Tiny changes as I walk through freehand code. These would only really
make a difference on pages with many freehand shapes.
### Change Type
- [x] `sdk` — Changes the tldraw SDK
- [x] `improvement` — Improving existing features
### Release Notes
- Improve performance of draw shapes.
Describe what your pull request does. If appropriate, add GIFs or images
showing the before and after.
### Change Type
- [x] `sdk` — Changes the tldraw SDK
- [x] `galaxy brain` — Architectural changes
### Test Plan
1. Add a step-by-step description of how to test your PR here.
2.
- [ ] Unit Tests
- [ ] End to end tests
### Release Notes
#### BREAKING CHANGES
- The `Migrations` type is now called `LegacyMigrations`.
- The serialized schema format (e.g. returned by
`StoreSchema.serialize()` and `Store.getSnapshot()`) has changed. You
don't need to do anything about it unless you were reading data directly
from the schema for some reason. In which case it'd be best to avoid
that in the future! We have no plans to change the schema format again
(this time was traumatic enough) but you never know.
- `compareRecordVersions` and the `RecordVersion` type have both
disappeared. There is no replacement. These were public by mistake
anyway, so hopefully nobody had been using it.
- `compareSchemas` is a bit less useful now. Our migrations system has
become a little fuzzy to allow for simpler UX when adding/removing
custom extensions and 3rd party dependencies, and as a result we can no
longer compare serialized schemas in any rigorous manner. You can rely
on this function to return `0` if the schemas are the same. Otherwise it
will return `-1` if the schema on the right _seems_ to be newer than the
schema on the left, but it cannot guarantee that in situations where
migration sequences have been removed over time (e.g. if you remove one
of the builtin tldraw shapes).
Generally speaking, the best way to check schema compatibility now is to
call `store.schema.getMigrationsSince(persistedSchema)`. This will throw
an error if there is no upgrade path from the `persistedSchema` to the
current version.
- `defineMigrations` has been deprecated and will be removed in a future
release. For upgrade instructions see
https://tldraw.dev/docs/persistence#Updating-legacy-shape-migrations-defineMigrations
- `migrate` has been removed. Nobody should have been using this but if
you were you'll need to find an alternative. For migrating tldraw data,
you should stick to using `schema.migrateStoreSnapshot` and, if you are
building a nuanced sync engine that supports some amount of backwards
compatibility, also feel free to use `schema.migratePersistedRecord`.
- the `Migration` type has changed. If you need the old one for some
reason it has been renamed to `LegacyMigration`. It will be removed in a
future release.
- the `Migrations` type has been renamed to `LegacyMigrations` and will
be removed in a future release.
- the `SerializedSchema` type has been augmented. If you need the old
version specifically you can use `SerializedSchemaV1`
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
This PR makes a small improvement to the speed of `getShapeAtPoint`. It
removes `Editor.getCurrentPageRenderingShapesSorted`.
### Change Type
- [x] `sdk` — Changes the tldraw SDK
- [x] `improvement` — Improving existing features
Can be useful for ad-hoc measure of performance. One is a method
decorator, which can be use on methods like so:
```typescript
@measureDuration
someLongRunningProccess() {
// ....
}
```
And the other offer more granular control. It also returns what the
callback returns, so it can be use in assignments / return statements.
```typescript
return measureCbDuration('sorting took', () => renderingShapes.sort(sortById))
```
### Change Type
<!-- ❗ Please select a 'Scope' label ❗️ -->
- [ ] `sdk` — Changes the tldraw SDK
- [ ] `dotcom` — Changes the tldraw.com web app
- [ ] `docs` — Changes to the documentation, examples, or templates.
- [ ] `vs code` — Changes to the vscode plugin
- [x] `internal` — Does not affect user-facing stuff
<!-- ❗ Please select a 'Type' label ❗️ -->
- [ ] `bugfix` — Bug fix
- [ ] `feature` — New feature
- [ ] `improvement` — Improving existing features
- [ ] `chore` — Updating dependencies, other boring stuff
- [ ] `galaxy brain` — Architectural changes
- [ ] `tests` — Changes to any test code
- [x] `tools` — Changes to infrastructure, CI, internal scripts,
debugging tools, etc.
