kopia lustrzana https://github.com/espressif/esp-idf
25 wiersze
1.4 KiB
Markdown
25 wiersze
1.4 KiB
Markdown
# Wi-Fi Examples
|
|
|
|
This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.
|
|
|
|
# Example Layout
|
|
|
|
The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:
|
|
|
|
* `espnow` is the connectionless Wi-Fi communication protocol.
|
|
* `fast_scan` shows how to use fast scan while connecting to an AP..
|
|
* `ftm` is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
|
|
* `getting_started` contains the basic examples for using Wi-Fi in STA and AP mode.
|
|
* `iperf` shows the common performance measurements for two ESP running this example.
|
|
* `power_save` contains a how to use power save mode of Wi-Fi.
|
|
* `roaming` contains a example using 802.11k and 802.11v APIs.
|
|
* `scan` shows how to scan for all the available APs.
|
|
* `smart_config` shows how ESP connects to a target AP with ESPTOUCH.
|
|
* `wifi_easy_connect` shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
|
|
* `wpa2_enterprise` connects to AP with WPA2 enterprise encryption.
|
|
* `wps` contains a how to use the Wi-Fi Protected Setup protocol.
|
|
|
|
# More
|
|
|
|
See the [README.md](../README.md) file in the upper level [examples](../) directory for more information about examples.
|