kopia lustrzana https://github.com/peterhinch/micropython-micro-gui
ST7789: Add support for Waveshare 1.3inch LCD
rodzic
8197d30de2
commit
2f9925f232
|
@ -8,7 +8,7 @@
|
||||||
# https://www.adafruit.com/product/4313
|
# https://www.adafruit.com/product/4313
|
||||||
# TTGO T-Display
|
# TTGO T-Display
|
||||||
# http://www.lilygo.cn/prod_view.aspx?TypeId=50044&Id=1126
|
# http://www.lilygo.cn/prod_view.aspx?TypeId=50044&Id=1126
|
||||||
|
|
||||||
# Based on
|
# Based on
|
||||||
# Adfruit https://github.com/adafruit/Adafruit_CircuitPython_ST7789/blob/master/adafruit_st7789.py
|
# Adfruit https://github.com/adafruit/Adafruit_CircuitPython_ST7789/blob/master/adafruit_st7789.py
|
||||||
# Also see st7735r_4bit.py for other source acknowledgements
|
# Also see st7735r_4bit.py for other source acknowledgements
|
||||||
|
@ -16,7 +16,7 @@
|
||||||
# SPI bus: default mode. Driver performs no read cycles.
|
# SPI bus: default mode. Driver performs no read cycles.
|
||||||
# Datasheet table 6 p44 scl write cycle 16ns == 62.5MHz
|
# Datasheet table 6 p44 scl write cycle 16ns == 62.5MHz
|
||||||
|
|
||||||
from time import sleep_ms #, ticks_us, ticks_diff
|
from time import sleep_ms # , ticks_us, ticks_diff
|
||||||
import framebuf
|
import framebuf
|
||||||
import gc
|
import gc
|
||||||
import micropython
|
import micropython
|
||||||
|
@ -32,19 +32,22 @@ PORTRAIT = 4
|
||||||
GENERIC = (0, 0, 0)
|
GENERIC = (0, 0, 0)
|
||||||
TDISPLAY = (52, 40, 1)
|
TDISPLAY = (52, 40, 1)
|
||||||
PI_PICO_LCD_2 = (0, 0, 1) # Waveshare Pico LCD 2 determined by Mike Wilson.
|
PI_PICO_LCD_2 = (0, 0, 1) # Waveshare Pico LCD 2 determined by Mike Wilson.
|
||||||
DFR0995 = (34, 0, 0) # DFR0995 Contributed by @EdgarKluge
|
DFR0995 = (34, 0, 0) # DFR0995 Contributed by @EdgarKluge
|
||||||
|
WAVESHARE_13 = (0, 0, 16) # Waveshare 1.3" 240x240 LCD contributed by Aaron Mittelmeier
|
||||||
|
|
||||||
|
|
||||||
@micropython.viper
|
@micropython.viper
|
||||||
def _lcopy(dest:ptr16, source:ptr8, lut:ptr16, length:int):
|
def _lcopy(dest: ptr16, source: ptr8, lut: ptr16, length: int):
|
||||||
# rgb565 - 16bit/pixel
|
# rgb565 - 16bit/pixel
|
||||||
n = 0
|
n = 0
|
||||||
for x in range(length):
|
for x in range(length):
|
||||||
c = source[x]
|
c = source[x]
|
||||||
dest[n] = lut[c >> 4] # current pixel
|
dest[n] = lut[c >> 4] # current pixel
|
||||||
n += 1
|
n += 1
|
||||||
dest[n] = lut[c & 0x0f] # next pixel
|
dest[n] = lut[c & 0x0F] # next pixel
|
||||||
n += 1
|
n += 1
|
||||||
|
|
||||||
|
|
||||||
class ST7789(framebuf.FrameBuffer):
|
class ST7789(framebuf.FrameBuffer):
|
||||||
|
|
||||||
lut = bytearray(0xFF for _ in range(32)) # set all colors to BLACK
|
lut = bytearray(0xFF for _ in range(32)) # set all colors to BLACK
|
||||||
|
@ -55,13 +58,23 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
# For some reason color must be inverted on this controller.
|
# For some reason color must be inverted on this controller.
|
||||||
@staticmethod
|
@staticmethod
|
||||||
def rgb(r, g, b):
|
def rgb(r, g, b):
|
||||||
return ((b & 0xf8) << 5 | (g & 0x1c) << 11 | (g & 0xe0) >> 5 | (r & 0xf8)) ^ 0xffff
|
return ((b & 0xF8) << 5 | (g & 0x1C) << 11 | (g & 0xE0) >> 5 | (r & 0xF8)) ^ 0xFFFF
|
||||||
|
|
||||||
# rst and cs are active low, SPI is mode 0
|
# rst and cs are active low, SPI is mode 0
|
||||||
def __init__(self, spi, cs, dc, rst, height=240, width=240,
|
def __init__(
|
||||||
disp_mode=LANDSCAPE, init_spi=False, display=GENERIC):
|
self,
|
||||||
|
spi,
|
||||||
|
cs,
|
||||||
|
dc,
|
||||||
|
rst,
|
||||||
|
height=240,
|
||||||
|
width=240,
|
||||||
|
disp_mode=LANDSCAPE,
|
||||||
|
init_spi=False,
|
||||||
|
display=GENERIC,
|
||||||
|
):
|
||||||
if not 0 <= disp_mode <= 7:
|
if not 0 <= disp_mode <= 7:
|
||||||
raise ValueError('Invalid display mode:', disp_mode)
|
raise ValueError("Invalid display mode:", disp_mode)
|
||||||
if not display in (GENERIC, TDISPLAY, PI_PICO_LCD_2):
|
if not display in (GENERIC, TDISPLAY, PI_PICO_LCD_2):
|
||||||
print("WARNING: unsupported display parameter value.")
