kopia lustrzana https://github.com/jgromes/RadioLib
1093 wiersze
71 KiB
C
1093 wiersze
71 KiB
C
#if !defined(_RADIOLIB_BUILD_OPTIONS_H)
|
|
#define _RADIOLIB_BUILD_OPTIONS_H
|
|
|
|
#if ARDUINO >= 100
|
|
// Arduino build
|
|
#include "Arduino.h"
|
|
#define RADIOLIB_BUILD_ARDUINO
|
|
#else
|
|
// generic build
|
|
#define RADIOLIB_BUILD_GENERIC
|
|
#endif
|
|
|
|
#if defined(RADIOLIB_BUILD_ARDUINO)
|
|
|
|
/*
|
|
* Platform-specific configuration.
|
|
*
|
|
* RADIOLIB_PLATFORM - platform name, used in debugging to quickly check the correct platform is detected.
|
|
* RADIOLIB_PIN_TYPE - which type should be used for pin numbers in functions like digitalRead().
|
|
* RADIOLIB_PIN_MODE - which type should be used for pin modes in functions like pinMode().
|
|
* RADIOLIB_PIN_STATUS - which type should be used for pin values in functions like digitalWrite().
|
|
* RADIOLIB_INTERRUPT_STATUS - which type should be used for pin changes in functions like attachInterrupt().
|
|
* RADIOLIB_DIGITAL_PIN_TO_INTERRUPT - function/macro to be used to convert digital pin number to interrupt pin number.
|
|
* RADIOLIB_NC - alias for unused pin, usually the largest possible value of RADIOLIB_PIN_TYPE.
|
|
* RADIOLIB_DEFAULT_SPI - default SPIClass instance to use.
|
|
* RADIOLIB_NONVOLATILE - macro to place variable into program storage (usually Flash).
|
|
* RADIOLIB_NONVOLATILE_READ_BYTE - function/macro to read variables saved in program storage (usually Flash).
|
|
* RADIOLIB_TYPE_ALIAS - construct to create an alias for a type, usually vai the `using` keyword.
|
|
* RADIOLIB_TONE_UNSUPPORTED - some platforms do not have tone()/noTone(), which is required for AFSK.
|
|
* RADIOLIB_BUILTIN_MODULE - some platforms have a builtin radio module on fixed pins, this macro is used to specify that pinout.
|
|
*
|
|
* In addition, some platforms may require RadioLib to disable specific drivers (such as ESP8266).
|
|
*
|
|
* Users may also specify their own configuration by uncommenting the RADIOLIB_CUSTOM_ARDUINO,
|
|
* and then specifying all platform parameters in the section below. This will override automatic
|
|
* platform detection.
|
|
*/
|
|
|
|
// uncomment to enable custom platform definition
|
|
//#define RADIOLIB_CUSTOM_ARDUINO
|
|
|
|
#if defined(RADIOLIB_CUSTOM_ARDUINO)
|
|
// name for your platform
|
|
#define RADIOLIB_PLATFORM "Custom"
|
|
|
|
// the following parameters must always be defined
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
// the following are signatures of Arduino API functions of the custom platform
|
|
// for example, pinMode on Arduino Uno is defined as void pinMode(uint8_t pin, uint8_t mode)
|
|
// all of the callbacks below are taken from Arduino Uno
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t interruptNum, void (*userFunc)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
// the following must be defined if the Arduino core does not support tone function
|
|
//#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
// some of RadioLib drivers may be excluded, to prevent collisions with platforms (or to speed up build process)
|
|
// the following is a complete list of all possible exclusion macros, uncomment any of them to disable that driver
|
|
// NOTE: Some of the exclusion macros are dependent on each other. For example, it is not possible to exclude RF69
|
|
// while keeping SX1231 (because RF69 is the base class for SX1231). The dependency is always uni-directional,
|
|
// so excluding SX1231 and keeping RF69 is valid.
