mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
7 719 Commity
24 Gałęzie
269 Tagi
4,2 GiB
Wykres commitów

548 Commity (cd60ee80bdd0f6ab73f3ce9b26ce251819c8b9a4)

Autor SHA1 Wiadomość Data
andrekir c9686d2f62 remove `PIN_EINK_EN` from RAK4631 variants 2023-03-12 19:29:12 +01:00
Andre K 634251834f fix rak4631_epaper PIN_EINK_EN 
revert 088ab106dd
 2023-03-12 19:29:12 +01:00
Ben Meadors e737a22120
Platform updates (#2340) 
* 6.1.0

* Update libs

* Update nrf52 while we're at it

* Remove temporary heltec platform packages

* Update install scripts to flash s3 ota partition bin
 2023-03-09 12:45:38 -06:00
A. Rager e6d69e2b67
Refactor i2cScan.h To Handle 2 Bus (#2337) 
* Break i2cScan out into a set of classes for scanning i2c

* refactor i2cscan addresses to be structs that allow addressing by port + address

* build whoopsies

* trunk fmt

* trunk fmt

* lost some build fixes from the merge

* more cleaning for build safety, RTC behavior
 2023-03-08 21:13:46 -06:00
Thomas Göttgens 267db05d69 - G1 Explorer use correct display controller 
- adhere UA font in modules
 2023-03-08 17:12:25 +01:00
Thomas Göttgens 4a0dfb5401 T3S3-1.1 SX1276 config (and cosmetic change for SX1280 in PA mode) 2023-03-04 18:39:19 +01:00
Thomas Göttgens 498964e04e
Merge branch 'master' into raspi-portduino 2023-03-04 17:24:37 +01:00
A. Rager 214feb1f21
Add Hardware: BetaFPV 900 Nano TX (#2249) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-03-01 08:36:25 -06:00
Manuel 9008c75517
Fixed: Tlora-t3s3-v1 SX1262 firmware reboots continuously (#2308) (#2315) 2023-02-28 07:45:10 -06:00
Thomas Göttgens 7d0bea267a
Merge branch 'master' into raspi-portduino 2023-02-22 10:08:20 +01:00
GUVWAF 95bbcd2cb7
Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290) 
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again

* Remove setStandby in startSend
Already done in isChannelActive()

* Set LORA_DIO1 as RadioLib GPIO for SX127x

* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now

* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-02-20 07:40:44 -06:00
neil b33632f21a 'nano-g1-explorer' 2023-02-18 04:49:37 +08:00
Thomas Göttgens ed1aa9ddb0
Merge branch 'master' into raspi-portduino 2023-02-17 12:34:00 +01:00
Ben Meadors 09f2ea8938 Portduino isn't extra. It's extra special 2023-02-10 07:47:43 -06:00
Thomas Göttgens 83e309f3bf label boards as secondary to split the core firmware archive by support level. 
Ref: https://docs.platformio.org/en/latest/scripting/examples/platformio_ini_custom_options.html
 2023-02-10 01:35:25 +01:00
GUVWAF a5b99ee5d5 Try other location 2023-02-07 20:05:40 +01:00
GUVWAF 4a0c341438 Make Portduino build again 2023-02-07 19:40:15 +01:00
Ben Meadors 9522d4d2f5 Make a pie? 2023-02-07 07:17:32 -06:00
Thomas Göttgens 472c43aace Merge remote-tracking branch 'remotes/origin/master' into raspi-portduino 2023-02-02 10:49:45 +01:00
Ben Meadors cb3d5a5748 Comment about external PA module boards 2023-01-25 15:48:42 -06:00
Ben Meadors f1fd41a378 Add to Eink target as well 2023-01-25 11:48:11 -06:00
Ben Meadors ca91447c0e For science! 2023-01-25 10:10:09 -06:00
Ben Meadors 2c1b7840c5 Make this pr great again 2023-01-23 09:22:40 +01:00
Thomas Göttgens e9acf413fb After thoroughly reading schematics and documentation, i conclude that this is theoretically the right definition for this hookup. 2023-01-23 09:22:40 +01:00
Ben Meadors 266c61065d I swear I did this before you butthole 2023-01-21 19:51:24 -06:00
Ben Meadors e2e7658789 w/e 2023-01-21 19:24:33 -06:00
Thomas Göttgens 51b2c431d9 trunk roundhouse kick 2023-01-21 21:23:24 +01:00
Ben Meadors 7e27729dae Remove HAS_GPS for WSLv3 2023-01-15 08:24:20 -06:00
Thomas Göttgens 5fd00b2538 - make a template class for API Server 
- Skip a lot of duplicate code
- add a hexDump output - might come in handy
- refactor directory names
- remove unused debugOut that was generating template errors
 2023-01-09 17:03:52 +01:00
Thomas Göttgens 49172e416e
Merge pull request #2108 from markbirss/develop 
Add initial support for BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
 2023-01-07 22:50:04 +01:00
Mark Trevor Birss 4d7402839e
Update platformio.ini 2023-01-07 16:00:27 +02:00
Mark Trevor Birss c98dc4cae0
Update variant.h 2023-01-07 13:48:35 +02:00
Mark Trevor Birss f21212dd3e
Update platformio.ini 2023-01-07 13:23:33 +02:00
Mark Trevor Birss 0e0ccad489
Update variant.h 2023-01-07 13:22:32 +02:00
Mark Trevor Birss 9f1c77da76
Create variant.h 2023-01-07 13:01:14 +02:00
Mark Trevor Birss 7c1c49b8ab
Create platformio.ini 2023-01-07 13:00:50 +02:00
Ben Meadors f4099261df Hydra gps troubleshooting 2023-01-06 15:04:11 -06:00
Thomas Göttgens 8c20fe5ec4 Start working on RF95 attached to Raspberry Pi 2022-12-30 21:44:51 +01:00
Thomas Göttgens 94cb100e3f Master to Develop 2022-12-28 15:30:23 +01:00
Thomas Göttgens e25d05689b Updates to external notification and radiolib for SX128x. Rip out Godmode again for these 2022-12-28 14:57:40 +01:00
Thomas Göttgens 430908f5d6 TLORA_T3_S3 2022-12-28 13:56:56 +01:00
Ben Meadors 28b954017f Copy pasta 2022-12-22 14:55:32 +01:00
Ben Meadors 16d826d6c7 Move to upstream espressif arduino 2022-12-22 14:55:32 +01:00
Thomas Göttgens d566457f0c Merge remote-tracking branch 'remotes/origin/master' into develop 2022-12-18 14:07:20 +01:00
Thomas Göttgens c577e09183
Merge branch 'develop' into gps-toggle-final 2022-12-16 20:58:53 +01:00
Thomas Göttgens 72f1416b30 add variant comment about radiolib 2022-12-16 20:21:56 +01:00
code8buster f2229e6977 Decrease click time window to avoid spurious double press detections while cycling windows quickly, build power toggle by default 2022-12-15 11:08:37 -05:00
Mark Trevor Birss 088ab106dd
Update variant.h 2022-12-14 17:57:02 +02:00
Mark Trevor Birss 110c3f619a
Update variant.h 2022-12-14 17:56:44 +02:00
ghostop14 59ec7f31ab Enable GPS capabilities on heltec V3 2022-12-13 12:31:39 -05:00
Thomas Göttgens 5fbc630061 add IO7 to RAK pinouts - only comments changed 2022-12-11 21:17:46 +01:00
code8buster 911083c49d Adds a flag to turn the GPS power rail off entirely on tbeam 2022-12-04 01:57:00 -05:00
Thomas Göttgens bba6bf387e hopefully fix compilation errors 2022-11-29 14:35:46 +01:00
Thomas Göttgens 4d32f7c5ad WIP: audio module still does not work, but enabled for all regions where audio is permitted. 2022-11-29 11:22:18 +01:00
Thomas Göttgens c7681cb24d update board definition, update copy/paste errors, fix SX1280. 2022-11-27 14:03:50 +01:00
Ben Meadors 47a47f1e69
Merge branch 'master' into develop 2022-11-26 08:18:35 -06:00
Ben Meadors 84a9d95b1f
Merge branch 'master' into MESSAGES 2022-11-26 06:43:52 -06:00
Ihor Nehrutsa 6507683909 Squashed commit of the following: 
commit c8d1bcf04fae5f7ac5b639ddd15a738045014c95
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:11:18 2022 +0200

