esp-idf/components/hal/spi_flash_hal.c

111 wiersze
3.9 KiB
C

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include "hal/spi_flash_hal.h"
#include "string.h"
#include "soc/spi_caps.h"
#include "hal/hal_defs.h"
#define APB_CYCLE_NS (1000*1000*1000LL/APB_CLK_FREQ)
static const char TAG[] = "FLASH_HAL";
typedef struct {
int freq;
spi_flash_ll_clock_reg_t clock_reg_val;
} spi_flash_hal_clock_config_t;
static const spi_flash_hal_clock_config_t spi_flash_clk_cfg_reg[ESP_FLASH_SPEED_MAX] = {
{5e6, SPI_FLASH_LL_CLKREG_VAL_5MHZ},
{10e6, SPI_FLASH_LL_CLKREG_VAL_10MHZ},
{20e6, SPI_FLASH_LL_CLKREG_VAL_20MHZ},
{26e6, SPI_FLASH_LL_CLKREG_VAL_26MHZ},
{40e6, SPI_FLASH_LL_CLKREG_VAL_40MHZ},
{80e6, SPI_FLASH_LL_CLKREG_VAL_80MHZ},
};
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
static const spi_flash_hal_clock_config_t spi_flash_gpspi_clk_cfg_reg[ESP_FLASH_SPEED_MAX] = {
{5e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_5MHZ}},
{10e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_10MHZ}},
{20e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_20MHZ}},
{26e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_26MHZ}},
{40e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_40MHZ}},
{80e6, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_80MHZ}},
};
#endif
static inline int get_dummy_n(bool gpio_is_used, int input_delay_ns, int eff_clk)
{
const int apbclk_kHz = APB_CLK_FREQ / 1000;
//calculate how many apb clocks a period has
const int apbclk_n = APB_CLK_FREQ / eff_clk;
const int gpio_delay_ns = gpio_is_used ? GPIO_MATRIX_DELAY_NS : 0;
//calculate how many apb clocks the delay is, the 1 is to compensate in case ``input_delay_ns`` is rounded off.
int apb_period_n = (1 + input_delay_ns + gpio_delay_ns) * apbclk_kHz / 1000 / 1000;
if (apb_period_n < 0) {
apb_period_n = 0;
}
return apb_period_n / apbclk_n;
}
esp_err_t spi_flash_hal_init(spi_flash_hal_context_t *data_out, const spi_flash_hal_config_t *cfg)
{
if (!esp_ptr_internal(data_out)) {
return ESP_ERR_INVALID_ARG;
}
if (cfg->cs_num >= SOC_SPI_PERIPH_CS_NUM(cfg->host_id)) {
return ESP_ERR_INVALID_ARG;
}
spi_flash_hal_clock_config_t clock_cfg = spi_flash_clk_cfg_reg[cfg->speed];
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
if (cfg->host_id > SPI_HOST) {
clock_cfg = spi_flash_gpspi_clk_cfg_reg[cfg->speed];
}
#endif
*data_out = (spi_flash_hal_context_t) {
.inst = data_out->inst, // Keeps the function pointer table
.spi = spi_flash_ll_get_hw(cfg->host_id),
.cs_num = cfg->cs_num,
.extra_dummy = get_dummy_n(!cfg->iomux, cfg->input_delay_ns, clock_cfg.freq),
.clock_conf = clock_cfg.clock_reg_val,
};
ESP_EARLY_LOGD(TAG, "extra_dummy: %d", data_out->extra_dummy);
return ESP_OK;
}
bool spi_flash_hal_supports_direct_write(spi_flash_host_inst_t *host, const void *p)
{
bool direct_write = ( ((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI_HOST)
|| esp_ptr_in_dram(p) );
return direct_write;
}
bool spi_flash_hal_supports_direct_read(spi_flash_host_inst_t *host, const void *p)
{
//currently the host doesn't support to read through dma, no word-aligned requirements
bool direct_read = ( ((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI_HOST)
|| esp_ptr_in_dram(p) );
return direct_read;
}