|
|
//#define RADIOLIB_EXCLUDE_CC1101
|
|
//#define RADIOLIB_EXCLUDE_NRF24
|
|
//#define RADIOLIB_EXCLUDE_RF69
|
|
//#define RADIOLIB_EXCLUDE_SX1231 // dependent on RADIOLIB_EXCLUDE_RF69
|
|
//#define RADIOLIB_EXCLUDE_SI443X
|
|
//#define RADIOLIB_EXCLUDE_RFM2X // dependent on RADIOLIB_EXCLUDE_SI443X
|
|
//#define RADIOLIB_EXCLUDE_SX127X
|
|
//#define RADIOLIB_EXCLUDE_RFM9X // dependent on RADIOLIB_EXCLUDE_SX127X
|
|
//#define RADIOLIB_EXCLUDE_SX126X
|
|
//#define RADIOLIB_EXCLUDE_STM32WLX // dependent on RADIOLIB_EXCLUDE_SX126X
|
|
//#define RADIOLIB_EXCLUDE_SX128X
|
|
//#define RADIOLIB_EXCLUDE_AFSK
|
|
//#define RADIOLIB_EXCLUDE_AX25
|
|
//#define RADIOLIB_EXCLUDE_HELLSCHREIBER
|
|
//#define RADIOLIB_EXCLUDE_MORSE
|
|
//#define RADIOLIB_EXCLUDE_RTTY
|
|
//#define RADIOLIB_EXCLUDE_SSTV
|
|
//#define RADIOLIB_EXCLUDE_DIRECT_RECEIVE
|
|
|
|
#else
|
|
#if defined(__AVR__) && !(defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(ARDUINO_ARCH_MEGAAVR))
|
|
// Arduino AVR boards (except for megaAVR) - Uno, Mega etc.
|
|
#define RADIOLIB_PLATFORM "Arduino AVR"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t interruptNum, void (*userFunc)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ESP8266)
|
|
// ESP8266 boards
|
|
#define RADIOLIB_PLATFORM "ESP8266"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t pin, void (*)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ESP32)
|
|
// ESP32 boards
|
|
#define RADIOLIB_PLATFORM "ESP32"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// ESP32 doesn't support tone(), but it can be emulated via LED control peripheral
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
#define RADIOLIB_TONE_ESP32_CHANNEL (1)
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, void)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, void)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t pin, void (*)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32_t us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_STM32)
|
|
// official STM32 Arduino core (https://github.com/stm32duino/Arduino_Core_STM32)
|
|
#define RADIOLIB_PLATFORM "Arduino STM32 (official)"
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint32_t dwPin, uint32_t dwMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint32_t dwPin, uint32_t dwVal)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint32_t ulPin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin, bool destruct)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint32_t pin, callback_function_t callback, uint32_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint32_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32_t us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint32_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint32_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t pin, uint32_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(SAMD_SERIES)
|
|
// Adafruit SAMD boards (M0 and M4)
|
|
#define RADIOLIB_PLATFORM "Adafruit SAMD"
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint32_t dwPin, uint32_t dwMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint32_t dwPin, uint32_t dwVal)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint32_t ulPin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint32_t _pin, uint32_t frequency, uint32_t duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint32_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint32_t pin, voidFuncPtr callback, uint32_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint32_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long dwMs)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t pin, uint32_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_SAMD)
|
|
// Arduino SAMD (Zero, MKR, etc.)