    Revert "variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS"

    This reverts commit 8d225ced9c.

commit 1c37097448393ea9364c2b9bf10522802c61d5c4
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:04:09 2022 +0200

    Some little debugs added

commit f1b55e11af
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 15:24:58 2022 +0200

    Update variant.h

commit 8d225ced9c
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 13:06:49 2022 +0200

    variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS
 2022-11-25 15:17:24 +02:00
Thomas Göttgens 025d2264a2 m5stack runs with native tone support now. 2022-11-24 10:44:43 +01:00
Thomas Göttgens 5f8267c956 use the buzzer for external notification module 2022-11-24 10:11:42 +01:00
Mark Trevor Birss b3c396683e
Update platformio.ini 2022-11-23 21:25:19 +02:00
Mark Trevor Birss f08874dd37
Update platformio.ini 2022-11-23 21:24:34 +02:00
Mark Trevor Birss 648054da9b
Add files via upload 2022-11-23 21:19:20 +02:00
Ben Meadors 00bc762bf1
Merge branch 'master' into develop 2022-11-21 09:38:46 -06:00
Thomas Göttgens 3b2b0bdc97
fix TLora V1 Boards Display Init 2022-11-21 15:50:47 +01:00
Ben Meadors 53cd6bdf15
Merge branch 'master' into develop 2022-11-21 07:35:46 -06:00
Ben Meadors b23c364fc0 Test it this way 2022-11-15 16:22:53 -06:00
Thomas Göttgens 5bfc58ed64 testing issues with RAK11200/13300 2022-11-15 21:55:27 +01:00
Thomas Göttgens b5ebfa9cc3 Portduino WIP 2022-11-15 07:59:01 +01:00
Thomas Göttgens 79eff42c3c Fix and Break radiolib 2022-11-14 10:53:16 +01:00
Thomas Göttgens 50a301899e start to sort radiolib out. If we have macros, use them! :-) 
Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.
 2022-11-14 09:49:50 +01:00
Ben Meadors 6e856efd0e
Merge branch 'master' into develop 2022-11-13 14:45:48 -06:00
Ben Meadors 8d4c526d16 Add Heltec Wireless Stick Lite V3 support 2022-11-13 13:28:02 -06:00
Ben Meadors 33cd5ce6c1 Cleanup 2022-11-13 09:48:38 -06:00
Ben Meadors f22c2e768e Reorder 2022-11-13 09:47:55 -06:00
Ben Meadors 3d7dea0606 Added support for Heltec V3 2022-11-13 09:45:16 -06:00
Thomas Göttgens 7a67388a97 Merge branch 'master' of github.com:meshtastic/firmware into develop 2022-11-12 14:34:51 +01:00
lewishe dff6eeb90e Merge branch 'master' of https://github.com/lewisxhe/Meshtastic-device 2022-11-12 15:16:54 +08:00
lewishe b68a026627 Update tbeam-s3 variant mapping 2022-11-12 14:39:42 +08:00
Thomas Göttgens a6ea5496b4 Fixed DIO Pin mapping. SX1280 is working 2022-11-10 23:26:31 +01:00
Thomas Göttgens de0954f307 switch to upstream Ethernet lib 2022-11-10 09:35:56 +01:00
Ben Meadors 3562d34555 Remove flag 2022-11-06 18:22:52 +01:00
Ben Meadors 3ca6f645d4 Portduino build flags 2022-11-06 18:22:52 +01:00
Ben Meadors 950d5defda
Master to develop (resolves conflicts) (#1903) 
* Rearranging deck chairs, 900M22S working, 30S not

