0860fee209
Merge branch 'develop' into dev-heltec-tracker-v2
2025-10-02 06:10:00 -05:00
b28d095096
missed t-rexes
2025-10-01 13:32:44 -05:00
4fd568f384
Initial support for T-Rex
2025-10-01 13:32:44 -05:00
8d323a1cf1
add heltec tracker v2 board.
2025-09-30 08:20:48 +10:00
cea9e1238b
Add heltec_v4 board. ( #7845 )
...
* add heltec_v4 board.
* Update variants/esp32s3/heltec_v4/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Limit the maximum output power.
* Trunk fixes
Fixes formatting to match meshtastic trunk linter.
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-09-21 07:13:28 -05:00
11eb4a5b90
Add heltec_v4 board. ( #7845 )
...
* add heltec_v4 board.
* Update variants/esp32s3/heltec_v4/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Limit the maximum output power.
* Trunk fixes
Fixes formatting to match meshtastic trunk linter.
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-09-21 07:03:44 -05:00
39ff880506
reorganize 8MB partition for MUI devices ( #7860 )
...
* reorganize 8MB partition for MUI devices
* update device-install scripts to MUI 8MB partition scheme
2025-09-08 05:56:47 -05:00
0bd4cefad3
Make ExternalNotification show up in excluded_modules, more STM32 modules ( #7797 )
...
* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
2025-09-02 07:09:15 -05:00
3b82d55176
Revert "Add gat562_mesh_tracker_pro device. ( #7815 )" ( #7824 )
...
This reverts commit 7d1300ab66
2025-09-02 06:17:01 -05:00
7d1300ab66
Add gat562_mesh_tracker_pro device. ( #7815 )
2025-09-02 13:06:24 +08:00
0903ed8232
Mesh solar integrate ( #7764 )
...
* Added HELTEC MeshSolar board. (#7499 )
* Added HELTEC MeshSolar board.
* Set emergency shutdown pin as high impedance
* Set emergency shutdown pin as high impedance
Set emergency shutdown pin as high impedance
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update I2C SCL pin definition in variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Updates
---------
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-08-27 06:02:54 -05:00
f413c49555
Add Meshtiny device ( #7676 )
...
* Add Meshtiny device - nRF52 OLED upDown encoder
* Update platformio.ini
* Update platformio.ini
* Add GPS Exclude to Meshtiny.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-08-20 11:52:10 +08:00
b3525c2569
T-Deck Pro support ( #6936 )
...
* initial draft
* fix touchscreen
* fix touchscreen
* optimize GPS
* battery management
* cleanup comments
* enable vibration motor
* refactored TCA8418Keyboard
* update HW_VENDOR id
* manual fixes after merge
* fix keyboard/BQ27220 detection
* add BQ27220
* modify charge voltage and current
* update XpowerLib
* design capacity
* try-fix charge behavior
* improve Vbus detection
* moved variant into esp32s3 folder
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2025-07-21 19:33:24 +02:00
354f149338
Make PacketHistory logging less chatty ( #7272 )
2025-07-08 15:12:44 -05:00
798b1f4d86
Add HWIDs for T1000-E in DFU mode ( #7235 )
2025-07-05 07:35:20 -05:00
409dfe22ae
Fix Seeed L1 board to enable consistent PIO flashing ( #7211 )
2025-07-02 20:58:15 -05:00
90e99b2bac
feat: add support for RAK3312 (New RAKwireless wiscore ESP32-S3 + SX1262) ( #7115 )
...
* Add support for RAK3112 variant with necessary configurations and definitions
* Add the configuration of the LED pin
* Refactor rak3112 variant configuration: update name, remove unused files,
* Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions
* Update RAK3112 hardware vendor definition to use correct model
* configure LED pins and update module definitions
* Update USB mode configuration for RAK3112 board
* Update power and battery configuration in rak3112 variant
* Cancel the modification of mesh.pb.h
* Rename RAKwireless RAK3112 to RAK3312
---------
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-07-02 06:03:42 -05:00
b0c5327585
Trunk
2025-06-15 07:40:45 -05:00
5d0bf03b01
add support for GAT562 Mesh Trial Tracker ( #6984 )
...
