Update README.md

README.md

@@ -38,7 +38,7 @@ It does not deal with radio management, modulation, etc, it is up to your modem
 - **PTT hardware button**, `KEYCODE_TV_DATA SERVICE` (230 key code) hardware buttons are used for PTT (latter is used on some Android network radios), `KEYCODE_HEADSETHOOK` tx on/off on click, volume up/down buttons could be used for ptt if enabled in Preferences
 - **USB serial connectivity** (default 115200 bps, 8 data bits, 1 stop bit, no parity), just select this app after connecting to USB and it will use given connection, baud rate could be changed from Preferences
 - **Bluetooth connectivity** on startup, lists paired devices, so you can choose your modem and connect, you need to pair with your Bluetooth device first from Android Bluetooth Settings, default Bluetooth device could be set from Preferences
-- **TCP/IP connectivity** on startup, application can coonnect to TCP/IP based modem and operate through the network, for example, with Direwolf application over KISS
+- **TCP/IP connectivity** on startup, application can connect to TCP/IP based modem and operate through the network, for example, with Direwolf application
 - **Voice codec2 mode selection**, which allows you to select various codec2 modes from 450 up to 3200 bps on the fly, sender and receiver should agree on the codec mode and use the same codec mode on both ends as codec2 mode negotiation between clients is not implemented at the moment
 - **Codec2 loopback mode**, which records and plays your recorded voice back to test and evaluate different Codec2 modes and speech quality, could be enabled or disabled from Preferences, this mode is activated if no USB or Bluetooth connection were made
 - **Voice level VU indicator**, display audio level on transmit or receive