[Domoticz](https://www.domoticz.com) is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device.
We utilise the docker manifest for multi-platform awareness. More information is available from docker [here](https://github.com/docker/distribution/blob/master/docs/spec/manifest-v2-2.md#manifest-list) and our announcement [here](https://blog.linuxserver.io/2019/02/21/the-lsio-pipeline-project/).
Simply pulling `lscr.io/linuxserver/domoticz:latest` should retrieve the correct image for your arch, but you can also pull specific arch images via tags.
To get full use of Domoticz, you probably have a USB device you want to pass through. To figure out which device to pass through, you have to connect the device and look in dmesg for the device node created. Issue the command 'dmesg | tail' after you connected your device and you should see something like below.
```
usb 1-1.2: new full-speed USB device number 7 using ehci-pci
ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
usb 1-1.2: Detected FT232RL
usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
```
As you can see above, the device node created is ttyUSB0. It does not say where, but it's almost always in /dev/. The correct tag for passing through this USB device is '--device /dev/ttyUSB0:/dev/ttyUSB0'
Docker images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate `<external>:<internal>` respectively. For example, `-p 8080:80` would expose port `80` from inside the container to be accessible from the host's IP on port `8080` outside the container.
Will set the environment variable `PASSWORD` based on the contents of the `/run/secrets/mysecretpassword` file.
## Umask for running applications
For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional `-e UMASK=022` setting.
Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up [here](https://en.wikipedia.org/wiki/Umask) before asking for support.
When using volumes (`-v` flags), permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user `PUID` and group `PGID`.
[](https://mods.linuxserver.io/?mod=domoticz "view available mods for this container.") [](https://mods.linuxserver.io/?mod=universal "view available universal mods.")
We publish various [Docker Mods](https://github.com/linuxserver/docker-mods) to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.
* **26.12.20:** - Rebase to Ubuntu Focal, see [here](https://docs.linuxserver.io/faq#my-host-is-incompatible-with-images-based-on-ubuntu-focal) for troubleshooting armhf.
