kopia lustrzana https://github.com/espressif/esp-idf
122 wiersze
3.5 KiB
Markdown
122 wiersze
3.5 KiB
Markdown
| Supported Targets | ESP32-C3 | ESP32-S3 |
|
|
| ----------------- | -------- | -------- |
|
|
|
|
# Certification Test Example
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
This example shows how to use the Certification test APIS.
|
|
|
|
## How to use example
|
|
|
|
Before project configuration and build, be sure to set the correct chip target using `idf.py set-target <chip_name>`.
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with ESP32-C3/ESP32-S3/ SoC.
|
|
* A USB cable for Power supply and programming
|
|
|
|
### Configure the project
|
|
|
|
Open the project configuration menu (`idf.py menuconfig`).
|
|
|
|
In the `Example Configuration` menu:
|
|
|
|
* Enable RF certification test functions.
|
|
* Disable Interrupt Watchdog.
|
|
* Disable Task Watchdog Timer.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run the monitor tool to view the serial output:
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
|
|
|
|
* [ESP-IDF Getting Started Guide on ESP32-C3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html)
|
|
* [ESP-IDF Getting Started Guide on ESP32-S3](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/get-started/index.html)
|
|
|
|
## Example Output
|
|
|
|
The command and output logs for each test are as follows:
|
|
|
|
```
|
|
==================================================
|
|
| RF certification test |
|
|
| |
|
|
| 1. Print 'help' to gain overview of commands |
|
|
| 2. Wi-Fi certification test |
|
|
| 3. Bluetooth certification test |
|
|
| |
|
|
=================================================
|
|
|
|
|
|
Type 'help' to get the list of commands.
|
|
Use UP/DOWN arrows to navigate through command history.
|
|
Press TAB when typing command name to auto-complete.
|
|
I (598) main_task: Returned from app_main()
|
|
phy>
|
|
phy> tx_contin_en 1
|
|
I (11870) phy: Tx continuous test!
|
|
phy>
|
|
phy> tx_contin_en 0
|
|
I (19860) phy: Tx packet test!
|
|
phy>
|
|
phy> cbw40m_en 1
|
|
I (25660) phy: cbw40m_en: 1
|
|
phy>
|
|
phy> cbw40m_en 0
|
|
I (33490) phy: cbw40m_en: 0
|
|
phy>
|
|
phy> esp_tx -n 1 -r 0x0 -p 0 -l 1000 -d 1000 -c 0
|
|
I (39640) phy: Wifi tx out: chan=1, rate=0x0, BK=0, len=1000, delay=1000, tx_num=0
|
|
phy>
|
|
phy> cmdstop
|
|
I (45460) phy: Tx Over 0x0
|
|
phy>
|
|
phy> esp_rx -n 1 -r 0
|
|
I (51130) phy: wifi rx start: channel is 1, rate is 0x0
|
|
phy>
|
|
phy> cmdstop
|
|
I (58800) phy: rx_num: 166 rx_rssi: -527
|
|
phy>
|
|
phy> get_rx_result
|
|
I (66350) cmd_phy: Desired: 167, Correct: 166, RSSI: -527, flag: 1
|
|
phy>
|
|
phy> wifiscwout -e 1 -c 1 -p 0
|
|
I (80310) phy: wifi single carrier tx start: chan=1, pwr=20-0.0
|
|
phy>
|
|
phy> wifiscwout -e 0 -c 1 -p 0
|
|
I (88260) phy: wifi single carrier tx stop
|
|
phy>
|
|
phy> esp_ble_tx -p 8 -n 1 -l 37 -t 2 -s 0x71764129 -r 0 -m 0
|
|
I (91470) phy: ble_tx:pwr=8,chan=1,len=37,type=2,syncw=0x71764129,rate=0,txnum=0
|
|
phy>
|
|
phy> cmdstop
|
|
I (98650) phy: rw done! e22e
|
|
phy>
|
|
phy> esp_ble_rx -n 1 -s 0x71764129 -r 0
|
|
I (104990) phy: RW LE V9 RX PER
|
|
phy>
|
|
phy> cmdstop
|
|
I (130260) phy: rx_num: 0 rx_rssi: 0
|
|
phy>
|
|
phy> get_rx_result
|
|
I (139550) cmd_phy: Desired: 0, Correct: 0, RSSI: 0, flag: 2
|
|
phy>
|
|
phy> bt_tx_tone -e 1 -n 1 -p 0
|
|
I (151900) phy: BT TX TONE START!
|
|
phy>
|
|
phy> bt_tx_tone -e 0 -n 1 -p 0
|
|
I (191970) phy: BT TX TONE STOP!
|
|
phy>
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|
|
|