kopia lustrzana https://github.com/jgromes/RadioLib
100 wiersze
2.6 KiB
C++
100 wiersze
2.6 KiB
C++
/*
|
|
RadioLib RF69 Blocking Transmit Example
|
|
|
|
This example transmits packets using RF69 FSK radio module.
|
|
Each packet contains up to 64 bytes of data, in the form of:
|
|
- Arduino String
|
|
- null-terminated char array (C-string)
|
|
- arbitrary binary data (byte array)
|
|
|
|
Using blocking transmit is not recommended, as it will lead
|
|
to inefficient use of processor time!
|
|
Instead, interrupt transmit is recommended.
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
*/
|
|
|
|
// include the library
|
|
#include <RadioLib.h>
|
|
|
|
// RF69 has the following connections:
|
|
// CS pin: 10
|
|
// DIO0 pin: 2
|
|
// RESET pin: 3
|
|
RF69 radio = new Module(10, 2, 3);
|
|
|
|
// or using RadioShield
|
|
// https://github.com/jgromes/RadioShield
|
|
//RF69 radio = RadioShield.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize RF69 with default settings
|
|
Serial.print(F("[RF69] Initializing ... "));
|
|
int state = radio.begin();
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
|
|
// NOTE: some RF69 modules use high power output,
|
|
// those are usually marked RF69H(C/CW).
|
|
// To configure RadioLib for these modules,
|
|
// you must call setOutputPower() with
|
|
// second argument set to true.
|
|
/*
|
|
Serial.print(F("[RF69] Setting high power module ... "));
|
|
state = radio.setOutputPower(20, true);
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
*/
|
|
}
|
|
|
|
// counter to keep track of transmitted packets
|
|
int count = 0;
|
|
|
|
void loop() {
|
|
Serial.print(F("[RF69] Transmitting packet ... "));
|
|
|
|
// you can transmit C-string or Arduino string up to 64 characters long
|
|
String str = "Hello World! #" + String(count++);
|
|
int state = radio.transmit(str);
|
|
|
|
// you can also transmit byte array up to 64 bytes long
|
|
/*
|
|
byte byteArr[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF};
|
|
int state = radio.transmit(byteArr, 8);
|
|
*/
|
|
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(F("success!"));
|
|
|
|
} else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
|
|
// the supplied packet was longer than 64 bytes
|
|
Serial.println(F("too long!"));
|
|
|
|
} else {
|
|
// some other error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
|
|
}
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|