|
|
#define RADIOLIB_PLATFORM "Arduino SAMD"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pinNumber, PinMode pinMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pinNumber, PinStatus status)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pinNumber)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, unsigned char outputPin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t outputPin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t pin, voidFuncPtr callback, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, pin_size_t pin, uint8_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(__SAM3X8E__)
|
|
// Arduino Due
|
|
#define RADIOLIB_PLATFORM "Arduino Due"
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint32_t dwPin, uint32_t dwMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint32_t dwPin, uint32_t dwVal)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint32_t ulPin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, void)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, void)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint32_t pin, void (*callback)(void), uint32_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint32_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t dwMs)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32_t usec)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint32_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint32_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t pin, uint32_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif (defined(NRF52832_XXAA) || defined(NRF52840_XXAA)) && !defined(ARDUINO_ARDUINO_NANO33BLE)
|
|
// Adafruit nRF52 boards
|
|
#define RADIOLIB_PLATFORM "Adafruit nRF52"
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint32_t dwPin, uint32_t dwMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint32_t dwPin, uint32_t dwVal)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint32_t ulPin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (int, attachInterrupt, uint32_t pin, voidFuncPtr callback, uint32_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint32_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t dwMs)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32_t usec)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint32_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint32_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t pin, uint32_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARC32_TOOLS)
|
|
// Intel Curie
|
|
#define RADIOLIB_PLATFORM "Intel Curie"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint32_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint32_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint32_t pin, void (*callback)(void), uint32_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint32_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t dwMs)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32_t dwUs)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint64_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint64_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t pin, uint32_t state, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(PORTDUINO)
|
|
// Arduino megaAVR boards - Uno Wifi Rev.2, Nano Every
|
|
#define RADIOLIB_PLATFORM "Arduino megaAVR"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, PinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t pin, void (*userFunc)(void), PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_APOLLO3)
|
|
// Sparkfun Apollo3 boards
|
|
#define RADIOLIB_PLATFORM "Sparkfun Apollo3"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE Arduino_PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pinName, Arduino_PinMode pinMode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pinName, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pinName)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t interruptNumber, voidFuncPtr callback, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t interruptNumber)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, pin_size_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARDUINO_NANO33BLE)
|
|
// Arduino Nano 33 BLE
|
|
#define RADIOLIB_PLATFORM "Arduino Nano 33 BLE"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
#define RADIOLIB_MBED_TONE_OVERRIDE
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pin, PinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pin, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t interruptNum, voidFuncPtr func, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, pin_size_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4)
|
|
// Arduino Portenta H7
|
|
#define RADIOLIB_PLATFORM "Portenta H7"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
#define RADIOLIB_MBED_TONE_OVERRIDE
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pin, PinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pin, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t interruptNum, voidFuncPtr func, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, pin_size_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(__STM32F4__) || defined(__STM32F1__)
|
|
// Arduino STM32 core by Roger Clark (https://github.com/rogerclarkmelbourne/Arduino_STM32)
|
|
#define RADIOLIB_PLATFORM "STM32duino (unofficial)"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE WiringPinMode
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS ExtIntTriggerMode
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8 pin, WiringPinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8 pin, uint8 val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (uint32_t, digitalRead, uint8 pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint32_t _pin, uint32_t frequency, uint32_t duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint32_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8 pin, voidFuncPtr handler, ExtIntTriggerMode mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8 pin)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint32 us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint32_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint32_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint32_t ulPin, uint32_t ulState, uint32_t ulTimeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_MEGAAVR)
|
|
// MegaCoreX by MCUdude (https://github.com/MCUdude/MegaCoreX)
|
|
#define RADIOLIB_PLATFORM "MegaCoreX"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (uint8_t, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t pin, void (*userFunc)(void), uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_MBED_RP2040)
|
|
// Raspberry Pi Pico (official mbed core)
|
|
#define RADIOLIB_PLATFORM "Raspberry Pi Pico"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino mbed OS boards have a really bad tone implementation which will crash after a couple seconds
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
#define RADIOLIB_MBED_TONE_OVERRIDE
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pin, PinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pin, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t interruptNum, voidFuncPtr func, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, pin_size_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(ARDUINO_ARCH_RP2040)
|
|
// Raspberry Pi Pico (unofficial core)
|
|
#define RADIOLIB_PLATFORM "Raspberry Pi Pico (unofficial)"
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, pin_size_t pin, PinMode mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, pin_size_t pin, PinStatus val)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (PinStatus, digitalRead, pin_size_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, pin_size_t interruptNum, voidFuncPtr func, PinStatus mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, pin_size_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, pin_size_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#elif defined(__ASR6501__) || defined(ARDUINO_ARCH_ASR650X) || defined(DARDUINO_ARCH_ASR6601)
|
|
// CubeCell
|
|
#define RADIOLIB_PLATFORM "CubeCell"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE PINMODE
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS IrqModes
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, PINMODE mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin_name, uint8_t level)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (uint8_t, digitalRead, uint8_t pin_name)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, void)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, void)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t pin_name, GpioIrqHandler GpioIrqHandlerCallback, IrqModes interrupt_mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t pin_name)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t milliseconds)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, uint16 microseconds)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (uint32_t, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (uint32_t, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (uint32_t, pulseIn, uint8_t pin_name, uint8_t mode, uint32_t timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
// provide an easy access to the on-board module
|
|
#include "board-config.h"
|
|
#define RADIOLIB_BUILTIN_MODULE RADIO_NSS, RADIO_DIO_1, RADIO_RESET, RADIO_BUSY
|
|
|
|
// CubeCell doesn't seem to define nullptr, let's do something like that now
|
|
#define nullptr NULL
|
|
|
|
// ... and also defines pinMode() as a macro, which is by far the stupidest thing I have seen on Arduino
|
|
#undef pinMode
|
|
|
|
// ... and uses an outdated GCC which does not support type aliases
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) typedef class type alias;
|
|
|
|
// ... and it also has no tone(). This platform was designed by an idiot.
