micropython-nano-gui/drivers/st7789/st7789_4bit.py

# st7789.py Driver for ST7789 LCD displays for nano-gui

# Released under the MIT License (MIT). See LICENSE.
# Copyright (c) 2021 Peter Hinch

# Tested display
# Adafruit 1.3" 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789
# https://www.adafruit.com/product/4313
# Based on
# Adfruit https://github.com/adafruit/Adafruit_CircuitPython_ST7789/blob/master/adafruit_st7789.py
# Also see st7735r_4bit.py for other source acknowledgements

# SPI bus: default mode. Driver performs no read cycles.
# Datasheet table 6 p44 scl write cycle 16ns == 62.5MHz

from time import sleep_ms #, ticks_us, ticks_diff
import framebuf
import gc
import micropython
import uasyncio as asyncio

PORTRAIT = 0x20
REFLECT = 0x40
USD = 0x80


@micropython.viper
def _lcopy(dest:ptr8, source:ptr8, lut:ptr8, length:int):
    n = 0
    for x in range(length):
        c = source[x]
        d = (c & 0xf0) >> 3  # 2* LUT indices (LUT is 16 bit color)
        e = (c & 0x0f) << 1
        dest[n] = lut[d]
        n += 1
        dest[n] = lut[d + 1]
        n += 1
        dest[n] = lut[e]
        n += 1
        dest[n] = lut[e + 1]
        n += 1

class ST7789(framebuf.FrameBuffer):

    lut = bytearray(32)

    # Convert r, g, b in range 0-255 to a 16 bit colour value
    # LS byte goes into LUT offset 0, MS byte into offset 1
    # Same mapping in linebuf so LS byte is shifted out 1st
    # For some reason color must be inverted on this controller.
    @staticmethod
    def rgb(r, g, b):
        return ((b & 0xf8) << 5 | (g & 0x1c) << 11 | (g & 0xe0) >> 5 | (r & 0xf8)) ^ 0xffff

    # rst and cs are active low, SPI is mode 0
    def __init__(self, spi, cs, dc, rst, height=240, width=240,
                 disp_mode=0, init_spi=False, offset=(0, 0):
        self._spi = spi  # Clock cycle time for write 16ns 62.5MHz max (read is 150ns)
        self._rst = rst  # Pins
        self._dc = dc
        self._cs = cs
        self.height = height  # Required by Writer class
        self.width = width
        self._offset = offset
        self._spi_init = init_spi  # Possible user callback
        self._lock = asyncio.Lock()
        mode = framebuf.GS4_HMSB  # Use 4bit greyscale.
        gc.collect()
        buf = bytearray(height * width // 2)
        self._mvb = memoryview(buf)
        super().__init__(buf, width, height, mode)
        self._linebuf = bytearray(self.width * 2)  # 16 bit color out
        self._init(disp_mode)
        self.show()

    # Hardware reset
    def _hwreset(self):
        self._dc(0)
        self._rst(1)
        sleep_ms(1)
        self._rst(0)
        sleep_ms(1)
        self._rst(1)
        sleep_ms(1)

    # Write a command, a bytes instance (in practice 1 byte).
    def _wcmd(self, buf):
        self._dc(0)
        self._cs(0)
        self._spi.write(buf)
        self._cs(1)

    # Write a command followed by a data arg.
    def _wcd(self, c, d):
        self._dc(0)
        self._cs(0)
        self._spi.write(c)
        self._cs(1)
        self._dc(1)
        self._cs(0)
        self._spi.write(d)
        self._cs(1)

    # Initialise the hardware. Blocks 163ms. Adafruit have various sleep delays
    # where I can find no requirement in the datasheet. I removed them with
    # other redundant code.
    def _init(self, disp_mode):
        self._hwreset()  # Hardware reset. Blocks 3ms
        if self._spi_init:  # A callback was passed
            self._spi_init(self._spi)  # Bus may be shared
        cmd = self._wcmd
        wcd = self._wcd
        cmd(b'\x01')  # SW reset datasheet specifies 120ms before SLPOUT
        sleep_ms(150)
        cmd(b'\x11')  # SLPOUT: exit sleep mode
        sleep_ms(10)  # ? Adafruit delay 500ms (datsheet 5ms)
        wcd(b'\x3a', b'\x55')  # _COLMOD 16 bit/pixel, 64Kib color space
        cmd(b'\x20') # INVOFF Adafruit turn inversion on. This driver fixes .rgb
        cmd(b'\x13')  # NORON Normal display mode