* add support for GAT562 Mesh Trial Tracker
* Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER
* Added RAK4630 for led pin 2 (blue)
* Added RAK4630 for led pin 2 (blue) comment
* don't touch src/mesh/NodeDB.cpp
* set fixed baudrate for gat562_mesh_trial_tracker
* adjust the order of the HW_VENDOR defines
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
2025-06-13 17:27:48 +10:00
cf4f088337
Update URL for ThinkNode M1 ( #7005 )
2025-06-10 13:52:30 +10:00
22cb20d294
Update heltec t114 URL ( #7004 )
2025-06-10 13:51:37 +10:00
c0c2ec195f
add support for seeed wio tracker L1 ( #6907 )
...
* add support for seeed wio tracker l1
* add support in nrf52 arch
* fix ADC problem and comments incorrect
* fix gps wakeup pin
* fix gps pin
2025-05-29 06:33:22 -05:00
b1955c34aa
Update Seeed Solar Node ( #6763 )
...
* Update Seeed Solar Node
* Update Seeed Solar Node
* updates
* updates
* updates
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-05-14 06:32:24 -05:00
cc66f7c79b
Crowpanel 4.3, 5.0, 7.0 support ( #6611 )
...
* SD software SPI control
* fix notification crash;
* allow wake on touch
* don't build non-MUI variants
* use pwm buzzer
* Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5
* add hardware ID for TFT panels
* Add stubs for the bigger panels. WIP!
* fix braces
* elecrow 4.3, 5.0, 7.0 support
* completed implementation 4.3, 5.0, 7.0 variants
* NodeDB default config & simplified light sleep macros
* trunk fmt
* remove flags
* removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
2025-05-13 14:15:52 +02:00
ef14967fbf
Crowpanel 2.4,2.8 and 3.5 support ( #6355 )
...
Co-authored-by: mverch67 <manuel.verch@gmx.de>
2025-04-17 16:03:37 +02:00
d74359abf0
add support for Seeed solar panel ( #6597 )
...
* add seeed_solar_node
* fix RF_SW problem
* fix IIC problem
* Update Button redefination
* Add on-board flash pin defination
* fix missing a ','
* update seeed sorlar panel defination
* fix word spell
* fix upstream change
* fix upstream change
* fix upstream change
* fix formate
* Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption
* fix led defination conflict
* Delete lib/device-ui directory
* Restore protobufs submodule
---------
Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>
2025-04-17 16:11:17 +10:00
98411d408a
Trunk fixes for heltec mesh pocket. ( #6588 )
...
https://github.com/meshtastic/firmware/pull/6533 was merged
without running trunk. This patch fixes the newly introduced
trunk errors.
2025-04-15 16:37:09 -05:00
b46aad85cc
Add new hardware: Heltec MeshPocket ( #6533 )
...
* Add Heltec MeshPocket.
* MeshPocket source code update
* Optimiz code for refresh border during full update.
* Update Heltec MeshPocket json file info.
2025-04-15 13:34:30 +10:00
baa05aacf5
fix: Correct underlying cause of T-Watch not functioning when set to a 16MB filesystem ( #6563 )
...
* Fix maximum flash size in T-Watch S3 board definition
* Revert "Fix: T-Watch-S3 has 8MB Flash (#6407 )"
This reverts commit 769f0623be
2025-04-11 13:04:37 +02:00
2125c03974
Fix for PSRAM detection on ESP32-S3R8 and t-beam ( #6504 )
...
* remove duplicate HAS_LP5562 introduced by #6422
* T190 PSRAM fix
* all the boards with a ESP32-S3R8
* T-beam V1.1 PSRAM
2025-04-06 20:27:46 -05:00
f626f02005
Add 'bluetooth' option to the LilyGo T-Watch-S3 definition.
2025-03-31 09:14:48 +02:00
4a12b4eb32
add Thinknode-M1 ( #6435 )
...