- [ ] `dunno` — I don't know
This PR buffs input events.
## The story so far
In the olde days, we throttled events from the canvas events hook so
that a pointer event would only be sent every 1/60th of a second. This
was fine but made drawing on the iPad / 120FPS displays a little sad.
Then we removed this throttle. It seemed fine! Drawing at 120FPS was
great. We improved some rendering speeds and tightened some loops so
that the engine could keep up with 2x the number of points in a line.
Then we started noticing that iPads and other screens could start
choking on events as it received new inputs and tried to process and
render inputs while still recovering from a previous dropped frame. Even
worse, on iPad the work of rendering at 120FPS was causing the browser
to throttle the app after some sustained drawing. Yikes!
### Batching
I did an experimental PR (#3180) to bring back batching but do it in the
editor instead. What we would do is: rather than immediately processing
an event when we get it, we would instead put the event into a buffer.
On the next 60FPS tick, we would flush the buffer and process all of the
events. We'd have them all in the same transaction so that the app would
only render once.
### Render batching?
We then tried batching the renders, so that the app would only ever
render once per (next) frame. This added a bunch of complexity around
events that needed to happen synchronously, such as writing text in a
text field. Some inputs could "lag" in a way familiar to anyone who's
tried to update an input's state asynchronously. So we backed out of
this.
### Coalescing?
Another idea from @ds300 was to "coalesce" the events. This would be
useful because, while some interactions like drawing would require the
in-between frames in order to avoid data loss, most interactions (like
resizing) didn't actually need the in-between frames, they could just
use the last input of a given type.
Coalescing turned out to be trickier than we thought, though. Often a
state node required information from elsewhere in the app when
processing an event (such as camera position or page point, which is
derived from the camera position), and so the coalesced events would
need to also include this information or else the handlers wouldn't work
the way they should when processing the "final" event during a tick.
So we backed out of the coalescing strategy for now. Here's the [PR that
removes](937469d69d)
it.
### Let's just buffer the fuckers
So this PR now should only include input buffering.
I think there are ways to achieve the same coalescing-like results
through the state nodes, which could gather information during the
`onPointerMove` handler and then actually make changes during the
`onTick` handler, so that the changes are only done as many time as
necessary. This should help with e.g. resizing lots of shapes at once.
But first let's land the buffering!
---
Mitja's original text:
This PR builds on top of Steve's [experiment
PR](https://github.com/tldraw/tldraw/pull/3180) here. It also adds event
coalescing for [`pointerMove`
events](https://github.com/tldraw/tldraw/blob/mitja/input-buffering/packages/editor/src/lib/editor/Editor.ts#L8364-L8368).
The API is [somewhat similar
](https://developer.mozilla.org/en-US/docs/Web/API/PointerEvent/getCoalescedEvents)
to `getCoalescedEvent`. In `StateNodes` we register an `onPointerMove`
handler. When the event happens it gets called with the event `info`.
There's now an additional field on `TLMovePointerEvent` called
`coalescedInfo` which includes all the events. It's then on the user to
process all of these.
I decided on this API since it allows us to only expose one event
handler, but it still gives the users access to all events if they need
them.
We would otherwise either need to:
- Expose two events (coalesced and non-coalesced one and complicate the
api) so that state nodes like Resizing would not be triggered for each
pointer move.
- Offer some methods on the editor that would allow use to get the
coalesced information. Then the nodes that need that info could request
it. I [tried
this](9ad973da3a (diff-32f1de9a5a9ec72aa49a8d18a237fbfff301610f4689a4af6b37f47af435aafcR67)),
but it didn't feel good.
This also complicated the editor inputs. The events need to store
information about the event (like the mouse position when the event
happened for `onPointerMove`). But we cannot immediately update inputs
when the event happens. To make this work for `pointerMove` events I've
added `pagePoint`. It's
[calculated](https://github.com/tldraw/tldraw/pull/3223/files#diff-980beb0aa0ee9aa6d1cd386cef3dc05a500c030638ffb58d45fd11b79126103fR71)
when the event triggers and then consumers can get it straight from the
event (like
[Drawing](https://github.com/tldraw/tldraw/pull/3223/files#diff-32f1de9a5a9ec72aa49a8d18a237fbfff301610f4689a4af6b37f47af435aafcR104)).