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
// ... AND as the (hopefully) final nail in the coffin, IT F*CKING DEFINES YIELD() AS A MACRO THAT DOES NOTHING!!!
|
|
#define RADIOLIB_YIELD_UNSUPPORTED
|
|
#if defined(yield)
|
|
#undef yield
|
|
#endif
|
|
|
|
#elif defined(RASPI)
|
|
// RaspiDuino framework (https://github.com/me-no-dev/RasPiArduino)
|
|
#define RADIOLIB_PLATFORM "RasPiArduino"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t interruptNum, void (*userFunc)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, uint32_t ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
// let's start off easy - no tone on this platform, that can happen
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
// hmm, no yield either - weird on something like Raspberry PI, but sure, we can handle it
|
|
#define RADIOLIB_YIELD_UNSUPPORTED
|
|
|
|
// aight, getting to the juicy stuff - PGM_P seems missing, that's the first time
|
|
#define PGM_P const char *
|
|
|
|
// ... and for the grand finale, we have millis() and micros() DEFINED AS MACROS!
|
|
#if defined(millis)
|
|
#undef millis
|
|
inline unsigned long millis() { return((unsigned long)(STCV / 1000)); };
|
|
#endif
|
|
|
|
#if defined(micros)
|
|
#undef micros
|
|
inline unsigned long micros() { return((unsigned long)(STCV)); };
|
|
#endif
|
|
|
|
#elif defined(TEENSYDUINO)
|
|
// Teensy
|
|
#define RADIOLIB_PLATFORM "Teensy"
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (uint8_t, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, short unsigned int frequency, long unsigned int duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t interruptNum, void (*userFunc)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, long unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#else
|
|
// other Arduino platforms not covered by the above list - this may or may not work
|
|
#define RADIOLIB_PLATFORM "Unknown Arduino"
|
|
#define RADIOLIB_UNKNOWN_PLATFORM
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
#define RADIOLIB_NC (0xFF)
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
#define RADIOLIB_DEFAULT_SPI_SETTINGS SPISettings(2000000, MSBFIRST, SPI_MODE0)
|
|
#define RADIOLIB_NONVOLATILE PROGMEM
|
|
#define RADIOLIB_NONVOLATILE_READ_BYTE(addr) pgm_read_byte(addr)
|
|
#define RADIOLIB_TYPE_ALIAS(type, alias) using alias = type;
|
|
|
|
// Arduino API callbacks
|
|
#define RADIOLIB_CB_ARGS_PIN_MODE (void, pinMode, uint8_t pin, uint8_t mode)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_WRITE (void, digitalWrite, uint8_t pin, uint8_t value)
|
|
#define RADIOLIB_CB_ARGS_DIGITAL_READ (int, digitalRead, uint8_t pin)
|
|
#define RADIOLIB_CB_ARGS_TONE (void, tone, uint8_t _pin, unsigned int frequency, unsigned long duration)
|
|
#define RADIOLIB_CB_ARGS_NO_TONE (void, noTone, uint8_t _pin)
|
|
#define RADIOLIB_CB_ARGS_ATTACH_INTERRUPT (void, attachInterrupt, uint8_t interruptNum, void (*userFunc)(void), int mode)
|
|
#define RADIOLIB_CB_ARGS_DETACH_INTERRUPT (void, detachInterrupt, uint8_t interruptNum)
|
|
#define RADIOLIB_CB_ARGS_YIELD (void, yield, void)
|
|