* ThinkNode M1
* Update Epaper Driver
* Your day isn't complete unless trunk has complained about your formatting at least once.
2025-03-28 21:22:17 +01:00
186e509607
Update esp32-s3-pico.json ( #6284 )
...
* Update esp32-s3-pico.json
* Update esp32-s3-pico.json
2025-03-11 13:11:11 +02:00
445efe9e21
Add support for seeed_xiao_nrf52840_kit ( #6231 )
...
* add support for seeed_xiao_nrf52840_kit
* Update platformio.ini remove board level define
2025-03-05 16:22:25 -06:00
f0f2cd0e0e
RAK11310 Fix build with latest Arduino framework ( #6227 )
2025-03-04 21:39:10 +01:00
7eb77276cd
Add support for new NRF52 board, MeshLink ( #5736 )
...
* Add support for MeshLink
* Updated, enabled watchdog and added button definition
* added eink variant and removed some compile errors
* Small board json file edit
* Finally got trunk working (somehow?), this is just cleanup with trunk fmt
* Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :)
* Enable on-board QSPI Flash
* run trunk fmt with clang-format
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
2025-02-16 19:49:17 -06:00
89ebafc8b8
Minor TFT branch cherry-picks ( #5682 )
...
* update indicator board
* Fixed the issue that indicator device uploads via rp2040 serial port in some cases.
* esp debug logs
* USB mode=1 messed up the debug log
* dummy for config transfer (#5154 )
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2024-12-28 08:32:24 -06:00
ad726ad684
More meshtab cherry-pick ( #5681 )
...
* board definition for mesh-tab (not yet used)
* use board definition for mesh-tab
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
2024-12-28 08:29:58 -06:00
8e6ef4ea04
add nugget and nibble boards for 38c3 ( #5609 )
...
* add nugget and nibble boards for 38c3
* mark those boards extra for now
2024-12-21 14:57:01 +01:00
af79970ad7
Added product url ( #5594 )
2024-12-18 15:46:18 +11:00
c071eed6a3
cherry-pick: unphone support ( #5174 )
...
* unphone part 1
* Unphone support
* update HWid unphone
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
2024-10-28 09:25:25 +01:00
82145e0661
Cherry picks ( #5166 )
...
* fix compiler error std::find()
* fix wifi/bt connection status
* try-fix crash
* added 1200baud reset
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
2024-10-28 10:21:57 +10:00
e37369a25f
Icarus - Custom PCB ( #5155 )
...
* added Icarus
* added Icarus
* Update platformio.ini
* Fixed I2C ports
* Update variant.h
2024-10-26 19:24:30 -05:00
8acc9ccf5f
Remove support for pca10056-rc-clock ( #4955 )
...
In 2020, geeksville had a NRF52840-dk development board with a
busted oscilliator. Let's retire it from service :)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-10-05 05:26:54 -05:00
243421b2a5
Retire lora-relay boards ( #4957 )
...
The lora-relay boards were important pathfinders for nrf52
support some years back. They are no longer commonly produced and
there are now many nrf52 options on the market. Retire these
boards and associated variant.
2024-10-05 05:25:28 -05:00
6d6ed55ed7
Retire PPR Boards ( #4956 )
...
The Othernet project appears to have failed. Retire these
boards/variants.
2024-10-05 05:25:14 -05:00
1293c5cdd4
Support for Seeed XIAO S3 Board ( #4850 )
...
* feat: add seeed-xiao-s3 board defination and pins defination
* chore: add SEEED XIAO S3 into mesh pb
* fix: fix trunk fmt check failed
* Trunk fmt variant.h
* Restore automatically generated file
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
2024-09-25 18:27:14 +08:00
5c4c0965af
Update nordic_pca10059.json
2024-09-19 15:41:59 +08:00
7289b295e8
Update me25ls01-4y10td.json
2024-09-19 15:41:59 +08:00
7c32ab3023
Update ms24sf1.json
2024-09-19 15:41:59 +08:00
Ben Meadors