Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
If the TimerGroup 0 clock is disabled and then reenabled, the watchdog
registers (Flashboot protection included) will be re-enabled, and some
seconds later, will trigger an unintended reset.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
jiangguangming