mirror
/
codec2_talkie
kopia lustrzana https://github.com/sh123/codec2_talkie
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

pull/14/head
sh123 2020-12-14 18:46:44 +02:00 zatwierdzone przez GitHub
rodzic c5a529b8f5
commit af313f8c8b
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 1 dodań i 1 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
README.md
Wyświetl plik

@ -38,7 +38,7 @@ This minimalistic Android application is a digital voice frontend for your radio
# FAQ
- Gaps in received audio, indicator often changes between RX/IDLE on the receiver side when sender and recipient are close by then
- most likey you do not have enough bandwidth, use higher throughput modem mode, for LoRa modems you need approximately 170% of data rate for the given codec2 bitrate, AFSK1200 modems should work at 450 bps codec2 mode, 700 bps might work, but not on all modems, higher speed codec2 modes won't work on AFSK1200
- most likely you do not have enough bandwidth, use higher throughput modem mode, for LoRa modems you need approximately 170% of data rate for the given codec2 bitrate, AFSK1200 modems should work at 450 bps codec2 mode, 700 bps might work, but not on all modems, higher speed codec2 modes won't work on AFSK1200
- modem goes into RX state too fast after sending first packet, increase TxTail parameter for your modem, so it will longer TX tail before switching to RX
- if you are using LibAPRS based modem, set TxTail and TxPreamble programatically by using `APRS_setPreamble` and `APRS_setTail` methods as it does not seem to set these values from `CMD_TXDELAY` and `CMD_TXTAIL` KISS commands