kopia lustrzana https://github.com/Aircoookie/WLED
31 wiersze
1.5 KiB
Markdown
31 wiersze
1.5 KiB
Markdown
# SN_Photoresistor usermod
|
|
|
|
This usermod will read from an attached photoresistor sensor like the KY-018.
|
|
The luminance is displayed in both the Info section of the web UI as well as published to the `/luminance` MQTT topic, if enabled.
|
|
|
|
## Installation
|
|
|
|
Copy the example `platformio_override.ini` to the root directory. This file should be placed in the same directory as `platformio.ini`.
|
|
|
|
### Define Your Options
|
|
|
|
* `USERMOD_SN_PHOTORESISTOR` - Enables this user mod. wled00\usermods_list.cpp
|
|
* `USERMOD_SN_PHOTORESISTOR_MEASUREMENT_INTERVAL` - Number of milliseconds between measurements. Defaults to 60000 ms
|
|
* `USERMOD_SN_PHOTORESISTOR_FIRST_MEASUREMENT_AT` - Number of milliseconds after boot to take first measurement. Defaults to 20000 ms
|
|
* `USERMOD_SN_PHOTORESISTOR_REFERENCE_VOLTAGE` - Voltage supplied to the sensor. Defaults to 5v
|
|
* `USERMOD_SN_PHOTORESISTOR_ADC_PRECISION` - ADC precision. Defaults to 10 bits
|
|
* `USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE` - Resistor size, defaults to 10000.0 (10K Ohms)
|
|
* `USERMOD_SN_PHOTORESISTOR_OFFSET_VALUE` - Offset value to report on. Defaults to 25
|
|
|
|
All parameters can be configured at runtime via the Usermods settings page.
|
|
|
|
## Project link
|
|
|
|
* [QuinLED-Dig-Uno](https://quinled.info/2018/09/15/quinled-dig-uno/) - Project link
|
|
|
|
### PlatformIO requirements
|
|
|
|
If you are using `platformio_override.ini`, you should be able to refresh the task list and see your custom task, for example `env:usermod_sn_photoresistor_d1_mini`.
|
|
|
|
## Change Log
|