-for ESP32: 
+for ESP32:
 
     $ cd micropython/ports/esp32
 
 And then compile the module with specified USER_C_MODULES dir
 
     $ make USER_C_MODULES=../../../st7789_mpy/ all
-    
+
-    
+
-If you have other user modules, copy the st7789_driver/st7789 to 
+If you have other user modules, copy the st7789_driver/st7789 to
 the user modules directory
 
-Upload the resulting firmware to your MCU as usual with esptool.py 
+Upload the resulting firmware to your MCU as usual with esptool.py
-(See 
+(See
-[MicroPython docs](http://docs.micropython.org/en/latest/esp8266/tutorial/intro.html#deploying-the-firmware) 
+[MicroPython docs](http://docs.micropython.org/en/latest/esp8266/tutorial/intro.html#deploying-the-firmware)
 for more info)
 
     $ make deploy
@@ -57,12 +57,12 @@ Working examples
 
 This module was tested on ESP32 and ESP8266 MCUs.
 
-You have to provide `machine.SPI` object and at least two pins for RESET and 
+You have to provide `machine.SPI` object and at least two pins for RESET and
-DC pins on the screen for the display object. 
+DC pins on the screen for the display object.
 
 
     # ESP 8266
-    
+
     import machine
     import st7789
     spi = machine.SPI(1, baudrate=40000000, polarity=1)
@@ -72,7 +72,7 @@ DC pins on the screen for the display object.
 
 For ESP32 modules you have to provide specific pins for SPI.
 Unfortunately, I was unable to run this display on SPI(1) interface.
-For machine.SPI(2) == VSPI you have to use 
+For machine.SPI(2) == VSPI you have to use
 
 - CLK: Pin(18)
 - MOSI: Pin(23)
@@ -104,27 +104,27 @@ This driver supports only 16bit colors in RGB565 notation.
 - `ST7789.pixel(x, y, color)`
 
   Set the specified pixel to the given color.
-  
+
 - `ST7789.line(x0, y0, x1, y1, color)`
 
-  Draws a single line with the provided `color` from (`x0`, `y0`) to 
+  Draws a single line with the provided `color` from (`x0`, `y0`) to
   (`x1`, `y1`).
 
 - `ST7789.hline(x, y, length, color)`
 
-  Draws a single horizontal line with the provided `color` and `length` 
+  Draws a single horizontal line with the provided `color` and `length`
-  in pixels. Along with `vline`, this is a fast version with reduced 
+  in pixels. Along with `vline`, this is a fast version with reduced
   number of SPI calls.
 
 - `ST7789.vline(x, y, length, color)`
 
-  Draws a single horizontal line with the provided `color` and `length` 
+  Draws a single horizontal line with the provided `color` and `length`
   in pixels.
 
 - `ST7789.rect(x, y, width, height, color)`
 
   Draws a rectangle from (`x`, `y`) with corresponding dimensions
-  
+
 - `ST7789.fill_rect(x, y, width, height, color)`
 
   Fill a rectangle starting from (`x`, `y`) coordinates
@@ -144,22 +144,22 @@ Helper functions
 - `color565(r, g, b)`
 
   Pack a color into 2-bytes rgb565 format
-  
+
 - `map_bitarray_to_rgb565(bitarray, buffer, width, color=WHITE, bg_color=BLACK)`
 
   Convert a bitarray to the rgb565 color buffer which is suitable for blitting.
   Bit 1 in bitarray is a pixel with `color` and 0 - with `bg_color`.
-  
+
-  This is a helper with a good performance to print text with a high 
+  This is a helper with a good performance to print text with a high
-  resolution font. You can use an awesome tool 
+  resolution font. You can use an awesome tool
   https://github.com/peterhinch/micropython-font-to-py
-  to generate a bitmap fonts from .ttf and use them as a frozen bytecode from 
+  to generate a bitmap fonts from .ttf and use them as a frozen bytecode from
   the ROM memory.
 
 Performance
 -----------
 
-For the comparison I used an excellent library for Arduino 
+For the comparison I used an excellent library for Arduino
 that can handle this screen.
 
 https://github.com/ananevilya/Arduino-ST7789-Library/
@@ -186,7 +186,7 @@ Troubleshooting
 
 #### Overflow of iram1_0_seg
 
-When building a firmware for esp8266 you can see this failure message from 
+When building a firmware for esp8266 you can see this failure message from
 the linker:
 
     LINK build/firmware.elf
@@ -194,7 +194,7 @@ the linker:
     xtensa-lx106-elf-ld: region `iram1_0_seg' overflowed by 292 bytes
     Makefile:192: recipe for target 'build/firmware.elf' failed
 
-To fix this issue, you have to put st7789 module to irom0 section. 
+To fix this issue, you have to put st7789 module to irom0 section.
 Edit `esp8266_common.ld` file in the `ports/esp8266` dir and add a line
 
     *st7789/*.o(.literal* .text*)
@@ -205,6 +205,6 @@ in the `.irom0.text : ALIGN(4)` section
 #### Unsupported dimensions
 
 This driver supports only 240x240 and 135x240 pixel displays.
-If you have a display with an unsupported resolution, you can pass 
+If you have a display with an unsupported resolution, you can pass
-`xstart` and `ystart` parameters to the display constructor to set the 
+`xstart` and `ystart` parameters to the display constructor to set the
 required offsets.