#define RADIOLIB_CB_ARGS_DELAY (void, delay, unsigned long ms)
|
|
#define RADIOLIB_CB_ARGS_DELAY_MICROSECONDS (void, delayMicroseconds, unsigned int us)
|
|
#define RADIOLIB_CB_ARGS_MILLIS (unsigned long, millis, void)
|
|
#define RADIOLIB_CB_ARGS_MICROS (unsigned long, micros, void)
|
|
#define RADIOLIB_CB_ARGS_PULSE_IN (unsigned long, pulseIn, uint8_t pin, uint8_t state, unsigned long timeout)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN (void, SPIbegin, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_BEGIN_TRANSACTION (void, SPIbeginTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_TRANSFER (uint8_t, SPItransfer, uint8_t b)
|
|
#define RADIOLIB_CB_ARGS_SPI_END_TRANSACTION (void, SPIendTransaction, void)
|
|
#define RADIOLIB_CB_ARGS_SPI_END (void, SPIend, void)
|
|
|
|
#endif
|
|
#endif
|
|
|
|
#else
|
|
// generic non-Arduino platform
|
|
#define RADIOLIB_PLATFORM "Generic"
|
|
|
|
// platform properties may be defined here, or somewhere else in the build system
|
|
#include "noarduino.h"
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable debug output.
|
|
* Warning: Debug output will slow down the whole system significantly.
|
|
* Also, it will result in larger compiled binary.
|
|
* Levels: debug - only main info
|
|
* verbose - full transcript of all SPI communication
|
|
*/
|
|
#if !defined(RADIOLIB_DEBUG)
|
|
//#define RADIOLIB_DEBUG
|
|
#endif
|
|
#if !defined(RADIOLIB_VERBOSE)
|
|
//#define RADIOLIB_VERBOSE
|
|
#endif
|
|
|
|
// set which output port should be used for debug output
|
|
// may be Serial port (on Arduino) or file like stdout or stderr (on generic platforms)
|
|
#if !defined(RADIOLIB_DEBUG_PORT)
|
|
#define RADIOLIB_DEBUG_PORT Serial
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable "paranoid" SPI mode
|
|
* Every write to an SPI register using SPI set function will be verified by a subsequent read operation.
|
|
* This improves reliablility, but slightly slows down communication.
|
|
* Note: Enabled by default.
|
|
*/
|
|
#if !defined(RADIOLIB_SPI_PARANOID)
|
|
#define RADIOLIB_SPI_PARANOID
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable parameter range checking
|
|
* RadioLib will check provided parameters (such as frequency) against limits determined by the device manufacturer.
|
|
* It is highly advised to keep this macro defined, removing it will allow invalid values to be set,
|
|
* possibly leading to bricked module and/or program crashing.
|
|
* Note: Enabled by default.
|
|
*/
|
|
#if !defined(RADIOLIB_CHECK_PARAMS)
|
|
#define RADIOLIB_CHECK_PARAMS
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable SX127x errata fix
|
|
* Warning: SX127x errata fix has been reported to cause issues with LoRa bandwidths lower than 62.5 kHz.
|
|
* It should only be enabled if you really are observing some errata-related issue.
|
|
* Note: Disabled by default.
|
|
*/
|
|
#if !defined(RADIOLIB_FIX_ERRATA_SX127X)
|
|
//#define RADIOLIB_FIX_ERRATA_SX127X
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable god mode - all methods and member variables in all classes will be made public, thus making them accessible from Arduino code.