        # Adafruit skip setting CA and RA. We do it to enable rotation and
        # reflection. Also hopefully to localise any display portability issues?
        # Set display window depending on mode, .height and .width.
        self.set_window(disp_mode)
        # d7..d5 of MADCTL determine rotation/orientation datasheet P124, P231
        # d7 = MY page addr order
        # d6 = MX col addr order
        # d5 = MV row/col exchange
        wcd(b'\x36', int.to_bytes(disp_mode, 1, 'little'))
        cmd(b'\x29')  # DISPON. Adafruit then delay 500ms.

    # Define the mapping between RAM and the display
    # May need modifying for non-Adafruit hardware which may use a different
    # mapping between chip RAM and LCD. Datasheet section 8.12 p124.
    def set_window(self, mode):
        rht = 320
        rwd = 240  # RAM ht and width
        wht = self.height
        wwd = self.width  # Window dimensions
        # Determine x and y start and end. Defaults for LANDSCAPE and PORTRAIT
        ys = 0  # y start
        ye = wht - 1  # y end
        yoff = self._offset[1]
        xs = 0
        xe = wwd - 1
        xoff = self._offset[0]
        if mode & PORTRAIT:
            if mode & REFLECT:
                ys = rwd - wht
                ye = rwd - 1
            if mode & USD:
                xs = rht - wwd
                xe = rht - 1
        else:  # LANDSCAPE
            if mode & REFLECT:
                xs = rwd - wht
                xe = rwd - 1
            if mode & USD:
                ys = rht - wwd
                ye = rht - 1
        # Col address set. Add in any offset.
        xs += xoff
        xe += xoff
        self._wcd(b'\x2a', int.to_bytes(xs, 2, 'big') + int.to_bytes(xe, 2, 'big'))
        # Row address set
        ys += yoff
        ye += yoff
        self._wcd(b'\x2b', int.to_bytes(ys, 2, 'big') + int.to_bytes(ye, 2, 'big'))

    #@micropython.native # Made virtually no difference to timing.
    def show(self):  # Blocks for 83ms @60MHz SPI
        #ts = ticks_us()
        clut = ST7789.lut
        wd = self.width // 2
        end = self.height * wd
        lb = self._linebuf
        buf = self._mvb
        if self._spi_init:  # A callback was passed
            self._spi_init(self._spi)  # Bus may be shared
        self._dc(0)
        self._cs(0)
        self._spi.write(b'\x2c')  # RAMWR
        self._dc(1)
        for start in range(0, end, wd):
            _lcopy(lb, buf[start :], clut, wd)  # Copy and map colors
            self._spi.write(lb)
        self._cs(1)
        #print(ticks_diff(ticks_us(), ts))

    # Asynchronous refresh with support for reducing blocking time.
    async def do_refresh(self, split=4):
        async with self._lock:
            lines, mod = divmod(self.height, split)  # Lines per segment
            if mod:
                raise ValueError('Invalid do_refresh arg.')
            clut = ST7789.lut
            wd = self.width // 2
            lb = self._linebuf
            buf = self._mvb
            line = 0
            for n in range(split):
                if self._spi_init:  # A callback was passed
                    self._spi_init(self._spi)  # Bus may be shared
                self._dc(0)
                self._cs(0)
                self._spi.write(b'\x3c' if n else b'\x2c')  # RAMWR/Write memory continue
                self._dc(1)
                for start in range(wd * line, wd * (line + lines), wd):
                    _lcopy(lb, buf[start :], clut, wd)  # Copy and map colors
                    self._spi.write(lb)
                line += lines
                self._cs(1)
                await asyncio.sleep(0)