* We do have wire, just not where it's expected

* Put more of the module specific pins in their blocks

* tryfix compile with NO_SCREEN

* Portduino only: don't continue to try rebooting (#1887)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

* Support for TLORA 2.1-1.8

* Don't allow arbitrary channel name for admin (#1886)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Experimental DIY nrf52840 feather support (#1884)

* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib

* Don't consider Response as ACK for FloodingRouter (#1885)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Fix feather diy (#1892)

* Fix variant

* Fix feather diy target

* [modules][external notifications] allow select channel to listen to

* Fix feather diy pin mapping (#1894)

Thanks to @markbirss

* [create-pull-request] automated change

* Override Screen Autodtect

* Maybe fix crash of this board.

* Fixes reset loop with new espressif32 platform on tlora-v2

 Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.

* Experiment with self hosted action runner

* Fix MQTT on ETH

* revert the tryfix

* Cheating

* Cleanup artifacts older than 1 month

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Delete cleanup_artifacts.yml

* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Update protos

* Update protos

Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
 2022-11-05 09:28:41 -05:00
Thomas Göttgens 09cdc20440 manual merge of changes from Master 2022-11-04 19:56:44 +01:00
Thomas Göttgens 09ddde177c codec2 Audio Support for SX1280 (untested) 2022-11-02 18:23:41 +01:00
Ben Meadors ef18b173cd Experimental DIY nrf52840 feather support (#1884) 
* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib
 2022-11-02 18:19:09 +01:00
Thomas Göttgens 3e82cd7dd4 Support for TLORA 2.1-1.8 2022-11-02 18:19:09 +01:00
code8buster 0ce018cf97 Put more of the module specific pins in their blocks 2022-11-02 18:19:09 +01:00
code8buster 15a8710e69 We do have wire, just not where it's expected 2022-11-02 18:19:09 +01:00
code8buster cae75dcb6d Rearranging deck chairs, 900M22S working, 30S not 2022-11-02 18:19:09 +01:00
code8buster 1f9db0a8fe
Disaster.radio dev board support update (#1873) 
* Bringing changes from 1.2-legacy over to the new structure in 1.3/2.0

* Add meshtastic-dr-dev to CI artifact workflow
 2022-10-29 16:37:27 -05:00
Thomas Göttgens a1256818d9 update library location 2022-10-26 18:25:31 +02:00
Thomas Göttgens a66538fe55 MQTT is working over ethernet 2022-10-26 00:07:02 +02:00
Thomas Göttgens aab52f1e8d Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-23 16:41:04 +02:00
Mykhailo Lesyk 41267a42f7
[rak4630] enable 3.3v periphery before scan for i2c devices (#1847) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-10-22 19:55:34 -05:00
Thomas Göttgens 103c82bc2c only build on vanilla RAK4631 for now. 2022-10-22 16:42:36 +02:00
Thomas Göttgens f3fee5f4fb first murmurs of ethernet support 2022-10-22 16:29:50 +02:00
Ben Meadors 1fc3c0af70
Update variant.h (#1814) 2022-10-17 08:07:18 -05:00
Thomas Göttgens 994e396c00 update Raspberry Pico Framework 2022-10-13 13:57:17 +02:00
Thomas Göttgens d4e65d8607 1.0.1 RTC LIB is released on PIO Registry 2022-10-08 11:09:16 +02:00
Thomas Göttgens 2d4bfe183c Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-07 16:42:29 +02:00
lewis he 004f6fa4d6
Add t-beam-s3-core onboard device support. (#1764) 
* Change t-beam-s3-core pins definitions

* Add t-beam-s3-core power initialization to properly initialize the I2C device

* Add 6-axis and 3-axis sensor detection
 2022-10-07 06:57:55 -05:00
Thomas Göttgens 1d09beb8a7 word wrap long input and fix compiler warnings 2022-10-06 18:40:31 +02:00
Thomas Göttgens 7f935717db
Update platformio.ini 2022-10-06 08:56:02 +02:00
Thomas Göttgens 5b1d3a0c51
Update platformio.ini 2022-10-06 08:55:58 +02:00
andrekir 484f340023 update PCF8563_Library to 1.0.0 2022-10-06 01:05:21 -03:00
Thomas Göttgens 62498d0935 GPS Rollup, incorporates changes from @pmarches and @lewisxhe 2022-10-05 14:59:07 +02:00
Thomas Göttgens b148781e4b
Missed one. 2022-10-04 13:29:06 +02:00
Thomas Göttgens 39a51c7fbb
update lib to make this work 2022-10-04 13:26:20 +02:00
Thomas Göttgens 0fe99595a9 Lib update and fix include errors 2022-10-04 08:59:03 +02:00
Thomas Göttgens b2ff628cec add versioning to all lib depends (compatible upgrade allowed) and move as many as possible off github and into PIO registry. 
Also add a script to check for lib updates (maybe in CI?)
 2022-10-04 08:40:39 +02:00
Thomas Göttgens daf189bf4b Check in variant.h change 2022-09-29 13:23:23 +02:00
Thomas Göttgens d95ec7e6b9 fix TLORA-V2.1-1.6 2022-09-29 13:21:48 +02:00
Ben Meadors ae311c838e
Try to decode mqtt packets first (#1705) 
* Try to decode first

