Repetier-Firmware
0.91
|
Go to the source code of this file.
Defines | |
#define | ARCH_AVR 1 |
#define | ARCH_ARM 2 |
#define | CURRENT_CONTROL_MANUAL 1 |
#define | CURRENT_CONTROL_DIGIPOT 2 |
#define | CURRENT_CONTROL_LTC2600 3 |
#define | KNOWN_BOARD 1 |
#define | X_STEP_PIN 2 |
#define | X_DIR_PIN 3 |
#define | X_ENABLE_PIN -1 |
#define | X_MIN_PIN 4 |
#define | X_MAX_PIN 9 |
#define | Y_STEP_PIN 10 |
#define | Y_DIR_PIN 7 |
#define | Y_ENABLE_PIN -1 |
#define | Y_MIN_PIN 8 |
#define | Y_MAX_PIN 13 |
#define | Z_STEP_PIN 19 |
#define | Z_DIR_PIN 18 |
#define | Z_ENABLE_PIN 5 |
#define | Z_MIN_PIN 17 |
#define | Z_MAX_PIN 16 |
#define | E0_STEP_PIN 11 |
#define | E0_DIR_PIN 12 |
#define | E0_ENABLE_PIN -1 |
#define | SDPOWER -1 |
#define | SDSS -1 |
#define | LED_PIN -1 |
#define | FAN_PIN -1 |
#define | PS_ON_PIN 15 |
#define | HEATER_0_PIN 6 |
#define | TEMP_0_PIN 0 |
#define | E2_PINS |
#define | SENSITIVE_PINS |
#define ARCH_ARM 2 |
#define ARCH_AVR 1 |
#define CURRENT_CONTROL_DIGIPOT 2 |
#define CURRENT_CONTROL_LTC2600 3 |
#define CURRENT_CONTROL_MANUAL 1 |
#define E0_DIR_PIN 12 |
#define E0_ENABLE_PIN -1 |
#define E0_STEP_PIN 11 |
#define E2_PINS |
#define FAN_PIN -1 |
#define HEATER_0_PIN 6 |
#define KNOWN_BOARD 1 |
#define LED_PIN -1 |
#define PS_ON_PIN 15 |
#define SDPOWER -1 |
#define SDSS -1 |
#define SENSITIVE_PINS |
{0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \ HEATER_0_PIN, HEATER_1_PIN, FAN_PIN, E0_PINS E1_PINS E2_PINS TEMP_0_PIN, TEMP_1_PIN,SDSS }
#define TEMP_0_PIN 0 |
#define X_DIR_PIN 3 |
#define X_ENABLE_PIN -1 |
#define X_MAX_PIN 9 |
#define X_MIN_PIN 4 |
#define X_STEP_PIN 2 |
#define Y_DIR_PIN 7 |
#define Y_ENABLE_PIN -1 |
#define Y_MAX_PIN 13 |
#define Y_MIN_PIN 8 |
#define Y_STEP_PIN 10 |
#define Z_DIR_PIN 18 |
#define Z_ENABLE_PIN 5 |
#define Z_MAX_PIN 16 |
#define Z_MIN_PIN 17 |
#define Z_STEP_PIN 19 |