mirror
/
inkstitch
kopia lustrzana https://github.com/inkstitch/inkstitch
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

corrections

pull/1370/head
Kaalleen 2020-11-29 19:58:20 +01:00
rodzic 8329f4a4bf
commit be3ff2001d
5 zmienionych plików z 14 dodań i 14 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

10
collections/_tutorials/de/001-002-embroidery-machine.md
Wyświetl plik

@ -158,20 +158,20 @@ These are only ones that are important, recommend to read setups for $0-$4 just
| Item | Length | PCS | note |
|---|---|---|---|
|Sewing machine || 1 | Fully working one will do|
|Nema || 17 | stepper 3 Anything that suits 3D printers or similar applications|
|Nema || 23 | stepper 1 This drives sewing, bigger is better|
|Nema 17 stepper || 3 | Anything that suits 3D printers or similar applications|
|Nema 23 stepper || 1 | This drives sewing, bigger is better|
|Stepper driver TB6600 || 1 | Or similar to suit sewing machine stepper|
|Arduino uno || 1 ||
|GRBL shield for uno || 1 | Make sure it is equipped with 4 stepper driver places|
|DRV8825 || 3 | Stepper drivers for nema 17 steppers|
|Jumpers || 9 | For micro stepping configuration|
|Jumper wires x Connecting sewing machine stepper driver and controls|
|Jumper wires || x | Connecting sewing machine stepper driver and controls|
|Connecting wires || x | Connecting everything else|
|8mm linear slide | 400mm | 4 Stainless rods or better|
|8mm linear slide | 400mm | 4 | Stainless rods or better|
|LM8UU || 8 | 8mm linear bearings|
|624ZZ bearings || 6 | Tightening bearings for belt|
|8mm GT2 belt | 3M || Or 3x 800mm|
|GT2 pulley || 16 | Teeth 3 Suitable for nema17 steppers|
|GT2 pulley 16 Teeth || 3 | Suitable for nema17 steppers|
|Mounting for big stepper || 1 | Depends on what was used|
|Gear and belt for machine ||| Timing belt or chain, to keep machine on sync.|
|M4 screws | 20mm | 60 | Some are extra|

4
collections/_tutorials/en/001-002-embroidery-machine.md
Wyświetl plik

@ -162,9 +162,9 @@ These are only ones that are important, recommend to read setups for $0-$4 just
|GRBL shield for uno || 1 | Make sure it is equipped with 4 stepper driver places|
|DRV8825 || 3 | Stepper drivers for nema 17 steppers|
|Jumpers || 9 | For micro stepping configuration|
|Jumper wires x Connecting sewing machine stepper driver and controls|
|Jumper wires || x | Connecting sewing machine stepper driver and controls|
|Connecting wires || x | Connecting everything else|
|8mm linear slide | 400mm | 4 Stainless rods or better|
|8mm linear slide | 400mm | 4 | Stainless rods or better|
|LM8UU || 8 | 8mm linear bearings|
|624ZZ bearings || 6 | Tightening bearings for belt|
|8mm GT2 belt | 3M || Or 3x 800mm|

10
collections/_tutorials/fr/001-002-embroidery-machine.md
Wyświetl plik

@ -155,20 +155,20 @@ These are only ones that are important, recommend to read setups for $0-$4 just
| Item | Length | PCS | note |
|---|---|---|---|
|Sewing machine || 1 | Fully working one will do|
|Nema || 17 | stepper 3 Anything that suits 3D printers or similar applications|
|Nema || 23 | stepper 1 This drives sewing, bigger is better|
|Nema 17 stepper || 3 | Anything that suits 3D printers or similar applications|
|Nema 23 stepper || 1 | This drives sewing, bigger is better|
|Stepper driver TB6600 || 1 | Or similar to suit sewing machine stepper|
|Arduino uno || 1 ||
|GRBL shield for uno || 1 | Make sure it is equipped with 4 stepper driver places|
|DRV8825 || 3 | Stepper drivers for nema 17 steppers|
|Jumpers || 9 | For micro stepping configuration|
|Jumper wires x Connecting sewing machine stepper driver and controls|
|Jumper wires || x | Connecting sewing machine stepper driver and controls|
|Connecting wires || x | Connecting everything else|
|8mm linear slide | 400mm | 4 Stainless rods or better|
|8mm linear slide | 400mm | 4 | Stainless rods or better|
|LM8UU || 8 | 8mm linear bearings|
|624ZZ bearings || 6 | Tightening bearings for belt|
|8mm GT2 belt | 3M || Or 3x 800mm|
|GT2 pulley || 16 | Teeth 3 Suitable for nema17 steppers|
|GT2 pulley 16 Teeth || 3 | Suitable for nema17 steppers|
|Mounting for big stepper || 1 | Depends on what was used|
|Gear and belt for machine ||| Timing belt or chain, to keep machine on sync.|
|M4 screws | 20mm | 60 | Some are extra|

2
index_de.html
Wyświetl plik

@ -6,7 +6,7 @@ lang: de
sidebar:
nav: "pages"
---
<p>Eine auf Inkscape basierende, quelloffene Design-Plattform für Stickereien.</p>
<p>Eine auf <a href="https://inkscape.org/">Inkscape</a> basierende, quelloffene Design-Plattform für Stickereien.</p>
<img src="https://user-images.githubusercontent.com/11083514/41197881-e862e07a-6c62-11e8-89d6-32915e52bece.png" alt="Ink/Stitch" style="margin-bottom: 1em;">

2
index_fr.html
Wyświetl plik

@ -6,7 +6,7 @@ lang: fr
sidebar:
nav: "pages"
---
<p>Une plateforme open source de création de motifs de broderie machine.</p>
<p>Une plateforme open source de création de motifs de broderie machine (<a href="https://inkscape.org/">Inkscape</a> extension).</p>
<img src="https://user-images.githubusercontent.com/11083514/41197881-e862e07a-6c62-11e8-89d6-32915e52bece.png" alt="Ink/Stitch" style="margin-bottom: 1em;">