* Remove GPS pins from TLoRAv1 so that it can boot

* Use release version of radio lib

* Use fixed versions of esp framework and tool chain
 2022-09-25 09:39:50 -05:00
Thomas Göttgens 1f96d5d957
Merge branch 'master' into ESPIDF-Rollup 2022-09-19 09:33:50 +02:00
Ben Meadors ad9cc40b97 Increasebaud for local except for RAK11200 2022-09-17 08:25:40 -05:00
Ben Meadors e0d3ac01b0
Merge branch 'master' into ESPIDF-Rollup 2022-09-17 08:22:44 -05:00
Ben Meadors 0f87adad7b
Power state lies and other fixes (#1698) 
* Power interval defaults and factory reset

* Ternary

* Fixes
 2022-09-16 11:00:05 -05:00
Ben Meadors accd23eddc
Factory reset on device state expired (#1695) 2022-09-15 12:15:16 -05:00
Thomas Göttgens eac2613743 make platformio.ini even more modular 2022-09-12 14:02:21 +02:00
Thomas Göttgens e376a3a28e just use the general toolkit 2022-09-12 13:40:20 +02:00
Ben Meadors 7f18c0fb77
Init default intervals (#1688) 
* Init default intervals

* Spacing

* move isrouter check

* Line break

* Oops
 2022-09-10 12:35:36 -05:00
lewis he a9e7a33473
Merge branch 'master' into master 2022-09-06 18:53:22 +08:00
lewishe 5621719eef Add tbeam esp32s3 version support, replace AXP202X_Library with XPowersLIb 2022-09-06 15:58:33 +08:00
Vladislav Osmanov cb3010b58c
OLED Cyrillic Support for v1.3 (#1640) 
* Extended ASCII codes and cyrillic support

(cherry picked from commit e977840805)

* Fixed `ё`, `Ё` letters

(cherry picked from commit 2f4a2ccb2f)

* Fixed `customFontTableLookup` execution flow

(cherry picked from commit 377f909f36)

* [OLED] Specifying the language by defining it in `platformio.ini`

(cherry picked from commit ddd8132b24)

* [OLED] localization guide

(cherry picked from commit a3267c886f)

* [OLED] Cyrillic support

Localization guide has been moved to https://github.com/meshtastic/Meshtastic/tree/master/docs/developers/Firmware

https://meshtastic.org/docs/developers/Firmware/oled-l10n-guide

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-09-04 15:00:10 -05:00
lewis f767fd5075 Modified to be compatible with the new version of sdk, compatible with esp32s3 2022-09-03 23:38:40 +08:00
Neil Hao 70e1a208d5
'snow_screen_hotfix' (#1670) 2022-09-02 19:43:33 -05:00
lewishe 1922034c44 Add t-beam sx1268 support 2022-08-30 11:59:57 +08:00
lewis he 0efa1b25c5
Add t-echo sx1268 support (#1657) 2022-08-29 07:26:17 -05:00
Ben Meadors 1013aff9b6
Screen changes and fixes (#1651) 
* Fixed bluetooth reinit bug

* Remove screen transition ms

* Whoops

* hasScreen is smarter now

* Oops
 2022-08-25 11:25:05 -05:00
majbthrd aadaf332cf
add stm32wl5e platform and wio-e5 variant (#1631) 
Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-08-15 07:54:45 -05:00
Thomas Göttgens 3b8566747c
Merge branch 'master' into src-cleanup 2022-08-10 15:47:08 +02:00
neil 90d3cc2ff8 'Station-g1-patch1' 2022-08-10 19:26:43 +08:00
Thomas Göttgens d125b0ec3c
Merge branch 'master' into src-cleanup 2022-08-10 11:39:47 +02:00
Thomas Göttgens 5e842dd735 Put a bit of order in the src directory, group and name things appropriately 2022-08-10 11:31:29 +02:00
Thomas Göttgens 31788feab1
Update platformio.ini 2022-08-10 10:03:47 +02:00
Thomas Göttgens 519f31ed60 fix portduino build 2022-08-10 10:00:23 +02:00
Thomas Göttgens 0c8fb6e27f Raspberry Pi Pico target (with sparkfun lora hat) does compile but needs further work. 
Also contains a small fix to make PRIVATE_HW targets build again for nRF52 architectures
 2022-08-08 23:11:19 +02:00
Thomas Göttgens 6382f67b89 Replace TBEAM_V10 macro guards with more appropriate HAS_AXP192. Also eliminates symbol redefinition of AXP192_SLAVE_ADDRESS 2022-08-08 16:13:38 +02:00
neil faac761dc0 'station-g1' 2022-08-03 04:23:32 +08:00
majbthrd ade32b1827
lay groundwork for a possible future architecture (#1571) 
* lay groundwork for a possible future architecture

* switch from feature opt-out to feature opt-in

* lay groundwork for a possible future architecture

* switch from feature opt-out to feature opt-in

* fix USE_RTC in variant.h for rak4631_epaper and t-echo

* ensure Screen.h is not included without configuration.h

Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-07-31 07:11:47 -05:00
Ben Meadors 13a287ce5c
firmare (#1575) 2022-07-29 17:58:42 -05:00
Ben Meadors a7d527c3c3
Pins for m5stack-core 2022-06-20 12:41:03 -05:00
Mark Trevor Birss 2e2c485f4c
M5Stack CoreInk Pins_Arduino.h (#1527) 
* Update EInkDisplay2.cpp

