kopia lustrzana https://github.com/Aircoookie/WLED
58 wiersze
1.8 KiB
Markdown
58 wiersze
1.8 KiB
Markdown
# Temperature usermod
|
|
|
|
Based on the excellent `QuinLED_Dig_Uno_Temp_MQTT` usermod by srg74 and 400killer!
|
|
Reads an attached DS18B20 temperature sensor (as available on the QuinLED Dig-Uno)
|
|
Temperature is displayed in both the Info section of the web UI as well as published to the `/temperature` MQTT topic, if enabled.
|
|
May be expanded with support for different sensor types in the future.
|
|
|
|
If temperature sensor is not detected during boot, this usermod will be disabled.
|
|
|
|
Maintained by @blazoncek
|
|
|
|
## Installation
|
|
|
|
Add `Temperature` to `custom_usermods` in your platformio_override.ini.
|
|
|
|
Example **platformio_override.ini**:
|
|
|
|
```ini
|
|
[env:usermod_temperature_esp32dev]
|
|
extends = env:esp32dev
|
|
custom_usermods = ${env:esp32dev.custom_usermods}
|
|
Temperature
|
|
```
|
|
|
|
### Define Your Options
|
|
|
|
* `USERMOD_DALLASTEMPERATURE_MEASUREMENT_INTERVAL` - number of milliseconds between measurements, defaults to 60000 ms (60s)
|
|
|
|
All parameters can be configured at runtime via the Usermods settings page, including pin, temperature in degrees Celsius or Fahrenheit and measurement interval.
|
|
|
|
## Project link
|
|
|
|
* [QuinLED-Dig-Uno](https://quinled.info/2018/09/15/quinled-dig-uno/) - Project link
|
|
* [Srg74-WLED-Wemos-shield](https://github.com/srg74/WLED-wemos-shield) - another great DIY WLED board
|
|
|
|
## Change Log
|
|
|
|
2020-09-12
|
|
|
|
* Changed to use async non-blocking implementation
|
|
* Do not report erroneous low temperatures to MQTT
|
|
* Disable plugin if temperature sensor not detected
|
|
* Report the number of seconds until the first read in the info screen instead of sensor error
|
|
|
|
2021-04
|
|
|
|
* Adaptation for runtime configuration.
|
|
|
|
2023-05
|
|
|
|
* Rewrite to conform to newer recommendations.
|
|
* Recommended @blazoncek fork of OneWire for ESP32 to avoid Sensor error
|
|
|
|
2024-09
|
|
|
|
* Update OneWire to version 2.3.8, which includes stickbreaker's and garyd9's ESP32 fixes:
|
|
blazoncek's fork is no longer needed
|