kopia lustrzana https://github.com/espressif/esp-idf
27 wiersze
994 B
Markdown
27 wiersze
994 B
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
## SPI master half duplex EEPROM example
|
|
|
|
This code demonstrates how to use the SPI master half duplex mode to read/write a AT93C46D
|
|
EEPROM (8-bit mode). There is also an Kconfig option `EXAMPLE_USE_SPI1_PINS` allowing use the
|
|
SPI1 (bus with code Flash connected on official modules).
|
|
|
|
### Connections
|
|
|
|
For different chip and host used, the connections may be different. Here show a example diagram of hardware connection, you can freely change the GPIO defined in start of `main/spi_eeprom_main.c` and change the hardware relatively.
|
|
|
|
| | ESP32 |
|
|
| ---- | ----- |
|
|
| Host | SPI1 |
|
|
| VCC | 3.3V |
|
|
| GND | GND |
|
|
| DO | 7 |
|
|
| DI | 8 |
|
|
| SK | 6 |
|
|
| CS | 13 |
|
|
| ORG | GND |
|
|
|
|
### Notes
|
|
|
|
If you meet timeout issues, please check your connections. |