* Create pins_arduino.h

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-06-20 12:33:44 -05:00
Mark Trevor Birss 4e813b098a
Update platformio.ini 2022-06-01 20:30:21 +02:00
Mark Trevor Birss 0d09767efd
Update variant.h 2022-06-01 18:11:06 +02:00
Mark Trevor Birss 5828e6f423
Update variant.h 2022-06-01 18:08:40 +02:00
Mark Trevor Birss c7a9ce7f49
Update variant.h 2022-06-01 18:08:13 +02:00
Mark Trevor Birss 95f091041b
Update variant.h 2022-06-01 17:53:19 +02:00
Mark Trevor Birss f33e6a0e66
Update platformio.ini 2022-06-01 17:49:10 +02:00
Mark Trevor Birss fe8bfdb762
Update variant.h 2022-06-01 17:48:31 +02:00
Mark Trevor Birss a7fbe024e4
Create variant.h 2022-06-01 11:12:45 +02:00
Mark Trevor Birss 1f7fee8e2a
Create platformio.ini 2022-06-01 11:10:49 +02:00
Ben Meadors 0767c0b0e8
Converted to jgromes/RadioLib upstream and pegged to latest ref (#1472) 
* Converted to jgromes/RadioLib upstream and pegged to latest ref
 2022-05-29 19:30:20 -05:00
Thomas Göttgens 49d8c581bd missed one here as well... 2022-05-17 11:26:03 +02:00
Thomas Göttgens c15da3c104 Make PIO6 happy again 2022-05-17 11:14:21 +02:00
Thomas Göttgens 7133e6e89b Use canon HW Identifier for M5 2022-05-10 11:10:32 +02:00
Thomas Göttgens e1d49a3632 Buzzer Support for M5Stack 2022-05-10 11:07:49 +02:00
Thomas Göttgens 5ee8c56c94 Support M5Stack with LORA868 (RA01H) Module and TFT Display (PRIVATE_HW, Canon Hardware TBD) 2022-05-09 19:50:39 +02:00
Thomas Göttgens 628740d6d1 Support Buzzer in Slot C 2022-05-06 14:20:46 +02:00
Thomas Göttgens 251365dca7 Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-05-06 14:05:51 +02:00
Ben Meadors 2b769279ae
Moving platform-native into meshtastic fork (#1437) 2022-05-05 13:20:16 -05:00
Thomas Göttgens 403a0b2ddc Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-05-04 09:17:06 +02:00
Mark Trevor Birss 8e996e3e63
Enable TXEN and RXEN for Waveshare LoRa Module (#1422) 
This change enables RXEN TXEN for the use of the Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band
https://www.waveshare.com/core1262-868m.htm
 2022-04-29 14:23:17 -05:00
Thomas Göttgens 516dff5b09 RTC Module support for T-Echo and others with PCF8563 2022-04-28 08:18:03 +02:00
Thomas Göttgens 9e97fac252 - implement generic support for on-device battery powered RTC Modules. 
- implement support for I2C RV-3028 based RTC modules like the RAK12002
- pretty print some debug timestamps
 2022-04-27 11:05:08 +02:00
Thomas Göttgens b957001629 Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-04-25 21:38:28 +02:00
Thomas Göttgens 213d9512f1
WIP: unify the RAK targets into one firmware (#1350) 
* First steps to unify GPS Lib for RAK 1910 and RAK 12500

* Technicalities. Out with the old and build the new.

* Adapt Matrix

* We use 0.4.5 now

* While we're at it, yank the RAK815, it's EOL

* Satisfy CI - for now

* - yank UBX library, talk to GPS chip with NMEA only.
- more autodetect going on, this time for the Eink Display.

TODO: actually do something with the scan findings.

* i swear this works on windows! :-)

* these are only there to make CI happy

* don't update eink display if not detected.

* Replace Oberon Crypt Library with modified Adafruit Library. This elimintaes the need for the sdk-nfxlib submodule.

* - Revert auto screen selection (incomplete)
- Revert nrF crypto engine (needs more work)
- add separate defines for not-auto-selecting screen lib.

* Define 2 new variants for RAK - with or without epaper

* Update variants

Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
 2022-04-25 15:13:41 +10:00
Thomas Göttgens c6a2e26876 Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-04-20 09:51:35 +02:00
amerinoj b59368ca3c
Updated pinut in variant tlorav2_1_16 (#1365) 
* Added the last mac address bytes in bluetooth device name ESP32Bluetooth.cpp
Add default notification pinout to tlora_v2_1_16/variant.h

* updated ADC_MULTIPLIER  value for more accuracy

* Update variant.h

Updated LORA_RESET GPIO in this board is 23
Removed LORA_DIO1 35 , gpio 35 is a battery pin 
Removed LORA_DIO2 34, gpio 34 is unuse in this board

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
 2022-04-12 07:13:25 -05:00
Thomas Göttgens 06aae85e45 Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-04-06 13:06:15 +02:00
Mark Trevor Birss b7aa1397c7
Add DIY nRF82540 PCA10059 4.2inch NiceRF 868 (#1354) 
* Update build-all.sh

* Update configuration.h

* Update EInkDisplay2.cpp

* Create platformio.ini

* Create variant.cpp

* Create variant.h

* Update platformio.ini

* Update check-all.sh

* Create nordic_pca10059.json

* Update variant.h

* Update EInkDisplay2.cpp

* Update configuration.h

* Update platformio.ini

* Update EInkDisplay2.cpp

* Update variant.h

* Update EInkDisplay2.cpp

* Update configuration.h

* Update EInkDisplay2.cpp

* Update variant.h

* Update nordic_pca10059.json

* Update platformio.ini

* Update platformio.ini

* Update platformio.ini

* Update platformio.ini

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update configuration.h

* Update EInkDisplay2.cpp

* Update variant.h

* Update variant.h

* Update platformio.ini

* Update configuration.h

* Update configuration.h

* Update platformio.ini

* Update platformio.ini

* Update configuration.h

* Update platformio.ini

* Update configuration.h

* Update platformio.ini

* Update configuration.h

* Update configuration.h

* Update platformio.ini

* Update configuration.h

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-04-05 11:46:07 -05:00
Thomas Göttgens a2df441e1f Merge branch 'master' of github.com:meshtastic/Meshtastic-device 
# Conflicts:
#	variants/heltec_v1/variant.h
 2022-04-05 11:03:51 +02:00
neilhao 0c600363c8
add nano g1 (#1351) 
* add nano g1

