kopia lustrzana https://github.com/espressif/esp-idf
27 wiersze
1.1 KiB
Markdown
27 wiersze
1.1 KiB
Markdown
| Supported Targets | ESP32 | ESP32-S2 | ESP32-S3 | ESP32-C3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- |
|
|
|
|
# Mesh Internal Communication Example
|
|
|
|
This example demonstrates how to use the mesh APIs to set up a mesh network, send and receive messages over the mesh network and etc.
|
|
|
|
Features Demonstrated
|
|
|
|
- mesh initialization
|
|
|
|
- mesh configuration
|
|
|
|
- mesh start
|
|
|
|
- mesh event handler
|
|
|
|
- root send and receive
|
|
|
|
- other nodes receive
|
|
|
|
Open project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings.
|
|
|
|
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are.
|
|
The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.
|
|
Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.
|