kopia lustrzana https://github.com/espressif/esp-idf
86 wiersze
3.8 KiB
Markdown
86 wiersze
3.8 KiB
Markdown
# Asio SSL client/server example
|
|
|
|
Simple Asio client and server with SSL/TLS transport
|
|
|
|
## How to Use Example
|
|
|
|
### Hardware Required
|
|
|
|
This example can be executed on any ESP platform board. No external connection is required, it is recommended though
|
|
to connect to internet or a local network via WiFi or Ethernet to easily exercise features of this example.
|
|
|
|
### Configure the project
|
|
|
|
* Open the project configuration menu (`idf.py menuconfig`)
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
|
|
* Enable the ASIO client and set server's host name to examine client's functionality.
|
|
The ASIO client connects to the configured server and sends default payload string "GET / HTTP/1.1"
|
|
* Enable the ASIO server to examine server's functionality. The ASIO server listens to connection and echos back what was received.
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
|
|
### Client connecting to public server
|
|
|
|
The below output illustrates the client connecting to a public https server.
|
|
|
|
```
|
|
I (1267) example_connect: Waiting for IP(s)
|
|
I (2587) wifi:new:<11,0>, old:<1,0>, ap:<255,255>, sta:<11,0>, prof:1
|
|
I (3367) wifi:state: init -> auth (b0)
|
|
I (3377) wifi:state: auth -> assoc (0)
|
|
I (3387) wifi:state: assoc -> run (10)
|
|
I (3397) wifi:security type: 3, phy: bgn, rssi: -49
|
|
I (3397) wifi:pm start, type: 1
|
|
I (3457) wifi:AP's beacon interval = 102400 us, DTIM period = 1
|
|
I (4747) example_connect: Got IPv6 event: Interface "example_connect: sta" address: fe80:0000:0000:0000:260a:xxxx:xxxx:xxxx, type: ESP_IP6_ADDR_IS_LINK_LOCAL
|
|
I (5247) esp_netif_handlers: example_connect: sta ip: 192.168.32.69, mask: 255.255.252.0, gw: 192.168.32.3
|
|
I (5247) example_connect: Got IPv4 event: Interface "example_connect: sta" address: 192.168.32.69
|
|
I (5257) example_connect: Connected to example_connect: sta
|
|
I (5257) example_connect: - IPv4 address: 192.168.32.69
|
|
I (5267) example_connect: - IPv6 address: fe80:0000:0000:0000:260a:xxxx:xxxx:xxxx, type: ESP_IP6_ADDR_IS_LINK_LOCAL
|
|
W (5277) esp32_asio_pthread: pthread_condattr_setclock: not yet supported!
|
|
W (5297) esp32_asio_pthread: pthread_condattr_setclock: not yet supported!
|
|
Reply: HTTP/1.1 200 OK
|
|
D
|
|
```
|
|
### Both server and client enabled
|
|
|
|
The below output demonstrates the client connecting to the ASIO server via loopback interface, so no WiFi, nor Ethernet connection
|
|
was established.
|
|
```
|
|
I (0) cpu_start: App cpu up.
|
|
I (495) heap_init: Initializing. RAM available for dynamic allocation:
|
|
I (502) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
|
|
I (508) heap_init: At 3FFB5400 len 0002AC00 (171 KiB): DRAM
|
|
I (515) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
|
|
I (521) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
|
|
I (527) heap_init: At 4008BB80 len 00014480 (81 KiB): IRAM
|
|
I (534) cpu_start: Pro cpu start user code
|
|
I (556) spi_flash: detected chip: gd
|
|
I (556) spi_flash: flash io: dio
|
|
W (556) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
|
|
I (566) cpu_start: Starting scheduler on PRO CPU.
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (600) example_connect: Waiting for IP(s)
|
|
W (600) esp32_asio_pthread: pthread_condattr_setclock: not yet supported!
|
|
W (1610) esp32_asio_pthread: pthread_condattr_setclock: not yet supported!
|
|
W (1610) esp32_asio_pthread: pthread_condattr_setclock: not yet supported!
|
|
Server received: GET / HTTP/1.1
|
|
|
|
|
|
Reply: GET / HTTP/1.1
|
|
```
|
|
See the README.md file in the upper level 'examples' directory for more information about examples.
|