* Update platformio.ini

* Update configuration.h

* Revert platformio.ini to previous state

* Update configuration.h

* Update platformio.ini

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
 2022-04-04 20:16:19 +10:00
Thomas Göttgens fd407a2a9e GPS Pin Change for V2 and V1 too. 2022-04-02 12:57:10 +02:00
Thomas Göttgens 7c4bb80977 Variable GPS Thread Timing, keep default of 100 msec 2022-04-02 12:52:50 +02:00
Thomas Göttgens d246c31548 GPS Pin Changes on V 2.0 and V1 too. 2022-04-02 12:16:42 +02:00
Thomas Göttgens 19589bf12d Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-04-02 12:05:30 +02:00
Thomas Göttgens ba984aebfa Varaible GPS Thread Timing, keep default of 100 msec 2022-04-02 12:05:07 +02:00
ssysm 357c9fcd76 revert 2022-04-01 23:38:23 -04:00
Sacha Weatherstone 2ed8ea10c0 Remove eink0.1 and Air530 files 2022-03-29 22:28:34 +11:00
amerinoj 501067cd36
Added the last mac address bytes in bluetooth device and default notification pinout to tlora_v2_1_16 (#1320) 
* Added the last mac address bytes in bluetooth device name ESP32Bluetooth.cpp
Add default notification pinout to tlora_v2_1_16/variant.h

* updated ADC_MULTIPLIER  value for more accuracy
 2022-03-25 07:24:56 -05:00
Ben Meadors 362795a7c8
Meshtastic-diy battery and adc multiplier 2022-03-24 19:20:15 -05:00
Thomas Göttgens bbf044795a
weed out old versioning macros (#1312) 
weed out old versioning macros
 2022-03-20 11:53:37 +01:00
Jm Casler e53abbfb2b more rename plugin to module 2022-02-27 02:21:02 -08:00
Jm Casler 218a208ab7 mv plugins/ to modules/ 2022-02-26 23:56:26 -08:00
Jm Casler ac43a1b182 Rename environmental measurement to telemetry 2022-02-26 20:52:22 -08:00
Mark Trevor Birss c5a8cc6d3f
Add 1.54, 2.9 and 4.2 inch e-Paper support for RAK4361 boards - with partial updates for faster screen transitions (#1240) 
* Update platformio.ini
 2022-02-25 07:03:52 -06:00
Mark Trevor Birss 8303500b74
Add RAK4361_5005_RAK14000 board variant and enable e-Paper module (#1199) 
* Create platformio.ini

* Create variant.cpp

* Create variant.h

* Update EInkDisplay2.cpp

* Update build-all.sh
 2022-02-19 07:30:30 -06:00
Ben Meadors d79dc631f1
Fixed RAK11200 configuration and added to build-all (#1192) 
* Fixed RAK11200 configuration and added to build-all 

Co-authored-by: Mike Kinney <mike.kinney@gmail.com>
 2022-02-10 20:21:36 -06:00
Ben Meadors c867af8522
Adjusted adc_multiplier for heltec2.1 and added adc_mulitplier_override (#1183) 2022-02-09 13:37:48 -06:00
Ben Meadors 365120e9c2
Added RAK11200 board variant support (#1177) 
* Added RAK11200 board variant support
 2022-02-02 12:41:07 -06:00
Ben Meadors 66413d8b7f
Refactored sensors (#1172) 
* Refactored sensors
 2022-01-31 20:24:32 -06:00
Vladislav Osmanov a4e9fca80c
DIY versions cleaning - moved to the one folder (#1167) 2022-01-28 14:58:27 -06:00
Vladislav Osmanov f4d3de086a
Fix MISO/MOSI pins for DIY v1.1 2022-01-27 16:49:55 +03:00
Thomas Göttgens 409ad9c2c3
Split platformio.ini into one file for each board, only leaving platform definitions and a handful of stale (?) boards around.. (#1141) 2022-01-25 08:56:16 -06:00
co sto a2eef895bd
Create variant.h 2022-01-24 20:40:28 +01:00
co sto 64671c8ce7
Delete variants/heltev_v2.1 directory 2022-01-24 20:38:51 +01:00
co sto c6b851a2e6
Update variant.h 2022-01-24 19:01:23 +01:00
co sto ec4346aba3
Update variant.h 2022-01-24 18:59:09 +01:00
co sto 791186a264
Create variant.h 2022-01-24 18:58:32 +01:00
co sto ab947f06aa
Delete .heltec_v2.1 2022-01-24 18:55:51 +01:00
co sto cfa0ceb604
Create .heltec_v2.1 2022-01-24 18:55:26 +01:00
co sto fe9dcbb316
Delete heltec_v2.1 2022-01-24 18:40:15 +01:00
co sto 38d1a381e6
Create heltec_v2.1 2022-01-24 18:35:25 +01:00
co sto 39d0c0fd8f
Merge branch 'meshtastic:master' into master 2022-01-24 14:00:33 +01:00
Vladislav Osmanov d1ba314065 Meshtastic DIY v1.1 new schematic 2022-01-23 23:44:58 +03:00
co sto 91ad0df11c
Update variant.h 2022-01-23 17:04:55 +01:00
Vladislav Osmanov bfd9938507 RFM95/SX127x support in DIY 2022-01-22 16:13:52 +03:00
co sto 2230cbbe2a
Correction for wrong battery display on tlora_v2_1_16 board (#1120) 
* Update variant.h
 2022-01-20 20:47:30 -06:00
Ben Meadors 4e3fda87a1
Initial configuration.h -> variants refactor (#1104) 
* Initial configuration to variants refactor
 2022-01-18 18:35:42 -06:00
Erik R Norell 17dfb7d152 Touch on T-Echo to refresh e-ink screen 2022-01-07 09:57:29 +03:00
Ben Meadors 66085d7447 RAK-5005 button pin mapping tweak 2021-12-09 19:59:04 -06:00
Ben Meadors c8bea4f091 Split RAK-4631 targets by base board 2021-12-07 20:42:06 -06:00
Османов Владислав Юрьевич 76791220b9 Fix radio module declaration for `NRF52_SERIES` in `variant.h`-files 2021-10-14 16:16:20 +03:00
Vladislav Osmanov 56dd3eab23 use common param name `SX126X_ANT_SW` instead of the `SX1262_ANT_SW` 2021-09-14 12:25:25 +03:00
Vladislav Osmanov 098f38fb83 New base class for SX126x modules. Added new SX1268 module support. 2021-09-12 00:35:16 +03:00
claes 5110a6de82 Battery sense for T-Echo 
Copied battery stuff from RAK4631 to T-Echo
I got the voltage divider figures for T_Echo from SoftRF at
https://github.com/lyusupov/SoftRF/blob/master/software/firmware/source/SoftRF/src/platform/nRF52.h

