kopia lustrzana https://github.com/peterhinch/micropython-nano-gui
Update DRIVERS.md, add support for Waveshare Pico LCD 1.14
rodzic
b5d62a64c5
commit
f0619a8e19
14
DRIVERS.md
14
DRIVERS.md
|
@ -392,6 +392,11 @@ The driver also supports the
|
|||
[TTGO T-Display](http://www.lilygo.cn/claprod_view.aspx?TypeId=62&Id=1274).
|
||||
This is an inexpensive ESP32 with a 135x240 color TFT display.
|
||||
|
||||
Also, in landscape mode only, the
|
||||
[Waveshare Pico LCD 1.14 inch](https://www.waveshare.com/pico-lcd-1.14.htm).
|
||||
This has a hardware quirk, copy `setup_examples/st7789_pico_lcd_114.py` to
|
||||
your setup file.
|
||||
|
||||
The `color_setup.py` file should initialise the SPI bus with a baudrate of
|
||||
30_000_000. Args `polarity`, `phase`, `bits`, `firstbit` are defaults. Hard or
|
||||
soft SPI may be used but hard may be faster. 30MHz is a conservative value: see
|
||||
|
@ -1042,6 +1047,15 @@ method:
|
|||
This ensures compatibility with code written for color displays by converting
|
||||
RGB values to a single bit.
|
||||
|
||||
For color display drivers some boilerplate code is required for rendering
|
||||
monochrome objects such as glyphs:
|
||||
```python
|
||||
from drivers.boolpalette import BoolPalette
|
||||
# In the constructor:
|
||||
mode = framebuf.GS8 # Whatever mode the driver uses
|
||||
self.palette = BoolPalette(mode)
|
||||
super().__init__(buf, self.width, self.height, mode)
|
||||
```
|
||||
Refresh must be handled by a `show` method taking no arguments; when called,
|
||||
the contents of the buffer underlying the `FrameBuffer` must be copied to the
|
||||
hardware.
|
||||
|
|
|
@ -0,0 +1,25 @@
|
|||
# hardware_setup.py Customise for your hardware config
|
||||
|
||||
# Released under the MIT License (MIT). See LICENSE.
|
||||
# Copyright (c) 2021 Peter Hinch, Ihor Nehrutsa
|
||||
|
||||
# Supports:
|
||||
# Waveshare Pico LCD 1.14" 135*240(Pixel) based on ST7789V
|
||||
# https://www.waveshare.com/wiki/Pico-LCD-1.14
|
||||
# https://www.waveshare.com/pico-lcd-1.14.htm
|
||||
|
||||
from machine import Pin, SPI
|
||||
import gc
|
||||
|
||||
from drivers.st7789.st7789_4bit import *
|
||||
SSD = ST7789
|
||||
|
||||
gc.collect() # Precaution before instantiating framebuf
|
||||
# Conservative low baudrate. Can go to 62.5MHz.
|
||||
spi = SPI(1, 30_000_000, sck=Pin(10), mosi=Pin(11), miso=None)
|
||||
pcs = Pin(9, Pin.OUT, value=1)
|
||||
prst = Pin(12, Pin.OUT, value=1)
|
||||
pbl = Pin(13, Pin.OUT, value=1)
|
||||
pdc = Pin(8, Pin.OUT, value=0)
|
||||
|
||||
ssd = SSD(spi, height=135, width=240, dc=pdc, cs=pcs, rst=prst, disp_mode=LANDSCAPE, display=TDISPLAY)
|
Ładowanie…
Reference in New Issue