|
|
* Warning: Come on, it's called GOD mode - obviously only use this if you know what you're doing.
|
|
* Failure to heed the above warning may result in bricked module.
|
|
*/
|
|
#if !defined(RADIOLIB_GODMODE)
|
|
//#define RADIOLIB_GODMODE
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable low-level hardware access
|
|
* This will make some hardware methods like SPI get/set accessible from the user sketch - think of it as "god mode lite"
|
|
* Warning: RadioLib won't stop you from writing invalid stuff into your device, so it's quite easy to brick your module with this.
|
|
*/
|
|
#if !defined(RADIOLIB_LOW_LEVEL)
|
|
//#define RADIOLIB_LOW_LEVEL
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable pre-defined modules when using RadioShield.
|
|
*/
|
|
#if !defined(RADIOLIB_RADIOSHIELD)
|
|
//#define RADIOLIB_RADIOSHIELD
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable interrupt-based timing control
|
|
* For details, see https://github.com/jgromes/RadioLib/wiki/Interrupt-Based-Timing
|
|
*/
|
|
#if !defined(RADIOLIB_INTERRUPT_TIMING)
|
|
//#define RADIOLIB_INTERRUPT_TIMING
|
|
#endif
|
|
|
|
/*
|
|
* Uncomment to enable static-only memory management: no dynamic allocation will be performed.
|
|
* Warning: Large static arrays will be created in some methods. It is not advised to send large packets in this mode.
|
|
*/
|
|
#if !defined(RADIOLIB_STATIC_ONLY)
|
|
//#define RADIOLIB_STATIC_ONLY
|
|
#endif
|
|
|
|
// set the size of static arrays to use
|
|
#if !defined(RADIOLIB_STATIC_ARRAY_SIZE)
|
|
#define RADIOLIB_STATIC_ARRAY_SIZE (256)
|
|
#endif
|
|
|
|
|
|
// This only compiles on STM32 boards with SUBGHZ module, but also
|
|
// include when generating docs
|
|
#if (!defined(ARDUINO_ARCH_STM32) || !defined(SUBGHZSPI_BASE)) && !defined(DOXYGEN)
|
|
#define RADIOLIB_EXCLUDE_STM32WLX
|
|
#endif
|
|
|
|
#if defined(RADIOLIB_DEBUG)
|
|
#if defined(RADIOLIB_BUILD_ARDUINO)
|
|
#define RADIOLIB_DEBUG_PRINT(...) { RADIOLIB_DEBUG_PORT.print(__VA_ARGS__); }
|
|
#define RADIOLIB_DEBUG_PRINTLN(...) { RADIOLIB_DEBUG_PORT.println(__VA_ARGS__); }
|
|
#else
|
|
#if !defined(RADIOLIB_DEBUG_PRINT)
|
|
#define RADIOLIB_DEBUG_PRINT(...) { frintf(RADIOLIB_DEBUG_PORT, __VA_ARGS__); }
|
|
#endif
|
|
#if !defined(RADIOLIB_DEBUG_PRINTLN)
|
|
#define RADIOLIB_DEBUG_PRINTLN(...) { printf(RADIOLIB_DEBUG_PORT, __VA_ARGS__ "\n"); }
|
|
#endif
|
|
#endif
|
|
#else
|
|
#define RADIOLIB_DEBUG_PRINT(...) {}
|
|
#define RADIOLIB_DEBUG_PRINTLN(...) {}
|
|
#endif
|
|
|
|
#if defined(RADIOLIB_VERBOSE)
|
|
#define RADIOLIB_VERBOSE_PRINT(...) RADIOLIB_DEBUG_PRINT(__VA_ARGS__)
|
|
#define RADIOLIB_VERBOSE_PRINTLN(...) RADIOLIB_DEBUG_PRINTLN(__VA_ARGS__)
|
|
#else
|
|
#define RADIOLIB_VERBOSE_PRINT(...) {}
|
|
#define RADIOLIB_VERBOSE_PRINTLN(...) {}
|
|
#endif
|
|
|
|
/*!
