kopia lustrzana https://github.com/jgromes/RadioLib
73 wiersze
2.0 KiB
C++
73 wiersze
2.0 KiB
C++
/*
|
|
KiteLib SX1231 Transmit Example
|
|
|
|
This example transmits packets using SX1231 FSK radio module.
|
|
*/
|
|
|
|
// include the library
|
|
#include <KiteLib.h>
|
|
|
|
// SX1231 module is in slot A on the shield
|
|
SX1231 rf = Kite.ModuleA;
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// initialize SX1231 with default settings
|
|
Serial.print(F("[SX1231] Initializing ... "));
|
|
// carrier frequency: 434.0 MHz
|
|
// bit rate: 48.0 kbps
|
|
// Rx bandwidth: 125.0 kHz
|
|
// frequency deviation: 50.0 kHz
|
|
// output power: 13 dBm
|
|
// sync word: 0x2D 0x01
|
|
int state = rf.begin();
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
while (true);
|
|
}
|
|
|
|
// you can change the sync word at runtime
|
|
// sync word can be up to 8 non-zero bytes
|
|
Serial.print(F("[SX1231] Settings sync word ... "));
|
|
uint8_t syncWord[] = {0x01, 0x23};
|
|
// sync word: 0x01 0x23
|
|
// length: 2
|
|
// tolerated error bits: 0
|
|
state == rf.setSyncWord(syncWord, 2);
|
|
if (state == ERR_NONE) {
|
|
Serial.println(F("success!"));
|
|
} else if (state == ERR_INVALID_SYNC_WORD) {
|
|
Serial.println(F("invalid!"));
|
|
}
|
|
}
|
|
|
|
void loop() {
|
|
Serial.print(F("[SX1231] Transmitting packet ... "));
|
|
|
|
// you can transmit C-string or Arduino string up to 256 characters long
|
|
int state = rf.transmit("Hello World!");
|
|
|
|
// you can also transmit byte array up to 256 bytes long
|
|
/*
|
|
byte byteArr[] = {0x01, 0x23, 0x45, 0x56, 0x78, 0xAB, 0xCD, 0xEF};
|
|
int state = rf.transmit(byteArr, 8);
|
|
*/
|
|
|
|
if (state == ERR_NONE) {
|
|
// the packet was successfully transmitted
|
|
Serial.println(" success!");
|
|
|
|
} else if (state == ERR_PACKET_TOO_LONG) {
|
|
// the supplied packet was longer than 256 bytes
|
|
Serial.println(" too long!");
|
|
|
|
}
|
|
|
|
// wait for a second before transmitting again
|
|
delay(1000);
|
|
}
|