|
print("WARNING: unsupported display parameter value.")
|
||||||
self._spi = spi # Clock cycle time for write 16ns 62.5MHz max (read is 150ns)
|
self._spi = spi # Clock cycle time for write 16ns 62.5MHz max (read is 150ns)
|
||||||
|
@ -121,16 +134,16 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
self._spi_init(self._spi) # Bus may be shared
|
self._spi_init(self._spi) # Bus may be shared
|
||||||
cmd = self._wcmd
|
cmd = self._wcmd
|
||||||
wcd = self._wcd
|
wcd = self._wcd
|
||||||
cmd(b'\x01') # SW reset datasheet specifies 120ms before SLPOUT
|
cmd(b"\x01") # SW reset datasheet specifies 120ms before SLPOUT
|
||||||
sleep_ms(150)
|
sleep_ms(150)
|
||||||
cmd(b'\x11') # SLPOUT: exit sleep mode
|
cmd(b"\x11") # SLPOUT: exit sleep mode
|
||||||
sleep_ms(10) # Adafruit delay 500ms (datsheet 5ms)
|
sleep_ms(10) # Adafruit delay 500ms (datsheet 5ms)
|
||||||
wcd(b'\x3a', b'\x55') # _COLMOD 16 bit/pixel, 65Kbit color space
|
wcd(b"\x3a", b"\x55") # _COLMOD 16 bit/pixel, 65Kbit color space
|
||||||
cmd(b'\x20') # INVOFF Adafruit turn inversion on. This driver fixes .rgb
|
cmd(b"\x20") # INVOFF Adafruit turn inversion on. This driver fixes .rgb
|
||||||
cmd(b'\x13') # NORON Normal display mode
|
cmd(b"\x13") # NORON Normal display mode
|
||||||
|
|
||||||
# Table maps user request onto hardware values. index values:
|
# Table maps user request onto hardware values. index values:
|
||||||
# 0 Normal
|
# 0 Normal
|
||||||
# 1 Reflect
|
# 1 Reflect
|
||||||
# 2 USD
|
# 2 USD
|
||||||
# 3 USD reflect
|
# 3 USD reflect
|
||||||
|
@ -146,11 +159,11 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
# PORTRAIT = 0x20
|
# PORTRAIT = 0x20
|
||||||
# REFLECT = 0x40
|
# REFLECT = 0x40
|
||||||
# USD = 0x80
|
# USD = 0x80
|
||||||
mode = (0x60, 0xe0, 0xa0, 0x20, 0, 0x40, 0xc0, 0x80)[user_mode]
|
mode = (0x60, 0xE0, 0xA0, 0x20, 0, 0x40, 0xC0, 0x80)[user_mode]
|
||||||
# Set display window depending on mode, .height and .width.
|
# Set display window depending on mode, .height and .width.
|
||||||
self.set_window(mode)
|
self.set_window(mode)
|
||||||
wcd(b'\x36', int.to_bytes(mode, 1, 'little'))
|
wcd(b"\x36", int.to_bytes(mode, 1, "little"))
|
||||||
cmd(b'\x29') # DISPON. Adafruit then delay 500ms.
|
cmd(b"\x29") # DISPON. Adafruit then delay 500ms.
|
||||||
|
|
||||||
# Define the mapping between RAM and the display.
|
# Define the mapping between RAM and the display.
|
||||||
# Datasheet section 8.12 p124.
|
# Datasheet section 8.12 p124.
|
||||||
|
@ -166,7 +179,7 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
xs = xoff
|
xs = xoff
|
||||||
xe = wwd + xoff - 1
|
xe = wwd + xoff - 1
|
||||||
ys = yoff # y start
|
ys = yoff # y start
|
||||||
ye = wht + yoff - 1 # y end
|
ye = wht + yoff - 1 # y end
|
||||||
if mode & reflect:
|
if mode & reflect:
|
||||||
ys = rwd - wht - yoff
|
ys = rwd - wht - yoff
|
||||||
ye = rwd - yoff - 1
|
ye = rwd - yoff - 1
|
||||||
|
@ -179,7 +192,7 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
xs = xoff
|
xs = xoff
|
||||||
xe = wwd + xoff - 1
|
xe = wwd + xoff - 1
|
||||||
ys = yoff # y start
|
ys = yoff # y start
|
||||||
ye = wht + yoff - 1 # y end
|
ye = wht + yoff - 1 # y end
|
||||||
if mode & usd:
|
if mode & usd:
|
||||||
ys = rht - wht - yoff
|
ys = rht - wht - yoff
|
||||||
ye = rht - yoff - 1
|
ye = rht - yoff - 1
|
||||||
|
@ -188,15 +201,15 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
xe = rwd - xoff - 1
|
xe = rwd - xoff - 1
|
||||||
|
|
||||||
# Col address set.
|
# Col address set.
|
||||||
self._wcd(b'\x2a', int.to_bytes((xs << 16) + xe, 4, 'big'))
|
self._wcd(b"\x2a", int.to_bytes((xs << 16) + xe, 4, "big"))
|
||||||
# Row address set
|
# Row address set
|
||||||
self._wcd(b'\x2b', int.to_bytes((ys << 16) + ye, 4, 'big'))
|
self._wcd(b"\x2b", int.to_bytes((ys << 16) + ye, 4, "big"))
|
||||||
|
|
||||||
#@micropython.native # Made virtually no difference to timing.
|
# @micropython.native # Made virtually no difference to timing.
|
||||||
def show(self): # Blocks for 83ms @60MHz SPI
|
def show(self): # Blocks for 83ms @60MHz SPI
|
||||||
# Blocks for 60ms @30MHz SPI on TTGO in PORTRAIT mode
|
# Blocks for 60ms @30MHz SPI on TTGO in PORTRAIT mode
|
||||||
# Blocks for 46ms @30MHz SPI on TTGO in LANDSCAPE mode
|
# Blocks for 46ms @30MHz SPI on TTGO in LANDSCAPE mode
|
||||||
#ts = ticks_us()
|
# ts = ticks_us()
|
||||||
clut = ST7789.lut
|
clut = ST7789.lut
|
||||||
wd = -(-self.width // 2) # Ceiling division for odd number widths
|
wd = -(-self.width // 2) # Ceiling division for odd number widths
|
||||||
end = self.height * wd
|
end = self.height * wd
|
||||||
|
@ -206,20 +219,20 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
self._spi_init(self._spi) # Bus may be shared
|
self._spi_init(self._spi) # Bus may be shared
|
||||||
self._dc(0)
|
self._dc(0)
|
||||||
self._cs(0)
|
self._cs(0)
|
||||||
self._spi.write(b'\x2c') # RAMWR
|
self._spi.write(b"\x2c") # RAMWR
|
||||||
self._dc(1)
|
self._dc(1)
|
||||||
for start in range(0, end, wd):
|
for start in range(0, end, wd):
|
||||||
_lcopy(lb, buf[start:], clut, wd) # Copy and map colors
|
_lcopy(lb, buf[start:], clut, wd) # Copy and map colors
|
||||||
self._spi.write(lb)
|
self._spi.write(lb)
|
||||||
self._cs(1)
|
self._cs(1)
|
||||||
#print(ticks_diff(ticks_us(), ts))
|
# print(ticks_diff(ticks_us(), ts))
|
||||||
|
|
||||||
# Asynchronous refresh with support for reducing blocking time.
|
# Asynchronous refresh with support for reducing blocking time.
|
||||||
async def do_refresh(self, split=5):
|
async def do_refresh(self, split=5):
|
||||||
async with self._lock:
|
async with self._lock:
|
||||||
lines, mod = divmod(self.height, split) # Lines per segment
|
lines, mod = divmod(self.height, split) # Lines per segment
|
||||||
if mod:
|
if mod:
|
||||||
raise ValueError('Invalid do_refresh arg.')
|
raise ValueError("Invalid do_refresh arg.")
|
||||||
clut = ST7789.lut
|
clut = ST7789.lut
|
||||||
wd = -(-self.width // 2)
|
wd = -(-self.width // 2)
|
||||||
lb = memoryview(self._linebuf)
|
lb = memoryview(self._linebuf)
|
||||||
|
@ -230,10 +243,10 @@ class ST7789(framebuf.FrameBuffer):
|
||||||
self._spi_init(self._spi) # Bus may be shared
|
self._spi_init(self._spi) # Bus may be shared
|
||||||
self._dc(0)
|
self._dc(0)
|
||||||
self._cs(0)
|
self._cs(0)
|
||||||
self._spi.write(b'\x3c' if n else b'\x2c') # RAMWR/Write memory continue
|
self._spi.write(b"\x3c" if n else b"\x2c") # RAMWR/Write memory continue
|
||||||
self._dc(1)
|
self._dc(1)
|
||||||
for start in range(wd * line, wd * (line + lines), wd):
|
for start in range(wd * line, wd * (line + lines), wd):
|
||||||
_lcopy(lb, buf[start :], clut, wd) # Copy and map colors
|
_lcopy(lb, buf[start:], clut, wd) # Copy and map colors
|
||||||
self._spi.write(lb)
|
self._spi.write(lb)
|
||||||
line += lines
|
line += lines
|
||||||
self._cs(1)
|
self._cs(1)
|
||||||
|
|
Ładowanie…
Reference in New Issue