|
|
\brief A simple assert macro, will return on error.
|
|
*/
|
|
#define RADIOLIB_ASSERT(STATEVAR) { if((STATEVAR) != RADIOLIB_ERR_NONE) { return(STATEVAR); } }
|
|
|
|
/*
|
|
* Macros that create callback for the hardware abstraction layer.
|
|
*
|
|
* This is the most evil thing I have ever created. I am deeply sorry to anyone currently reading this text.
|
|
* Come one, come all and witness the horror:
|
|
* Variadics, forced expansions, inlined function, string concatenation, and it even messes up access specifiers.
|
|
*/
|
|
#define RADIOLIB_FIRST(arg, ...) arg
|
|
#define RADIOLIB_REST(arg, ...) __VA_ARGS__
|
|
#define RADIOLIB_EXP(...) __VA_ARGS__
|
|
|
|
#define RADIOLIB_GENERATE_CALLBACK_RET_FUNC(RET, FUNC, ...) public: typedef RET (*FUNC##_cb_t)(__VA_ARGS__); void setCb_##FUNC(FUNC##_cb_t cb) { cb_##FUNC = cb; }; private: FUNC##_cb_t cb_##FUNC = nullptr;
|
|
#define RADIOLIB_GENERATE_CALLBACK_RET(RET, ...) RADIOLIB_GENERATE_CALLBACK_RET_FUNC(RET, __VA_ARGS__)
|
|
#define RADIOLIB_GENERATE_CALLBACK(CB) RADIOLIB_GENERATE_CALLBACK_RET(RADIOLIB_EXP(RADIOLIB_FIRST CB), RADIOLIB_EXP(RADIOLIB_REST CB))
|
|
|
|
#define RADIOLIB_GENERATE_CALLBACK_SPI_RET_FUNC(RET, FUNC, ...) public: typedef RET (Module::*FUNC##_cb_t)(__VA_ARGS__); void setCb_##FUNC(FUNC##_cb_t cb) { cb_##FUNC = cb; }; private: FUNC##_cb_t cb_##FUNC = nullptr;
|
|
#define RADIOLIB_GENERATE_CALLBACK_SPI_RET(RET, ...) RADIOLIB_GENERATE_CALLBACK_SPI_RET_FUNC(RET, __VA_ARGS__)
|
|
#define RADIOLIB_GENERATE_CALLBACK_SPI(CB) RADIOLIB_GENERATE_CALLBACK_SPI_RET(RADIOLIB_EXP(RADIOLIB_FIRST CB), RADIOLIB_EXP(RADIOLIB_REST CB))
|
|
|
|
/*!
|
|
\brief Macro to check variable is within constraints - this is commonly used to check parameter ranges. Requires RADIOLIB_CHECK_RANGE to be enabled
|
|
*/
|
|
#if defined(RADIOLIB_CHECK_PARAMS)
|
|
#define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) { if(!(((VAR) >= (MIN)) && ((VAR) <= (MAX)))) { return(ERR); } }
|
|
#else
|
|
#define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) {}
|
|
#endif
|
|
|
|
#if defined(RADIOLIB_FIX_ERRATA_SX127X)
|
|
#define RADIOLIB_ERRATA_SX127X(...) { errataFix(__VA_ARGS__); }
|
|
#else
|
|
#define RADIOLIB_ERRATA_SX127X(...) {}
|
|
#endif
|
|
|
|
// version definitions
|
|
#define RADIOLIB_VERSION_MAJOR (0x05)
|
|
#define RADIOLIB_VERSION_MINOR (0x05)
|
|
#define RADIOLIB_VERSION_PATCH (0x00)
|
|
#define RADIOLIB_VERSION_EXTRA (0x00)
|
|
|
|
#define RADIOLIB_VERSION ((RADIOLIB_VERSION_MAJOR << 24) | (RADIOLIB_VERSION_MINOR << 16) | (RADIOLIB_VERSION_PATCH << 8) | (RADIOLIB_VERSION_EXTRA))
|
|
|
|
#endif
|