1.0 KiB

Czysty Wina Historia

BH1750 usermod

This usermod requires a second UART and was only tested on the ESP32

This usermod will read from a LD2410 movement/presence sensor.

The movement and presence state are displayed in both the Info section of the web UI, as well as published to the /movement and /stationary MQTT topics respectively.

Dependencies

Libraries
- ncmreynolds/ld2410@^0.1.3
- This must be added under lib_deps in your platformio.ini (or platformio_override.ini).
Data is published over MQTT - make sure you've enabled the MQTT sync interface.

Compilation

To enable, compile with USERMOD_LD2410 defined (e.g. in platformio_override.ini)

[env:usermod_USERMOD_LD2410_esp32dev]
extends = env:esp32dev
build_flags =
    ${common.build_flags_esp32}
    -D USERMOD_LD2410
lib_deps = 
    ${esp32.lib_deps}
    ncmreynolds/ld2410@^0.1.3

Configuration Options

The Usermod screen allows you to:

enable/disable the usermod
Configure the RX/TX pins

Change log

2024-06 Created by @wesleygas (https://github.com/wesleygas/)

1.0 KiB Czysty Wina Historia