Fix fplot.py import statement.

drivers/st7735r/st7735r.py

@@ -3,11 +3,9 @@
 # Released under the MIT License (MIT). See LICENSE.
 # Copyright (c) 2018-2020 Peter Hinch
 
-# Supported displays
+# Supported display
 # Adfruit 1.8' Color TFT LCD display with MicroSD Card Breakout:
 # https://www.adafruit.com/product/358
-# Adafruit 1.44' Color TFT LCD Display with MicroSD Card breakout:
-# https://www.adafruit.com/product/2088
 
 # Based on
 # https://github.com/adafruit/Adafruit_CircuitPython_ST7735R/blob/master/adafruit_st7735r.py
@@ -50,20 +48,20 @@ class ST7735R(framebuf.FrameBuffer):
         return (r & 0xe0) | ((g >> 3) & 0x1c) | (b >> 6)
 
     # rst and cs are active low, SPI is mode 0
-    def __init__(self, spi, cs, dc, rst, height=128, width=128):
+    def __init__(self, spi, cs, dc, rst):
         self._spi = spi
         self._rst = rst  # Pins
         self._dc = dc
         self._cs = cs
-        self.height = height  # Required by Writer class
-        self.width = width
+        self.height = 128  # Required by Writer class
+        self.width = 160
         # Save color mode for use by writer_gui (blit)
         self.mode = framebuf.GS8  # Use 8bit greyscale for 8 bit color.
         gc.collect()
-        self.buffer = bytearray(self.height * self.width)
+        self.buffer = bytearray(128 * 160)
         self._mvb = memoryview(self.buffer)
-        super().__init__(self.buffer, self.width, self.height, self.mode)
-        self._linebuf = bytearray(int(self.width * 3 // 2))  # 12 bit color out
+        super().__init__(self.buffer, 160, 128, self.mode)
+        self._linebuf = bytearray(int(160 * 3 // 2))  # 12 bit color out
         self._init()
         self.show()
 
@@ -123,8 +121,8 @@ class ST7735R(framebuf.FrameBuffer):
         wcd(b'\xe0', b'\x02\x1c\x07\x12\x37\x32\x29\x2d\x29\x25\x2B\x39\x00\x01\x03\x10')  # GMCTRP1 Gamma
         wcd(b'\xe1', b'\x03\x1d\x07\x06\x2E\x2C\x29\x2D\x2E\x2E\x37\x3F\x00\x00\x02\x10')  # GMCTRN1
 
-        wcd(b'\x2a', int.to_bytes(self.width, 4, 'big'))  # CASET column address 0 start, 160/128 end
-        wcd(b'\x2b', int.to_bytes(self.height, 4, 'big'))  # RASET
+        wcd(b'\x2a', int.to_bytes(160, 4, 'big'))  # CASET column address 0 start, 160 end
+        wcd(b'\x2b', int.to_bytes(128, 4, 'big'))  # RASET
 
         cmd(b'\x13')  # NORON
         sleep_ms(10)
@@ -132,8 +130,8 @@ class ST7735R(framebuf.FrameBuffer):
         sleep_ms(100)
 
     def show(self):  # Blocks 36ms on Pyboard D at stock frequency (160*128)
-        wd = self.width
-        ht = self.height
+        wd = 160
+        ht = 128
         lb = self._linebuf
         buf = self._mvb
         self._dc(0)

gui/core/fplot.py

@@ -23,7 +23,7 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 # THE SOFTWARE.
 
-from nanogui import DObject, circle
+from gui.core.nanogui import DObject, circle
 from cmath import rect, pi
 from micropython import const
 from array import array

st7735r_setup.py

@@ -6,8 +6,6 @@
 # As written, supports:
 # Adfruit 1.8' Color TFT LCD display with MicroSD Card Breakout:
 # https://www.adafruit.com/product/358
-# Adafruit 1.44' Color TFT LCD Display with MicroSD Card breakout:
-# https://www.adafruit.com/product/2088
 
 # Demo of initialisation procedure designed to minimise risk of memory fail
 # when instantiating the frame buffer. The aim is to do this as early as
@@ -29,11 +27,11 @@ import gc
 from drivers.st7735r.st7735r import ST7735R as SSD
 
 height = 128
-width = 128
+width = 160
 
 pdc = machine.Pin('Y1', machine.Pin.OUT_PP, value=0)
 pcs = machine.Pin('Y2', machine.Pin.OUT_PP, value=1)
 prst = machine.Pin('Y3', machine.Pin.OUT_PP, value=1)
 spi = machine.SPI(2, baudrate=12_000_000)
 gc.collect()  # Precaution before instantiating framebuf
-ssd = SSD(spi, pcs, pdc, prst, height, width)  # Create a display instance
+ssd = SSD(spi, pcs, pdc, prst)  # Create a display instance