### Change Type
<!-- ❗ Please select a 'Scope' label ❗️ -->
- [x] `sdk` — Changes the tldraw SDK
- [ ] `dotcom` — Changes the tldraw.com web app
- [ ] `docs` — Changes to the documentation, examples, or templates.
- [ ] `vs code` — Changes to the vscode plugin
- [ ] `internal` — Does not affect user-facing stuff
<!-- ❗ Please select a 'Type' label ❗️ -->
- [ ] `bugfix` — Bug fix
- [ ] `feature` — New feature
- [x] `improvement` — Improving existing features
- [ ] `chore` — Updating dependencies, other boring stuff
- [ ] `galaxy brain` — Architectural changes
- [ ] `tests` — Changes to any test code
- [ ] `tools` — Changes to infrastructure, CI, internal scripts,
debugging tools, etc.
- [ ] `dunno` — I don't know
### Test Plan
1. Add a step-by-step description of how to test your PR here.
4.
- [ ] Unit Tests
- [ ] End to end tests
### Release Notes
- Add a brief release note for your PR here.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
Currently, we only use native `structuredClone` in the browser, falling
back to `JSON.parse(JSON.stringify(...))` elsewhere, despite Node
supporting `structuredClone` [since
v17](https://developer.mozilla.org/en-US/docs/Web/API/structuredClone)
and Cloudflare Workers supporting it [since
2022](https://blog.cloudflare.com/standards-compliant-workers-api/).
This PR adjusts our shim to use the native `structuredClone` on all
platforms, if available.
Additionally, `jsdom` doesn't implement `structuredClone`, a bug [open
since 2022](https://github.com/jsdom/jsdom/issues/3363). This PR patches
`jsdom` environment in all packages/apps that use it for tests.
Also includes a driveby removal of `deepCopy`, a function that is
strictly inferior to `structuredClone`.
### Change Type
<!-- ❗ Please select a 'Scope' label ❗️ -->
- [x] `sdk` — Changes the tldraw SDK
- [x] `dotcom` — Changes the tldraw.com web app
- [ ] `docs` — Changes to the documentation, examples, or templates.
- [ ] `vs code` — Changes to the vscode plugin
- [ ] `internal` — Does not affect user-facing stuff
<!-- ❗ Please select a 'Type' label ❗️ -->
- [ ] `bugfix` — Bug fix
- [ ] `feature` — New feature
- [x] `improvement` — Improving existing features
- [x] `chore` — Updating dependencies, other boring stuff
- [ ] `galaxy brain` — Architectural changes
- [ ] `tests` — Changes to any test code
- [ ] `tools` — Changes to infrastructure, CI, internal scripts,
debugging tools, etc.
- [ ] `dunno` — I don't know
### Test Plan
1. A smoke test would be enough
- [ ] Unit Tests
- [x] End to end tests
Before
After
The probelm was manifesting because our camera updates were not
throttled and our render tick was on a different tick timeline to our
tick manager. Fixing the latter gets rid of the lag without requiring us
to throttle the camera updates.
### Change Type
<!-- ❗ Please select a 'Scope' label ❗️ -->
- [x] `sdk` — Changes the tldraw SDK
- [ ] `dotcom` — Changes the tldraw.com web app
- [ ] `docs` — Changes to the documentation, examples, or templates.
- [ ] `vs code` — Changes to the vscode plugin
- [ ] `internal` — Does not affect user-facing stuff
<!-- ❗ Please select a 'Type' label ❗️ -->
- [x] `bugfix` — Bug fix
### Test Plan
1. Add a step-by-step description of how to test your PR here.
2.
- [ ] Unit Tests
- [ ] End to end tests
### Release Notes
- Add a brief release note for your PR here.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
We had a couple regressions in #3110: first a missing `await` was
causing fonts not to get properly embedded in exports. second, some
`readAsText` calls were replaced with `readAsDataURL` calls.
### Change Type
<!-- ❗ Please select a 'Scope' label ❗️ -->
- [x] `sdk` — Changes the tldraw SDK
- [ ] `dotcom` — Changes the tldraw.com web app
- [ ] `docs` — Changes to the documentation, examples, or templates.
- [ ] `vs code` — Changes to the vscode plugin
- [ ] `internal` — Does not affect user-facing stuff
<!-- ❗ Please select a 'Type' label ❗️ -->
- [x] `bugfix` — Bug fix
- [ ] `feature` — New feature
- [ ] `improvement` — Improving existing features
- [ ] `chore` — Updating dependencies, other boring stuff
- [ ] `galaxy brain` — Architectural changes
- [ ] `tests` — Changes to any test code
- [ ] `tools` — Changes to infrastructure, CI, internal scripts,
debugging tools, etc.
- [ ] `dunno` — I don't know
This PR does a few things to help with performance:
1. Instead of doing changes on raf we now do them 60 times per second.
This limits the number of updates on high refresh rate screens like the
iPad. With the current code this only applied to the history updates (so
when you subscribed to the updates), but the next point takes this a bit
futher.
2. We now trigger react updates 60 times per second. This is a change in
`useValue` and `useStateTracking` hooks.
3. We now throttle the inputs (like the `pointerMove`) in state nodes.
This means we batch multiple inputs and only apply them at most 60 times
per second.
We had to adjust our own tests to pass after this change so I marked
this as major as it might require the users of the library to do the
same.
Few observations:
- The browser calls the raf callbacks when it can. If it gets
overwhelmed it will call them further and further apart. As things call
down it will start calling them more frequently again. You can clearly
see this in the drawing example. When fps gets to a certain level we
start to get fewer updates, then fps can recover a bit. This makes the
experience quite janky. The updates can be kinda ok one second (dropping
frames, but consistently) and then they can completely stop and you have
to let go of the mouse to make them happen again. With the new logic it
seems everything is a lot more consistent.
- We might look into variable refresh rates to prevent this overtaxing
of the browser. Like when we see that the times between our updates are
getting higher we could make the updates less frequent. If we then see
that they are happening more often we could ramp them back up. I had an
[experiment for this
here](4834863966 (diff-318e71563d7c47173f89ec084ca44417cf70fc72faac85b96f48b856a8aec466L30-L35)).
Few tests below. Used 6x slowdown for these.
# Resizing
### Before
https://github.com/tldraw/tldraw/assets/2523721/798a033f-5dfa-419e-9a2d-fd8908272ba0
### After
https://github.com/tldraw/tldraw/assets/2523721/45870a0c-c310-4be0-b63c-6c92c20ca037
# Drawing
Comparison is not 100% fair, we don't store the intermediate inputs
right now. That said, tick should still only produce once update so I do
think we can get a sense of the differences.
### Before
https://github.com/tldraw/tldraw/assets/2523721/2e8ac8c5-bbdf-484b-bb0c-70c967f4541c
### After
https://github.com/tldraw/tldraw/assets/2523721/8f54b7a8-9a0e-4a39-b168-482caceb0149
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [x] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Release Notes
- Improves the performance of rendering.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
Steve tried this in #3043, but we reverted it in #3063. Steve's version
added `JSON.parse`/`JSON.stringify` to the helpers without checking for
where we were already `JSON.parse`ing (or not). In some places we just
store strings directly rather than wanting them jsonified, so in this
version we leave the jsonification to the callers - the helpers just do
the reading/writing and return the string values.
### Change Type
- [x] `patch` — Bug fix
This PR provides some safe wrappers for local storage calls. Local
storage is not available in all environments (for example, a React
Native web view). The PR also adds an eslint rule preventing direct
calls to local / session storage.
### Change Type
- [x] `patch` — Bug fix
### Release Notes
- Fixes a bug that could cause crashes in React Native webviews.
This PR bumps TypeScript to 5.3.3 and API extractor. We started getting
some weird behavior in CI due to different versions of the two
libraries, ie where the CI api.jsons would differ from those built
locally.
### Change Type
- [x] `dependencies` — Changes to package dependencies[^1]
This PR fixes a rogue structuredClone reference in the drawing state.
### Change Type
- [x] `patch` — Bug fix
### Release Notes
- Fixes a reference to structuredClone that caused a crash on older
browsers.
Currently, we type our fractional index keys as `string` and don't have
any validation for them. I'm touching some of this code for my work on
line handles and wanted to change that:
- fractional indexes are now `IndexKey`s, not `string`s. `IndexKey`s
have a brand property so can't be used interchangeably with strings
(like our IDs)
- There's a new `T.indexKey` validator which we can use in our
validations to make sure we don't end up with nonsense keys.
This PR is part of a series - please don't merge it until the things
before it have landed!
1. #2827 (you are here)
2. #2831
3. #2793
4. #2841
5. #2845
### Change Type
- [x] `patch` — Bug fix
### Test Plan
1. Mostly relying on unit & end to end tests here - no user facing
changes.
- [x] Unit Tests
As discussed offline, just making `yarn test` do what we expect it to.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
Biome as it is now didn't work out for us 😢
Summary for posterity:
* it IS much, much faster, fast enough to skip any sort of caching
* we couldn't fully replace Prettier just yet. We use Prettier
programmatically to format code in docs, and Biome's JS interface is
officially alpha and [had legacy peer deps
set](https://github.com/biomejs/biome/pull/1756) (which would fail our
CI build as we don't allow installation warnings)
* ternary formatting differs from Prettier, leading to a large diff
https://github.com/biomejs/biome/issues/1661
* import sorting differs from Prettier's
`prettier-plugin-organize-imports`, making the diff even bigger
* the deal breaker is a multi-second delay on saving large files (for us
it's
[Editor.ts](https://github.com/tldraw/tldraw/blob/main/packages/editor/src/lib/editor/Editor.ts))
in VSCode when import sorting is enabled. There is a seemingly relevant
Biome issue where I posted a small summary of our findings:
https://github.com/biomejs/biome/issues/1569#issuecomment-1930411623
Further actions:
* reevaluate in a few months as Biome matures
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package
Taking the opportunity for some last-minute low-consequence breaking
changes before 2.0, this diff does some prep work for adding a new
snapping API by making the distinction between the two types of snapping
a bit clearer and cleaning up some naming.
- `SnapManager` has had most of the actual snapping logic moved into two
properties: `shapeBounds` (for snapping shape bounds on translate and
resize) and `handles` (for snapping handles)
- `SnapLine`s are renamed to `SnapIndicator`s. The 'line' name was a bit
confusing because not all of these indicators are lines (the new vertex
snap type will be a single point)
I'm not too worried about this being a breaking change as it touches an
area of the API that I'd be very surprised if more than a couple of
people were using.
### Change Type
- [x] `major` — Breaking change
### Test Plan
- No user-facing changes.
### Release Notes
- `SnapLine`s are now called `SnapIndicator`s
- Snapping methods moved from `editor.snaps` to
`editor.snaps.shapeBounds` and `editor.snaps.handles` depending on the
type of snapping you're trying to do.
Biome seems to be MUCH faster than Prettier. Unfortunately, it
introduces some formatting changes around the ternary operator, so we
have to update files in the repo. To make revert easier if we need it,
the change is split into two PRs. This PR introduces a Biome CI check
and reformats all files accordingly.
## Change Type
- [x] `minor` — New feature
Our snapshot tests have been acting strange. It turned out that there's
a change in prettier that is incompatible with prettier's inline
snapshots.
This PR:
- updates jest to a compatible alpha
- updates dependencies
### Change Type
- [x] `tests` — Changes to any test code only[^2]
### Test Plan
- [x] Unit Tests
@si14 you might know a better way to wire this up! lemme know if there's
something more clever here.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
### Release Notes
- Adds easier testing command for individual packages.
(gif is with 6x CPU throttling to make the effect more visible)
This is the first of a few diffs I'm working on to make dropping images
onto the canvas feel a lot faster.
There are three main changes here:
1. We operate on `Blob`s and `File`s rather than data urls. This saves a
fair bit on converting to/from base64 all the time. I've updated our
`MediaHelper` APIs to encourage the same in consumers.
