ssd7789.py bugs fixed.

DRIVERS.md

@@ -377,7 +377,7 @@ The response may be of interest.
 ## 3.3 Drivers for ST7789
 
 **UNDER DEVELOPMENT**  
-Works on Adafruit display in landscape mode. Anything else is dubious. 
+Initial testing on Adafruit display looks good. 
 
 These displays tend to be physically small with a high pixel density. The chip
 supports up to 240x320 displays. The Adafruit units tested are 240x240. To keep
@@ -443,12 +443,11 @@ gc.collect()  # Precaution before instantiating framebuf
 spi = SPI(1, 30_000_000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
 ssd = SSD(spi, dc=pdc, cs=pcs, rst=prst, disp_mode=PORTRAIT | REFLECT)
 ```
-On Adafruit displays, valid combinations are:
+On Adafruit displays, combinations that don't produce mirror images are:
  1. No arg: landscape mode.
  2. `USD | REFLECT` Upside down landscape mode (rotate 180°).
- 3. `PORTRAIT | REFLECT` Portrait mode (rotate 90°).
+ 3. `PORTRAIT | REFLECT` Portrait mode (rotate 90° CCW).
- 4. `PORTRAIT | USD | REFLECT` Upside down portrait (rotate 270°).
+ 4. `PORTRAIT | USD` Upside down portrait (rotate 90° CW).
- **DOES NOT YET WORK**
 
 ###### [Contents](./DRIVERS.md#contents)
 

color_setup/ssd7789.py

@@ -0,0 +1,40 @@
+# color_setup.py Customise for your hardware config
+
+# Released under the MIT License (MIT). See LICENSE.
+# Copyright (c) 2021 Peter Hinch
+
+# As written, supports:
+# Adafruit 1.3" and 1.54" 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789
+# https://www.adafruit.com/product/4313
+# https://www.adafruit.com/product/3787
+
+# Demo of initialisation procedure designed to minimise risk of memory fail
+# when instantiating the frame buffer. The aim is to do this as early as
+# possible before importing other modules.
+
+# WIRING (Adafruit pin nos and names).
+# Pico  SSD
+# VBUS  Vin
+# Gnd   Gnd
+# 13    D/C
+# 14    TCS
+# 15    RST
+# 10    SCK
+# 11    SI MOSI
+
+# No connect: Lite, CCS, SO (MISO)
+from machine import Pin, SPI
+import gc
+
+# *** Choose your color display driver here ***
+
+from drivers.st7789.st7789_4bit import ST7789 as SSD, PORTRAIT, USD
+
+pdc = Pin(13, Pin.OUT, value=0)  # Arbitrary pins
+pcs = Pin(14, Pin.OUT, value=1)
+prst = Pin(15, Pin.OUT, value=1)
+
+gc.collect()  # Precaution before instantiating framebuf
+spi = SPI(1, 60_000_000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
+ssd = SSD(spi, dc=pdc, cs=pcs, rst=prst)  #, disp_mode=PORTRAIT | USD)
+

drivers/st7789/st7789_4bit.py

@@ -62,7 +62,8 @@ class ST7789(framebuf.FrameBuffer):
         return ((b & 0xf8) << 5 | (g & 0x1c) << 11 | (g & 0xe0) >> 5 | (r & 0xf8)) ^ 0xffff
 
     # rst and cs are active low, SPI is mode 0
-    def __init__(self, spi, cs, dc, rst, height=240, width=240, disp_mode=PORTRAIT | REFLECT, init_spi=False):
+    # TEST height=140, width=200, disp_mode=PORTRAIT|REFLECT
+    def __init__(self, spi, cs, dc, rst, height=240, width=240, disp_mode=0, init_spi=False):
         self._spi = spi  # Clock cycle time for write 16ns 62.5MHz max (read is 150ns)
         self._rst = rst  # Pins
         self._dc = dc
@@ -123,28 +124,51 @@ class ST7789(framebuf.FrameBuffer):
         cmd(b'\x20') # INVOFF Adafruit turn inversion on. This driver fixes .rgb
         cmd(b'\x13')  # NORON Normal display mode
 
-        # Adafruit skip setting CA and RA but using it may help portability
+        # Adafruit skip setting CA and RA. We do it to enable rotation and
-        # CASET column address. start=0, end=width
+        # reflection. Also hopefully to help portability. Set display window
-        if (disp_mode & USD) and (disp_mode & PORTRAIT):
+        # depending on mode, .height and .width.
-            wcd(b'\x2b', int.to_bytes(240 - self.width, 2, 'big') + int.to_bytes(239, 2, 'big'))
+        self.set_window(disp_mode)
-        else:
-            wcd(b'\x2a', int.to_bytes(self.width - 1, 4, 'big'))
-        # RASET row addr. start=0, end=height
-        if (disp_mode & USD) and not (disp_mode & PORTRAIT):
-            wcd(b'\x2b', int.to_bytes(320 - self.height, 2, 'big') + int.to_bytes(319, 2, 'big'))
-        else:
-            wcd(b'\x2b', int.to_bytes(self.height - 1, 4, 'big'))
-
         # d7..d5 of MADCTL determine rotation/orientation datasheet P124, P231
         # d7 = MY page addr order
         # d6 = MX col addr order
         # d5 = MV row/col exchange
         wcd(b'\x36', int.to_bytes(disp_mode, 1, 'little'))
         cmd(b'\x29')  # DISPON
-        #sleep_ms(500)  # Adafruit. Seems unnecessary. No mention in datasheet.
+
+    # Define the mapping between RAM and the display
+    # May need modifying for non-Adafruit hardware which may use a different
+    # mapping between chip RAM and LCD. Datasheet section 8.12 p124.
+    def set_window(self, mode):
+        rht = 320
+        rwd = 240  # RAM ht and width
+        wht = self.height
+        wwd = self.width  # Window dimensions
+        # Determine x and y start and end. Defaults for LANDSCAPE and PORTRAIT
+        ys = 0  # y start
+        ye = wht - 1  # y end
+        xs = 0
+        xe = wwd - 1
+        if mode & PORTRAIT:
+            if mode & REFLECT:
+                ys = rwd - wht
+                ye = rwd - 1
+            if mode & USD:
+                xs = rht - wwd
+                xe = rht - 1
+        else:  # LANDSCAPE
+            if mode & REFLECT:
+                xs = rwd - wht
+                xe = rwd - 1
+            if mode & USD:
+                ys = rht - wwd
+                ye = rht - 1
+        # Col address set
+        self._wcd(b'\x2a', int.to_bytes(xs, 2, 'big') + int.to_bytes(xe, 2, 'big'))
+        # Row address set
+        self._wcd(b'\x2b', int.to_bytes(ys, 2, 'big') + int.to_bytes(ye, 2, 'big'))
 
     def show(self):  # Blocks for 83ms @60MHz SPI
-        ts = ticks_us()
+#        ts = ticks_us()
         clut = ST7789.lut
         wd = self.width // 2
         end = self.height * wd
@@ -160,4 +184,4 @@ class ST7789(framebuf.FrameBuffer):
             _lcopy(lb, buf[start :], clut, wd)  # Copy and map colors
             self._spi.write(lb)
         self._cs(1)
-        print(ticks_diff(ticks_us(), ts))
+#        print(ticks_diff(ticks_us(), ts))