kopia lustrzana https://github.com/jgromes/RadioLib
Updated Default configuration (markdown)
Jan Gromeš
rodzic
6ad55d68bc
commit
5d3aac0d98
|
|
@ -12,26 +12,26 @@ Legend:
|
|||
|
||||
### CC1101
|
||||
* Begin method:
|
||||
* Carrier frequency: 868.0 MHz
|
||||
* Bit rate: 4.8 kbps
|
||||
* Carrier frequency: 434.0 MHz
|
||||
* Bit rate: 48.0 kbps
|
||||
* Frequency deviation: 48.0 kHz (single-sideband)
|
||||
* Receiver bandwidth: 325.0 kHz
|
||||
* Output power: 0 dBm
|
||||
* Preamble length: 4 bytes
|
||||
* Receiver bandwidth: 125.0 kHz
|
||||
* Output power: 10 dBm
|
||||
* Preamble length: 16 bits
|
||||
* Other:
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: whitening (x^9 + x^5 + 1 polynomial)
|
||||
* Packet length mode: variable, maximum of CC1101_MAX_PACKET_LENGTH bytes (length byte included in packet)
|
||||
* Sync word: 0xD3 0x91, 0 error bits, carrier sense above threshold not required
|
||||
* Sync word: 0x12 0xAD, 0 error bits, carrier sense above threshold not required
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* Inaccessible: -
|
||||
|
||||
Equivalent to:
|
||||
```c++
|
||||
CC1101::begin(868.0, 4.8, 48.0, 325.0, 0, 4);
|
||||
CC1101::setDataShaping(0);
|
||||
CC1101::setEncoding(2);
|
||||
CC1101::begin(434.0, 48.0, 48.0, 125.0, 10, 16);
|
||||
CC1101::variablePacketLengthMode(CC1101_MAX_PACKET_LENGTH);
|
||||
CC1101::setSyncWord(0xD3, 0x91, 0, false);
|
||||
CC1101::setSyncWord(0x12, 0xAD, 0, false);
|
||||
CC1101::setDataShaping(RADIOLIB_SHAPING_NONE);
|
||||
CC1101::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
```
|
||||
|
||||
### nRF24
|
||||
|
|
@ -63,10 +63,11 @@ nRF24::setAutoAck(true);
|
|||
* Bit rate: 48.0 kbps
|
||||
* Frequency deviation: 50.0 kHz (single-sideband)
|
||||
* Receiver bandwidth: 125.0 kHz
|
||||
* Output power: 13 dBm
|
||||
* Output power: 10 dBm
|
||||
* Preamble length: 16 bits
|
||||
* Other:
|
||||
* Packet length mode: variable, maximum of RF69_MAX_PACKET_LENGTH bytes (length byte included in packet)
|
||||
* Sync word: 0x2D 0x01
|
||||
* Sync word: 0x12 0xAD
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* CRC: enabled
|
||||
|
|
@ -78,12 +79,12 @@ nRF24::setAutoAck(true);
|
|||
|
||||
Equivalent to (assuming RF69):
|
||||
```c++
|
||||
RF69::begin(434.0, 48.0, 50.0, 125.0, 13);
|
||||
RF69::begin(434.0, 48.0, 50.0, 125.0, 10, 16);
|
||||
RF69::variablePacketLengthMode(RF69_MAX_PACKET_LENGTH);
|
||||
uint8_t syncWord[] = {0x2D, 0x01};
|
||||
uint8_t syncWord[] = {0x12, 0xAD};
|
||||
RF69::setSyncWord(syncWord, 2);
|
||||
RF69::setDataShaping(0);
|
||||
RF69::setEncoding(0);
|
||||
RF69::setDataShaping(RADIOLIB_SHAPING_NONE);
|
||||
RF69::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
RF69::setCrcFiltering(true);
|
||||
RF69::disableAddressFiltering();
|
||||
RF69::disableAES();
|
||||
|
|
@ -96,8 +97,9 @@ RF69::disableAES();
|
|||
* Frequency deviation: 50.0 kHz (single-sideband)
|
||||
* Receiver bandwidth: 181.1 kHz
|
||||
* Output power: 10 dBm
|
||||
* Preamble length: 16 bits
|
||||
* Other:
|
||||
* Sync word: 0x2D 0x01
|
||||
* Sync word: 0x12 0xAD
