This commit deprecates the "freertos/xtensa_timer.h" and "xtensa/xtensa_timer.h"
include paths. Users should use "xtensa_timer.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_timer.h"
- Add warning to compatibility header
This commit deprecates the "freertos/xtensa_context.h" and "xtensa/xtensa_context.h"
include paths. Users should use "xtensa_context.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Add warning to compatibility header
This commit deprecates the "freertos/xtensa_api.h" and "xtensa/xtensa_api.h"
include paths. Users should use "xtensa_api.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Replaced some calls with "esp_cpu_..." equivalents
- Add warning to compatibility header
By default, CMake message() commands prints to stderr.
IDEs like Eclipse show stderr output in red, which looks as if this is
some kind of error.
Use message(STATUS) instead.
This commit adds "bare metal stubs" xtensa_rtos.h glue layer to mimic a bare
metal OS port. The bare metal stubs don't access any components outside of the
G0 group.
When porting an RTOS to the Xtensa architecture, there are a few files that
are common to all Xtensa RTOS ports. These files form the Xtensa RTOS porting
layer (e.g., "xtensa_vectors.S", "xtensa_context.S"). An Xtensa RTOS port is
expected to provide an RTOS specific "xtensa_rtos.h" header to interface with
the Xtensa RTOS porting layer.
Previously, the Xtensa RTOS porting layer files were placed in the FreeRTOS
component. This commit does the following:
1. Moves the Xtensa RTOS porting layer files from the `freertos` component to
the `xtensa` component. The following files were moved:
- xtensa_asm_utils.h
- xtensa_context.S
- xtensa_loadstore_handler.S
- xtensa_vectors.S
2. Refactored xtensa component include paths to separate Xtensa RTOS porting
layer headers.
- Xtensa HAL headers included via `#include <xtensa/...h>`
- Xtensa RTOS porting layer headers included via `#include <...h>`
Note: The xtensa files in the Amazon SMP FreeRTOS port are not moved/deleted in
this commit to ensure the moved files retain a clean diff history.
The Xtensa FreeRTOS port does not save the threadptr register when
doing a voluntary yield. This can result in a crash when multiple
tasks used the threadptr register and call "taskYIELD()".
This commit adds the threadptr register to the solicited stack frame.
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:
- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead
Also updated soc_hal.h as follows:
- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.
This commit also updates the XCHAL_ERRATUM_572 workaround by
- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
This commit updates the esp_cpu.h API. The new API presents a new
abstraction of the CPU where CPU presents the following interfaces:
- CPU Control (to stall/unstall/reset the CPU)
- CPU Registers (to read registers commonly used in SW such as SP, PC)
- CPU Interrupts (to inquire/allocate/control the CPUs 32 interrupts)
- Memory Port (to configure the CPU's memory bus for memory protection)
- Debugging (to configure/control the CPU's debugging port)
Note: Also added FORCE_INLINE_ATTR to the DoxyFile in order to pass doc
builds for esp_cpu.h
If a windowoverflow8 happened after changing the SP, the exception handler would look for
the extra save area by looking at the previous frame's SP. This SP would be a garbage value
and could cause the windowoverflow exception to write to invalid memory ares.
This commit does the following:
- Adds SPDX license identifiers to FreeRTOS sources. Remove those FreeRTOS sources from
the copyright ignore list.
- Update xtensa port files to match FreeRTOS v10.4.3. Added SPDX license identifiers
to the port files.
- Fixed some improperly licensed files
- Removed portbenchmark.h from RISC-V port
The compiler was not informed that the assembly block should be
treated as a memory barrier and could optimize out the initialization
of local arrays which could be used as semihosting arguments.
This resulted in garbage values being passed as semihosting call
arguments.
Additionally this commit changes the approach for placing values into
specific register. Instead of clobbers, local register variables are
used. This results in simpler generated code, since the compiler is
able to place values directly into the registers used for semihosting
arguments, avoiding additional moves.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
From LX7_ESP32_S3_MP_linux_redist.tgz with SHA256:
63f305a982b2ee94cc78e5c20e3e3eb8bf0edeeaf703af0227a418bc34f7b848
copied from xtensa-elf/arch/include/xtensa/config/ with changes:
1) pre-commit fixes applied
2) re-added CONFIGID0 and CONFIGID1 in specreg.h
* Patched longjmp to be context-switch safe
longjmp modifies the windowbase and windowstart
registers, which isn't safe if a context switch
occurs during the modification. After a context
switch, windowstart and windowbase will be
different, leading to a wrongly set windowstart
bit due to longjmp writing it based on the
windowbase before the context switch. This
corrupts the registers at the next window
overflow reaching that wrongly set bit.
The solution is to disable interrupts during
this code. It is only 6 instructions long,
the impact shouldn't be significant.
The fix is implemented as a wrapper which
replaces the original first instructions of
longjmp which are buggy. Then, it jumps back
to execute the rest of the original longjmp
function.
Added a comparably reliable test to the
test apps.
* Functions for setting and clearing interrupts
as well as function to read interrupt mask
should be clearer now.
* Using hal layer interrupt set and clear
functions in esp_wifi component
Omar Chebib