kopia lustrzana https://github.com/jgromes/RadioLib
83 wiersze
2.2 KiB
C++
83 wiersze
2.2 KiB
C++
/*
|
|
KiteLib SX127x Transmit Example
|
|
|
|
This example transmits packets using SX1278 LoRa radio module.
|
|
Each packet contains up to 256 bytes of data, in the form of:
|
|
- Arduino String
|
|
- null-terminated char array (C-string)
|
|
- arbitrary binary data (byte array)
|
|
|
|
Other modules from SX127x family can also be used.
|
|
SX1272 lora = Kite.ModuleA;
|
|
SX1273 lora = Kite.ModuleA;
|
|
SX1276 lora = Kite.ModuleA;
|
|
SX1277 lora = Kite.ModuleA;
|
|
SX1279 lora = Kite.ModuleA;
|
|
*/
|
|
|
|
// include the library
|
|
#include <KiteLib.h>
|
|
|
|
// SX1278 module is in slot A on the shield
|
|
SX1278 lora = Kite.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1278 with default settings
|
|
Serial.print(F("[SX1278] Initializing ... "));
|
|
// carrier frequency: 434.0 MHz
|
|
// bandwidth: 125.0 kHz
|
|
// spreading factor: 9
|
|
// coding rate: 7
|
|
// sync word: 0x12
|
|
// output power: 17 dBm
|
|
// current limit: 100 mA
|
|
// preamble length: 8 symbols
|
|
// amplifier gain: 0 (automatic gain control)
|
|
int state = lora.begin();
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[SX1278] Transmitting packet ... "));
|
|
|
|
// you can transmit C-string or Arduino string up to
|
|
// 256 characters long
|
|
int state = lora.transmit("Hello World!");
|
|
|
|
// you can also transmit byte array up to 256 bytes long
|
|
/*
|
|
byte byteArr[] = {0x01, 0x23, 0x45, 0x56, 0x78, 0xAB, 0xCD, 0xEF};
|
|
int state = lora.transmit(byteArr, 8);
|
|
*/
|
|
|
|
if (state == ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(" success!");
|
|
|
|
// print measured data rate
|
|
Serial.print("Datarate:\t");
|
|
Serial.print(lora.dataRate);
|
|
Serial.println(" bps");
|
|
|
|
} else if (state == ERR_PACKET_TOO_LONG) {
|
|
// the supplied packet was longer than 256 bytes
|
|
Serial.println(" too long!");
|
|
|
|
} else if (state == ERR_TX_TIMEOUT) {
|
|
// timeout occured while transmitting packet
|
|
Serial.println(" timeout!");
|
|
|
|
}
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|