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* Inaccessible:
|
||||
|
|
@ -106,11 +108,11 @@ RF69::disableAES();
|
|||
|
||||
Equivalent to (assuming Si4432):
|
||||
```c++
|
||||
Si4432::begin(434.0, 48.0, 50.0, 181.1, 10);
|
||||
uint8_t syncWord[] = {0x2D, 0x01};
|
||||
Si4432::begin(434.0, 48.0, 50.0, 181.1, 10, 16);
|
||||
uint8_t syncWord[] = {0x12, 0xAD};
|
||||
Si443x::setSyncWord(syncWord, 2);
|
||||
Si443x::setDataShaping(0);
|
||||
Si443x::setEncoding(0);
|
||||
Si443x::setDataShaping(RADIOLIB_SHAPING_NONE);
|
||||
Si443x::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
```
|
||||
|
||||
### SX126x - LoRa modem
|
||||
|
|
@ -120,7 +122,7 @@ Si443x::setEncoding(0);
|
|||
* Spreading factor: 9
|
||||
* Coding rate: 4/7
|
||||
* Sync word: SX126X_SYNC_WORD_PRIVATE (0x12)
|
||||
* Output power: 14 dBm
|
||||
* Output power: 10 dBm
|
||||
* Over-current protection: 60.0 mA
|
||||
* Preamble length: 8 symbols
|
||||
* TCXO reference voltage: 1.6 V (SX126x module with TCXO)
|
||||
|
|
@ -134,7 +136,7 @@ Si443x::setEncoding(0);
|
|||
|
||||
Equivalent to:
|
||||
```c++
|
||||
SX126x::begin(434.0, 125.0, 9, 7, SX126X_SYNC_WORD_PRIVATE, 14, 60.0, 1.6, false);
|
||||
SX126x::begin(434.0, 125.0, 9, 7, SX126X_SYNC_WORD_PRIVATE, 10, 60.0, 8, 1.6, false);
|
||||
SX126x::setDio2AsRfSwitch(true);
|
||||
SX126x::explicitHeader();
|
||||
SX126x::setCRC(2);
|
||||
|
|
@ -146,27 +148,29 @@ SX126x::setCRC(2);
|
|||
* Bit rate: 48.0 kbps
|
||||
* Frequency deviation: 50.0 kHz (single-sideband)
|
||||
* Receiver bandwidth: 156.2 kHz
|
||||
* Output power: 14 dBm
|
||||
* Over-current protection: 60.0 mA
|
||||
* Output power: 10 dBm
|
||||
* Preamble length: 16 bits
|
||||
* Data shaping B-T product: 0.5 (GFSK)
|
||||
* TCXO reference voltage: 1.6 V (SX126x module with TCXO)
|
||||
* LDO regulator mode: disabled (SX126x module with DC-DC power supply)
|
||||
* Other:
|
||||
* DIO2 as RF switch control: enabled
|
||||
* Sync word: 0x2D 0x01
|
||||
* Packet length mode: variable, maximum of SX126X_MAX_PACKET_LENGTH bytes (length byte included in packet)
|
||||
* Encoding: whitening (x^9 + x^5 + 1 polynomial with bit order reverse, initial LFSR state 0x01FF)
|
||||
* Sync word: 0x12 0xAD
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* Over-current protection: 60.0 mA
|
||||
* DIO2 as RF switch control: enabled
|
||||
* Inaccessible: -
|
||||
|
||||
Equivalent to (assuming SX1268):
|
||||
```c++
|
||||
SX1268::beginFSK(434.0, 48.0, 156.2, 14, 60.0, 16, 0.5, false);
|
||||
SX126x::setDio2AsRfSwitch(true);
|
||||
uint8_t syncWord[] = {0x2D, 0x01};
|
||||
SX126x::setSyncWord(syncWord, 2);
|
||||
SX1268::beginFSK(434.0, 48.0, 156.2, 10, 16, 1.6, false);
|
||||
SX126x::variablePacketLengthMode(SX126X_MAX_PACKET_LENGTH);
|
||||
SX126x::setWhitening(true, 0x01FF);
|
||||
uint8_t syncWord[] = {0x12, 0xAD};
|
||||
SX126x::setSyncWord(syncWord, 2);
|
||||
SX126x::setDataShaping(RADIOLIB_SHAPING_NONE);
|
||||
SX126x::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
SX126x::setCurrentLimit(60.0);
|
||||
SX126x::setDio2AsRfSwitch(true);
|
||||
```
|
||||
|
||||
### SX127x/RFM9x - LoRa modem
|
||||
|
|
