[![](https://images.microbadger.com/badges/version/linuxserver/domoticz.svg)](https://microbadger.com/images/linuxserver/domoticz "Get your own version badge on microbadger.com")
[![](https://images.microbadger.com/badges/image/linuxserver/domoticz.svg)](https://microbadger.com/images/linuxserver/domoticz "Get your own version badge on microbadger.com")
[Domoticz](https://www.domoticz.com) is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device.
Our images support multiple architectures such as `x86-64`, `arm64` and `armhf`. We utilise the docker manifest for multi-platform awareness. More information is available from docker [here](https://github.com/docker/distribution/blob/master/docs/spec/manifest-v2-2.md#manifest-list) and our announcement [here](https://blog.linuxserver.io/2019/02/21/the-lsio-pipeline-project/).
This image provides various versions that are available via tags. `latest` tag usually provides the latest stable version. Others are considered under development and caution must be exercised when using them.
To get full use of Domoticz, you probably have a USB device you want to pass through. To figure out which device to pass through, you have to connect the device and look in dmesg for the device node created. Issue the command 'dmesg | tail' after you connected your device and you should see something like below.
As you can see above, the device node created is ttyUSB0. It does not say where, but it's almost always in /dev/. The correct tag for passing through this USB device is '--device /dev/ttyUSB0:/dev/ttyUSB0'
Docker images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate `<external>:<internal>` respectively. For example, `-p 8080:80` would expose port `80` from inside the container to be accessible from the host's IP on port `8080` outside the container.
When using volumes (`-v` flags), permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user `PUID` and group `PGID`.