I dont have a T-Echo so this code
HAS NOT BEEN TESTED
 2021-08-10 10:07:40 +02:00
claes 32fea4cbd7 Fix for reading battery level on RAK-4631 
Build tested on RAK4631 with battery and their solar panel box.
This is from the log:
17:40:30 102 [Power] Battery: usbPower=0, isCharging=0, batMv=4164, batPct=96
Note that mV reading and Pct is ok.
It does not detect being connected to USB and charging.

Also tested on TBEAM where it seems to be ok.

There still seems to be a problem with the FW for this board that it goes to
sleep for ever after running for a few hours.
 2021-07-25 18:25:11 +02:00
Kevin Hester c27d479a9f t-echo: add hwmodel 2021-04-29 09:51:10 +08:00
Kevin Hester a42bb80cf4 pinelora wip 2021-04-28 14:47:29 +08:00
Kevin Hester 2a9b2d3b29 official name for t-echo board 2021-04-27 10:21:54 +08:00
Kevin Hester ec18efbe7e Add beginnings of RAK4600 and update to latest nrf52 arduino sources 2021-04-15 11:45:58 +08:00
Kevin Hester 55b38a7b02 RAK4631 is almost feature complete 2021-04-12 13:25:55 +08:00
Kevin Hester 7224782d23 rak4631: gps now works 2021-04-11 15:17:56 +08:00
Kevin Hester f7d199a3be rak4631: kinda runs 2021-04-11 13:58:48 +08:00
Kevin Hester 328b24537f rak4631: builds but WIP 2021-04-11 13:33:27 +08:00
Vadim Furman d3cbc8ea78 WIRE_INTERFACES_COUNT -> NO_WIRE 2021-03-19 18:46:11 -07:00
Vadim Furman b6e197371d Removed SX1262_USE_DIO3_FOR_TCXO 2021-03-19 18:30:00 -07:00
Vadim Furman 0c51cc3738 Fix hardware model 2021-03-17 10:56:45 -07:00
Vadim Furman ddcfff3b59 Fixed compilation on nrf52 and brownout code 2021-03-17 10:44:42 -07:00
Vadim Furman c62863b1dc Merge from origin 2021-03-14 19:42:57 -07:00
Vadim Furman 98d878cdfe Port to lora_isp4520 board 2021-03-14 19:00:20 -07:00
Kevin Hester 6e37fe6343 turn radio back on 2021-03-10 15:24:00 +08:00
Kevin Hester 5835abbcf6 fix eink leds 2021-03-09 15:06:28 +08:00
Kevin Hester 6a593e01e1 notes on eink1.0 2021-01-28 10:30:24 +08:00
Kevin Hester d1f0be215b eink leds seem a bit busted 2021-01-16 11:42:06 +08:00
Kevin Hester f110225173 Update variant file and qspi flash programming settings for new ttgoeink 
Note: bin/qspi-flash-test.sh contains a script you can use for basic
bench programming and testing of the serial spi flash over SWD
 2021-01-16 10:34:46 +08:00
Kevin Hester 51d0d0d6c5 begin new ttgo eink board 2021-01-16 09:57:55 +08:00
Kevin Hester 047df76373 move rev 0.1 of the ttgo eink board to eink0.1 2021-01-16 09:55:06 +08:00
Kevin Hester ad8bcba5ef remove hack for the othernet ppr1 rev 1 board 2020-12-13 11:54:00 +08:00
Kevin Hester 67e657f10f always print debug output to both serial and segger debug port 
cc @mc-hamster, this  makes USE_SEGGER optional on nrf52 targets
 2020-11-13 07:48:25 +08:00
Kevin Hester bbc36f7b6f switch to my new SD 7.2.0 S113 based bootloader 2020-10-31 12:22:20 +08:00
Kevin Hester 4ad562b9f4 The new 7.2.0 soft device works on nrf52833 2020-10-28 13:01:50 +08:00
Kevin Hester 1a8891c33d ppr1: add crude version of charge controller driver 2020-10-24 18:40:47 +08:00
Kevin Hester f0eeaf01d4 ppr1 lcd is 'good enough' for now 2020-10-24 09:49:14 +08:00
Kevin Hester 0767c8be03 PPR1 fix screen mirroring on LCD 2020-10-24 08:16:15 +08:00
Kevin Hester b081a6da56 ppr1 st7567 lcd kinda works now 2020-10-23 18:00:43 +08:00
Kevin Hester a102e49fdb PPR1 WIP - hacky code to make LCD talk on I2C. Works! 2020-10-23 17:10:48 +08:00
Kevin Hester e1f0e11cb8 ppr1 WIP DO NOT MERGE - will break other clients 2020-10-17 13:15:12 +08:00
Kevin Hester 22f23bb07d Merge branch 'dev' into ppr1 
# Conflicts:
#	src/gps/NMEAGPS.cpp
 2020-10-16 15:59:55 +08:00
Kevin Hester 9134faaed1 turn off segger debug in ttgo eink build 2020-10-15 16:11:40 +08:00
Kevin Hester 5f2f3c94b9 PPR1 and allow boards to set lower or higher sx1262 power limits 2020-10-15 13:47:10 +08:00
Kevin Hester ca77d48b20 corvus2 gps still doesn't work WIP 2020-10-13 14:43:28 +08:00
Kevin Hester 965c2bda8d corvus2 board builds 2020-10-13 13:59:06 +08:00
geeksville 124a82888d add power testing notes for eink 2020-09-28 17:38:36 -07:00
geeksville fec7a6bf17 add air530 gps sleep support 2020-09-28 17:04:19 -07:00
geeksville bc50b39a3b put eink screen to sleep to save power 2020-09-28 16:08:52 -07:00
geeksville 116fe6d109 eink bootloader finished 2020-09-28 15:18:32 -07:00
geeksville 6a4ef7e1d1 eink board serial flash seems to work 2020-09-28 14:10:33 -07:00
geeksville a0fd83428f eink use RESET button as regular button instead 2020-09-28 13:10:27 -07:00
geeksville e5d4fbb164 fix pins per email eink 2020-09-28 13:03:54 -07:00
geeksville 28ec0e310d make bat voltage sensing work on eink 2020-09-26 18:13:16 -07:00
geeksville 266ba03bb7 route debug output back to the CDC-ACM device instead of JLINK 2020-09-26 13:49:22 -07:00
geeksville db33200468 remove more stale eink code 2020-09-26 12:51:05 -07:00
geeksville d7fbcf89bf cleanup todo eink now ready to merge 2020-09-26 12:36:11 -07:00
geeksville a8b1bc735a remove debugging code eink gps now works 2020-09-26 12:12:50 -07:00
geeksville ba8c640d6e eink leds kinda work now 2020-09-26 10:53:02 -07:00
geeksville d88d2780f4 eink display now kinda works 2020-09-26 09:40:48 -07:00
geeksville b0bbf95b03 LORA now works on the eink board (new schematic from ttgo) 2020-09-26 07:25:32 -07:00
geeksville 772d045166 more eink notes 2020-09-25 10:41:27 -07:00
geeksville 6f77244af3 eink wip notes 2020-09-25 09:14:00 -07:00
geeksville a79aff4778 WIP - I think some pins are wrong, waiting for new schematic 2020-09-24 16:36:07 -07:00
geeksville 5fbeaee0b0 eink kinda builds 2020-09-24 14:36:43 -07:00
geeksville f1ca1ee3c0 okay basic support for @bigcorvus board is done 2020-08-29 12:46:42 -07:00
geeksville dffb6c2f06 If display is on on the @BigCorvus board and we xmit the board browns out? 2020-08-28 17:38:23 -07:00
geeksville 7f214ffbb0 TFT kinda correct now - but slow because of bit banging 2020-08-28 15:33:33 -07:00
geeksville d91ab5480f begin support for TFT displays 2020-08-17 13:47:05 -07:00
geeksville 781077e799 Turn on buck converter for @BigCorvus board, now radio works 2020-08-17 11:42:19 -07:00
geeksville 22946b5e51 @BigCorvus board now kinda boots 
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.

SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
 2020-08-17 11:29:00 -07:00
geeksville 6b568ab2fb add powerhold for @bigcorvus board 2020-08-16 14:50:04 -07:00
geeksville 67bad9a689 Add SX1262 to @BigCorvus board 2020-08-16 14:20:05 -07:00
geeksville 559a790286 Add @BigCorvus board support to build 2020-08-16 14:08:31 -07:00
geeksville 08e5bd728b lorarelay wip 2020-08-16 14:07:01 -07:00
geeksville 0cfeeba2e2 add variant files by @BigCorvus 2020-08-16 13:25:24 -07:00
geeksville cb1053850d Oops - I mismerged at somepoint, restore correct PPR variant.h defs 2020-08-03 11:05:24 -07:00
geeksville acbe8c159b move rak815 variant to arduino repo 2020-07-10 12:38:11 -07:00
geeksville 5b07d454b1 WIP RAK815 now builds correctly 2020-07-10 11:29:32 -07:00
geeksville b00a936f41 WIP RAK815 support 2020-07-10 11:02:29 -07:00
geeksville 477c62082d E22 SX1262 module now works! 
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429)

We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
 2020-06-15 14:38:09 -07:00
geeksville 4b5cfaf9ba changes from bringing up PPR 2020-06-05 11:00:18 -07:00
geeksville c12fb69ca2 update protos 2020-05-10 14:17:05 -07:00
geeksville 8b911aba7f Cleanup build for NRF52 targets 2020-05-10 12:33:17 -07:00
geeksville 814c126e67 ugly WIP on switching to RadioLib, still need to set freq etc... 2020-04-29 14:54:03 -07:00
geeksville a7d153abcb CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board 2020-04-29 12:57:34 -07:00
geeksville b8b503cb0a Add starting point of PPR variants definition 2020-04-24 12:40:22 -07:00
geeksville bb885a5110 add a variant based on the nrf52840-dk but with a RC clock. 
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
 2020-04-24 12:30:06 -07:00