kopia lustrzana https://github.com/espressif/esp-idf
73 wiersze
2.0 KiB
Markdown
73 wiersze
2.0 KiB
Markdown
| Supported Targets | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S3 |
|
|
| ----------------- | -------- | -------- | -------- | -------- |
|
|
|
|
# I2S Basic TDM Mode Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example is going to show how to use the TDM mode in simplex mode or full-duplex mode.
|
|
|
|
## How to Use Example
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with any supported Espressif SOC chip (see `Supported Targets` table above)
|
|
* A USB cable for power supply and programming
|
|
|
|
### Configure the Project
|
|
|
|
There are simplex mode and duplex mode can be chosen in this example, setting `EXAMPLE_I2S_DUPLEX_MODE` to `0` will adopt the simplex mode, otherwise it will adopt the full-duplex mode.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT build flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
While `EXAMPLE_I2S_DUPLEX_MODE` is set to `1`, then you can see the following log:
|
|
|
|
```
|
|
Write Task: i2s write 2048 bytes
|
|
Read Task: i2s read 2048 bytes
|
|
-----------------------------------
|
|
[0] 12 [1] 34 [2] 56 [3] 78
|
|
[4] 9a [5] bc [6] de [7] f0
|
|
|
|
Write Task: i2s write 2048 bytes
|
|
Read Task: i2s read 2048 bytes
|
|
-----------------------------------
|
|
[0] 12 [1] 34 [2] 56 [3] 78
|
|
[4] 9a [5] bc [6] de [7] f0
|
|
...
|
|
```
|
|
|
|
While `EXAMPLE_I2S_DUPLEX_MODE` is set to `0`, you can see the receiving data is always `0` because no signal inputted:
|
|
|
|
```
|
|
Write Task: i2s write 2048 bytes
|
|
Read Task: i2s read 2048 bytes
|
|
-----------------------------------
|
|
[0] 0 [1] 0 [2] 0 [3] 0
|
|
[4] 0 [5] 0 [6] 0 [7] 0
|
|
|
|
Write Task: i2s write 2048 bytes
|
|
Read Task: i2s read 2048 bytes
|
|
-----------------------------------
|
|
[0] 0 [1] 0 [2] 0 [3] 0
|
|
[4] 0 [5] 0 [6] 0 [7] 0
|
|
...
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
|
|