kopia lustrzana https://github.com/jgromes/RadioLib
79 wiersze
2.0 KiB
C++
79 wiersze
2.0 KiB
C++
/*
|
|
KiteLib SX1231 Receive Example
|
|
|
|
This example receives packets using SX1231 FSK radio module.
|
|
*/
|
|
|
|
// include the library
|
|
#include <KiteLib.h>
|
|
|
|
// SX1231 module is in slot A on the shield
|
|
SX1231 rf = Kite.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1231 with default settings
|
|
Serial.print(F("[SX1231] Initializing ... "));
|
|
// carrier frequency: 434.0 MHz
|
|
// bit rate: 48.0 kbps
|
|
// Rx bandwidth: 125.0 kHz
|
|
// frequency deviation: 50.0 kHz
|
|
// output power: 13 dBm
|
|
// sync word: 0x2D 0x01
|
|
byte state = rf.begin();
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
|
|
// you can change the sync word at runtime
|
|
// sync word can be up to 8 non-zero bytes
|
|
Serial.print(F("[SX1231] Settings sync word ... "));
|
|
uint8_t syncWord[] = {0x01, 0x23};
|
|
// sync word: 0x01 0x23
|
|
// length: 2
|
|
// tolerated error bits: 0
|
|
state == rf.setSyncWord(syncWord, 2);
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else if (state == ERR_INVALID_SYNC_WORD) {
|
|
Serial.println(F("invalid!"));
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[SX1231] Waiting for incoming transmission ... "));
|
|
|
|
// you can receive data as an Arduino String
|
|
String str;
|
|
int state = rf.receive(str);
|
|
|
|
// you can also receive data as byte array
|
|
/*
|
|
byte byteArr[8];
|
|
int state = rf.receive(byteArr, 8);
|
|
*/
|
|
|
|
if (state == ERR_NONE) {
|
|
// packet was successfully received
|
|
Serial.println(F("success!"));
|
|
|
|
// print the data of the packet
|
|
Serial.print(F("[SX1231] Data:\t\t"));
|
|
Serial.println(str);
|
|
|
|
} else if (state == ERR_RX_TIMEOUT) {
|
|
// timeout occurred while waiting for a packet
|
|
Serial.println(F("timeout!"));
|
|
|
|
} else if (state == ERR_CRC_MISMATCH) {
|
|
// packet was received, but is malformed
|
|
Serial.println(F("CRC error!"));
|
|
|
|
}
|
|
}
|