kopia lustrzana https://github.com/espressif/esp-idf
85 wiersze
3.5 KiB
Markdown
85 wiersze
3.5 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
|
|
|
# ESP-IDF Blufi Example
|
|
|
|
This demo shows how to use the *Blufi* to configurate the Wi-Fi connection to AP.
|
|
|
|
The BluFi for ESP32 is a Wi-Fi network configuration function via Bluetooth channel. It provides a secure protocol to pass Wi-Fi configuration and credentials to the ESP32.
|
|
|
|
## How to Use Example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using:
|
|
|
|
```bash
|
|
idf.py set-target <chip_name>
|
|
```
|
|
|
|
To test this demo, you need to prepare a mobile phone with blufi application installed. You can download the blufi application from [Android version](https://github.com/EspressifApp/EspBlufi) and [iOS version](https://itunes.apple.com/cn/app/espblufi/id1450614082?mt=8).
|
|
|
|
Blufi is completely open source, here is the download link:
|
|
|
|
* [Blufi source code](https://github.com/espressif/esp-idf/tree/master/examples/bluetooth/blufi)
|
|
* [BluFi protocol](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/blufi.html?highlight=blufi#the-frame-formats-defined-in-blufi)
|
|
* [iOS source code](https://github.com/EspressifApp/EspBlufiForiOS)
|
|
* [Android source code](https://github.com/EspressifApp/EspBlufi)
|
|
* [Bluetooth Network User Guide CN](https://www.espressif.com/sites/default/files/documentation/esp32_bluetooth_networking_user_guide_cn.pdf)
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32/ESP32-C3/ESP32-S3/ESP32-C2 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
|
|
* A USB cable for Power supply and programming
|
|
|
|
See [Development Boards](https://www.espressif.com/en/products/devkits) for more information about it.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://idf.espressif.com/) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
```
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (708) wifi:wifi driver task: 3ffbb118, prio:23, stack:6656, core=0
|
|
I (708) system_api: Base MAC address is not set
|
|
I (708) system_api: read default base MAC address from EFUSE
|
|
I (718) wifi:wifi firmware version: 44799ff
|
|
I (718) wifi:wifi certification version: v7.0
|
|
I (718) wifi:config NVS flash: enabled
|
|
I (718) wifi:config nano formating: disabled
|
|
I (728) wifi:Init data frame dynamic rx buffer num: 32
|
|
I (728) wifi:Init management frame dynamic rx buffer num: 32
|
|
I (738) wifi:Init management short buffer num: 32
|
|
I (738) wifi:Init dynamic tx buffer num: 32
|
|
I (748) wifi:Init static rx buffer size: 1600
|
|
I (748) wifi:Init static rx buffer num: 10
|
|
I (748) wifi:Init dynamic rx buffer num: 32
|
|
I (758) wifi_init: rx ba win: 6
|
|
I (758) wifi_init: tcpip mbox: 32
|
|
I (768) wifi_init: udp mbox: 6
|
|
I (768) wifi_init: tcp mbox: 6
|
|
I (768) wifi_init: tcp tx win: 5744
|
|
I (778) wifi_init: tcp rx win: 5744
|
|
I (778) wifi_init: tcp mss: 1440
|
|
I (788) wifi_init: WiFi IRAM OP enabled
|
|
I (788) wifi_init: WiFi RX IRAM OP enabled
|
|
I (798) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
|
|
I (908) wifi:mode : sta (fc:f5:c4:3c:62:90)
|
|
I (908) wifi:enable tsf
|
|
I (908) BTDM_INIT: BT controller compile version [1342a48]
|
|
I (1198) BLUFI_EXAMPLE: BD ADDR: fc:f5:c4:3c:62:92
|
|
|
|
I (1198) BLUFI_EXAMPLE: BLUFI VERSION 0102
|
|
|
|
I (1198) BLUFI_EXAMPLE: BLUFI init finish
|
|
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|