3.6 KiB

Czysty Wina Historia

Kiln Controller

Turns a Raspberry Pi into a cheap, web-enabled kiln controller.

Features

easy to install and run on most Raspberry Pi versions
easy to create new kiln schedules and edit / modify existing schedules
no limit to runtime - fire for days if you want
view status from multiple devices at once - computer, tablet etc
firing cost estimate
NIST-linearized conversion for accurate K type thermocouple readings
supports PID parameters you tune to your kiln

Run Kiln Schedule

Edit Kiln Schedule

Hardware

Image	Hardware	Description
	Raspberry Pi	Virtually any Raspberry Pi will work
	MAX 31855	Thermocouple circuit board

Raspberry Pi
MAX 31855/6675 Cold-Junction K-Type Thermocouple
GPIO driven Solid-State-Relay

Installation

Raspbian

Download NOOBs. Copy files to an SD card. Install raspian on RPi using NOOBs.

$ sudo apt-get install python-pip python-dev libevent-dev python-virtualenv
$ git clone https://github.com/jbruce12000/kiln-controller.git
$ cd kiln-controller
$ virtualenv venv
$ source venv/bin/activate
$ pip install greenlet bottle gevent gevent-websocket

Note: the above steps work on ubuntu if you prefer

Raspberry PI deployment

If you want to deploy the code on a PI for production:

$ cd kiln-controller
$ virtualenv venv
$ source venv/bin/activate
$ pip install RPi.GPIO

If you also want to use the in-kernel SPI drivers with a MAX31855 sensor:

$ pip install Adafruit-MAX31855

Configuration

All parameters are defined in config.py, just copy the example and review/change to your mind's content.

$ cp config.py.EXAMPLE config.py

Usage

Server Startup

$ source venv/bin/activate; ./kiln-controller.py

Autostart Server onBoot

If you want the server to autostart on boot, run the following commands

$ /home/pi/kiln-controller/start-on-boot

Client Access

Open Browser and goto http://127.0.0.1:8080 (for local development) or the IP of your PI and the port defined in config.py (default 8080).

Simulation

Select a profile and click Start. If you do not have a raspberry pi connected and configured, or if you don't install the Adafruit-MAX31855 library, then your run will be simulated. Simulations run at near real time and kiln characteristics are defined in config.py.

License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

Support & Contact

Please use the issue tracker for project related issues.

More info: https://apollo.open-resource.org/mission:resources:picoreflow

3.6 KiB Czysty Wina Historia