@ -196,15 +200,15 @@ SX1278::begin(434.0, 125.0, 9, 7, SX127X_SYNC_WORD, 17, 100, 8, 0);
|
|||
* Bit rate: 48.0 kbps
|
||||
* Frequency deviation: 50.0 kHz (single-sideband)
|
||||
* Receiver bandwidth: 125.0 kHz
|
||||
* Output power: 13 dBm
|
||||
* Over-current protection: 100 mA
|
||||
* Preamble length: 16 bits
|
||||
* Output power: 10 dBm
|
||||
* OOK modulation: disabled
|
||||
* Other:
|
||||
* Data shaping B-T product: 0.5 (GFSK)
|
||||
* Sync word: 0x2D 0x01
|
||||
* Packet length mode: variable, maximum of SX127X_MAX_PACKET_LENGTH bytes (length byte included in packet)
|
||||
* Encoding: whitening (x^9 + x^5 + 1 polynomial with bit order reverse, initial LFSR state 0x01FF)
|
||||
* Sync word: 0x12 0xAD
|
||||
* Data shaping B-T product: 0 (plain 2-FSK, no Gaussian filter applied)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* Over-current protection: 60 mA
|
||||
* Address filtering: disabled
|
||||
* RSSI measurement configuration: 2^(1 + 2) samples, offset 0 dBm
|
||||
* Inaccessible:
|
||||
|
|
@ -214,12 +218,13 @@ SX1278::begin(434.0, 125.0, 9, 7, SX127X_SYNC_WORD, 17, 100, 8, 0);
|
|||
|
||||
Equivalent to (assuming SX1278):
|
||||
```c++
|
||||
SX1278::beginFSK(434.0, 48.0, 125.0, 13, 100, 16, false);
|
||||
SX1278::setDataShaping(0.5);
|
||||
uint8_t syncWord[] = {0x2D, 0x01};
|
||||
SX127x::setSyncWord(syncWord, 2);
|
||||
SX1278::beginFSK(434.0, 48.0, 125.0, 10, 16, false);
|
||||
SX127x::variablePacketLengthMode(SX127X_MAX_PACKET_LENGTH);
|
||||
SX127x::setEncoding(2);
|
||||
uint8_t syncWord[] = {0x12, 0xAD};
|
||||
SX127x::setSyncWord(syncWord, 2);
|
||||
SX1278::setDataShaping(RADIOLIB_SHAPING_NONE);
|
||||
SX127x::setCurrentLimit(60);
|
||||
SX127x::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
SX127x::disableAddressFiltering();
|
||||
SX127x::setRSSIConfig(2, 0);
|
||||
```
|
||||
|
|
@ -253,21 +258,23 @@ SX128x::setCRC(2);
|
|||
* Frequency deviation: 400 kHz (single-sideband)
|
||||
* Output power: 10 dBm
|
||||
* Preamble length: 16 bits
|
||||
* Data shaping B-T product: 0.5 (GFSK)
|
||||
* Other:
|
||||
* Sync word: 0x12 0xAD
|
||||
* Data shaping B-T product: 0.5 (GFSK)
|
||||
* Encoding: NRZ (non-return to zero - no encoding)
|
||||
* CRC: enabled, 2 bytes, initial 0x1D0F, polynomial 0x1021
|
||||
* Sync word: 0x2D 0x01
|
||||
* Encoding: whitening
|
||||
* Inaccessible:
|
||||
* Packet length mode: variable, maximum of SX128X_MAX_PACKET_LENGTH bytes (length byte included in packet)
|
||||
* LDO regulator mode: disabled (SX128x module with DC-DC power supply)
|
||||
|
||||
Equivalent to:
|
||||
```c++
|
||||
SX128x::beginFSK(2400.0, 800, 400, 10, 16, 0.5);
|
||||
SX128x::setCRC(2, 0x1D0F, 0x1021);
|
||||
uint8_t syncWord[] = {0x2D, 0x01};
|
||||
SX128x::beginGFSK(2400.0, 800, 400, 10, 16);
|
||||
uint8_t syncWord[] = {0x12, 0xAD};
|
||||
SX128x::setSyncWord(syncWord, 2);
|
||||
SX128x::setEncoding(2);
|
||||
SX128x::setDataShaping(RADIOLIB_SHAPING_0_5);
|
||||
SX128x::setEncoding(RADIOLIB_ENCODING_NRZ);
|
||||
SX128x::setCRC(2, 0x1D0F, 0x1021);
|
||||
```
|
||||
|
||||
### SX128x - BLE modem
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue