kopia lustrzana https://github.com/peterhinch/micropython-micro-gui
Improved setup example pico_lcd_114.py
rodzic
510d24d996
commit
5ed42f918d
|
@ -10,10 +10,11 @@
|
||||||
|
|
||||||
from machine import Pin, SPI
|
from machine import Pin, SPI
|
||||||
import gc
|
import gc
|
||||||
|
|
||||||
from drivers.st7789.st7789_4bit import *
|
from drivers.st7789.st7789_4bit import *
|
||||||
SSD = ST7789
|
SSD = ST7789
|
||||||
|
|
||||||
|
mode = LANDSCAPE # Options PORTRAIT, USD, REFLECT combined with |
|
||||||
|
|
||||||
gc.collect() # Precaution before instantiating framebuf
|
gc.collect() # Precaution before instantiating framebuf
|
||||||
# Conservative low baudrate. Can go to 62.5MHz.
|
# Conservative low baudrate. Can go to 62.5MHz.
|
||||||
spi = SPI(1, 30_000_000, sck=Pin(10), mosi=Pin(11), miso=None)
|
spi = SPI(1, 30_000_000, sck=Pin(10), mosi=Pin(11), miso=None)
|
||||||
|
@ -22,14 +23,18 @@ prst = Pin(12, Pin.OUT, value=1)
|
||||||
pbl = Pin(13, Pin.OUT, value=1)
|
pbl = Pin(13, Pin.OUT, value=1)
|
||||||
pdc = Pin(8, Pin.OUT, value=0)
|
pdc = Pin(8, Pin.OUT, value=0)
|
||||||
|
|
||||||
ssd = SSD(spi, height=135, width=240, dc=pdc, cs=pcs, rst=prst, disp_mode=LANDSCAPE, display=TDISPLAY)
|
portrait = mode & PORTRAIT
|
||||||
|
ht, wd = (240, 135) if portrait else (135, 240)
|
||||||
|
ssd = SSD(spi, height=ht, width=wd, dc=pdc, cs=pcs, rst=prst, disp_mode=mode, display=TDISPLAY)
|
||||||
|
|
||||||
# Create and export a Display instance
|
# Create and export a Display instance
|
||||||
from gui.core.ugui import Display
|
from gui.core.ugui import Display
|
||||||
# Define control buttons
|
# Define control buttons: adjust joystick orientation to match display
|
||||||
nxt = Pin(20, Pin.IN, Pin.PULL_UP) # Move to next control
|
# Orientation is only correct for basic LANDSCAPE and PORTRAIT modes
|
||||||
|
pnxt, pprev, pin, pdec = (2, 18, 16, 20) if portrait else (20, 16, 2, 18)
|
||||||
|
nxt = Pin(pnxt, Pin.IN, Pin.PULL_UP) # Move to next control
|
||||||
sel = Pin(3, Pin.IN, Pin.PULL_UP) # Operate current control
|
sel = Pin(3, Pin.IN, Pin.PULL_UP) # Operate current control
|
||||||
prev = Pin(16, Pin.IN, Pin.PULL_UP) # Move to previous control
|
prev = Pin(pprev, Pin.IN, Pin.PULL_UP) # Move to previous control
|
||||||
increase = Pin(2, Pin.IN, Pin.PULL_UP) # Increase control's value
|
increase = Pin(pin, Pin.IN, Pin.PULL_UP) # Increase control's value
|
||||||
decrease = Pin(18, Pin.IN, Pin.PULL_UP) # Decrease control's value
|
decrease = Pin(pdec, Pin.IN, Pin.PULL_UP) # Decrease control's value
|
||||||
display = Display(ssd, nxt, sel, prev, increase, decrease)
|
display = Display(ssd, nxt, sel, prev, increase, decrease)
|
||||||
|
|
Ładowanie…
Reference in New Issue