2. We only check the max canvas size (slow) if images are above a
certain dimension that we consider "safe" (8k x 8k)
3. Switching from the `downscale` npm library to canvas native
downscaling. that library claims to give better results than the
browser, but hasn't been updated in ~7 years. in modern browsers, we can
opt-in to native high-quality image smoothing to achieve similar results
much faster than with an algorithm implemented in pure JS.
I want to follow this up with a system to show image placeholders whilst
we're waiting for long-running operations like resizing etc but i'm
going to split that out into its own diff as it'll involve some fairly
complex changes to the history management API.
### Change Type
- [x] `major` — Breaking change
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Tested manually, unit tests & end-to-end tests pass
Adds validation for urls we use for our shapes and assets. This PR
includes a migration so we should check that existing rooms still load
correctly. There might be some that won't, but that means that they had
invalid url set.
### Change Type
- [x] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Existing rooms should still load correctly (there should be no
validation errors).
2. Adding new images and videos should also work (test both local and
multiplayer rooms as they handle assets differently).
- [x] Unit Tests
- [ ] End to end tests
### Release Notes
- Add validation to urls.
---------
Co-authored-by: alex <alex@dytry.ch>
Changes `TRANDEMARK` -> `TRADEMARK` in docs links so they work.
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [x] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
- Confirm the links now work.
### Release Notes
- Fixes broken links in a number of docs files.
When we handle pixel ratios in .png files, we were rounding the pixel
ratio to the nearest integer. This mean that if an image had a pixel
ration less than 0.5, it would get rounded to zero. This would cause a
divide-by-zero on the width & height of the image which would crash the
app.
This has a couple fixes:
- we ignore pixel ratios less that 1
- we perform rounding _after_ we apply the pixel ratio to the
width/height
### Change Type
- [x] `patch` — Bug fix
### Test Plan
1. Upload this funky image:
2. Check the app doesn't crash
This PR updates the licenses across tldraw to a bespoke tldraw license.
The idea here is leverage dual licensing for revenue from companies
using tldraw. The source code and its distributions are provided under a
non-commercial license (tldraw) while we offer to sell / give out an
alternative exclusive-use license for companies who wish to use the
product for commercial purposes.
- [x] Add new license
- [x] Change licenses in package.jsons
- [x] Update READMEs
- [x] Update docs (separate repo PR)
- [x] Have alternative license in hand (US)
- [ ] Have alternative license in hand (UK)
- [x] Have sales contract in hand (US)
- [ ] Have sales contract in hand (UK)
### Change Type
- [x] `major` — Breaking change
This is an attempt at #1989. The big issue there is when `shapeUtils`
change when you're relying on tldraw to provide you with the store
instead of providing your own. Our `useTLStore` component had a bug
where it would rely on effects & a ref to detect when its options had
changed whilst still scheduling updates. Fresh opts would come in, but
they'd be different from the ones in the ref, so we'd schedule an
update, so the opts would come in again, but they'd still be different
as we hadn't run effects yet, and we'd schedule an update again (and so
on).
This diff fixes that by storing the previous opts in state instead of a
ref, so they're updating in lockstep with the store itself. this
prevents the update loop.
There are still situations where we can get into loops if the developer
is passing in custom tools, shapeUtils, or components but not memoising
them or defining them outside of react. As a DX improvement, we do some
auto-memoisation of these values using shallow equality to help with
this issue.
### Change Type
- [x] `patch` — Bug fix
### Test Plan
- [x] Unit Tests
### Release Notes
- Fixes a bug that could cause crashes due to a re-render loop with HMR
#1989
follow up to #2189
adds runtime warnings for deprecated fields. cleans up remaining fields
and usages. Adds a lint rule to prevent access to deprecated fields.
Adds a lint rule to prevent using getters.
### Change Type
- [x] `patch` — Bug fix
This switches us from the 'alpha' to 'beta' prerelease tag. After we
make our first deploy folks will be able to install the latest version
by doing `npm install @tldraw/tldraw@beta`.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
huppy-bot[bot]